I am 82 years old and made up my mind I was going to check some things off my bucket list before I pass. One was getting a Ham license and learning to program and use my own radio. That is where you come in. I had simplex down pat last night but I must have looked at 10 videos on how to program a Baofeng radio for Repeaters. You did just what you promised. Taught me how to program my first repeater in about 5 minutes. The St. Lous Park Minnesota site I am programming has two frequencies. I assume I do the second one on the B or bottom part of the Channel. At least I have the top one done. I think that is the transmit area. This was three years ago so I doubt you monitor these comments any longer but if you do Thanks. I have no idea how people can make something so easy so complex. Anyway, thanks again. 2/8/2024.
Great tutorial! So many of the other videos on the topic leave out steps or move too fast or have poor vid’ quality. Thanks for taking it slow & easily breaking it down .
Thank you for this repeater programming tutorial. I didn´t know about being able to scan only the programmed chanels. I just bought a UV-17R. The menu numbers are different but now I know how to program it. - Dave - KB1YFR
This was a really , really helpful video and you did it so simple. I will have to say that I do like simple. Well, thanks again and I did subscribe to your channel. I wouldn't say that I am a geek....lol...but I think that I am changing!!!
Great Video. So question. The Repeater Freq. stays in the top line?? Add Channels to that on the bottom line. Gonna program mine tonight. Thank You in advance
Anything wrong with using dedicated rows A for output (monitor) and B for input (PTT)? I tried to participate in a net recently but they couldn't hear me. Set the Tx CTCSS tone on row B and everything.
Quick question: I have two (2) Baofeng UV-5Rs. I have them set and programed identically the same in the menu. I also have them on the same frequency. When I transmit from Baofeng radio # 1 to Baofeng radio # 2 it works fine however when I try to transmit from Baofeng radio # 2 to Baofeng radio # 1, the Baofeng radio # 1 will not pick up the transmission from the other Baofeng radio #2. SO I cannot hear any signal/transmission from Baofeng radio # 1. Do you think there is something wrong with Baofeng radio # 1?
I bought a used UV9R Plus that already had repeater frequencies programed in memory. Recently one of those repeaters added a PL tone. Can and how do I add this tone to the already programed repeater frequency or must I delete the frequency and reprogram it back in? Also, do I input the tone on R CTCS as well as T CTCS?
You mean the scanning feature? Once you have your frequencies programmed you hold it down to cycle through the stored channels. I don't know if it has any other usage.
Ok. I'm able to confirm radio check with other people, I have 2 of these radios both set up exactly the same, but I can't hear my transmission on the opposite radio. Anyone know why? I wanna leave one at home with my family when I'm out at work or out camping..
Hello sir how do I use my baofeng radio to call other countries. Like using Allstars or echolink. Can I program my baofen to dothat without using a computer . I already know how to used local repeaters for local coverage but how can I used them with radio only to call other countries
I am 82 years old and made up my mind I was going to check some things off my bucket list before I pass. One was getting a Ham license and learning to program and use my own radio. That is where you come in. I had simplex down pat last night but I must have looked at 10 videos on how to program a Baofeng radio for Repeaters. You did just what you promised. Taught me how to program my first repeater in about 5 minutes. The St. Lous Park Minnesota site I am programming has two frequencies. I assume I do the second one on the B or bottom part of the Channel. At least I have the top one done. I think that is the transmit area. This was three years ago so I doubt you monitor these comments any longer but if you do Thanks. I have no idea how people can make something so easy so complex. Anyway, thanks again. 2/8/2024.
Great job! I've just programmed my new UV-5R for my local repeaters. Crystal clear and thorough. Thank you!
OMG. That was one of the best HAM instructions. Better than all the HAM so called experts. Make more on this radio please.
I enjoy your video. I have been making the process to complicated and failing. You instructions make it simple. Thanks.
Great job walking us through this programming, it would have been nice to hear your hit the repeater 👍🏾
Great tutorial! So many of the other videos on the topic leave out steps or move too fast or have poor vid’ quality. Thanks for taking it slow & easily breaking it down .
Best video out! Great job, short sweet and straight to the point...
Good job you made it look very easy to follow
Keep up the good work
Well explained I’m working on my Technician license and this was a great how-to 👍
THANKS BEST SIMPLE WAY TO PROGRAM YOUR UV5R
Thank you for this repeater programming tutorial. I didn´t know about being able to scan only the programmed chanels. I just bought a UV-17R. The menu numbers are different but now I know how to program it. - Dave - KB1YFR
Best repeater setup video, short but concise thank you
Wow, that was a FANTASTIC tutorial! Thank you for making it easy to follow!!
This was a really , really helpful video and you did it so simple. I will have to say that I do like simple. Well, thanks again and I did subscribe to your channel. I wouldn't say that I am a geek....lol...but I think that I am changing!!!
Right on man thanks a lot I got a radio coming in a few days and had no idea but now I do.
easy and straight to the point, Thanks
Your video is awesome... made all simple!!! Thank you
Interesting thank you sir so much will check you out periodically....
Good info. Clear and easy understand. Thanks.
Thanks for making it simple, great job!
Really thank youuuuu very much for this video!!! Wow! Finally something understandable and very super useful!!!!
Just what I needed….thanks so much
I don’t know how well mines gonna work in my area because apparently there’s only two analog repeaters
This video was far mor easy to understand than the others on RUclips
Nice one! Thanks much for this.
Great Video. So question. The Repeater Freq. stays in the top line?? Add Channels to that on the bottom line. Gonna program mine tonight. Thank You in advance
Very good explanation! I could not save channel, iven I got confirm. Why???
Great video. Should really help. If a frequency does not show a offset what should I do ?
Good video
Thank you! I have two questions:
1) What about repeaters that have tone up/tone down?
2) What about repeaters that do not list a tone?
i never seen so many positive comments
Thank you for the video. What about the repeaters they are fire department I can use those too.
yours worked when all others failed
These Repeaters are in my area (Hollister). I would like for a GMRS group, im not sure if one already exists
Where is transmitting frq recorded ?
Nothing is showing in tone in my local repeater. Is it necessary to put tone? Please reply
Anything wrong with using dedicated rows A for output (monitor) and B for input (PTT)? I tried to participate in a net recently but they couldn't hear me. Set the Tx CTCSS tone on row B and everything.
Hello there. U just programmed only radio as repeater?
Quick question: I have two (2) Baofeng UV-5Rs. I have them set and programed identically the same in the menu. I also have them on the same frequency. When I transmit from Baofeng radio # 1 to Baofeng radio # 2 it works fine however when I try to transmit from Baofeng radio # 2 to Baofeng radio # 1, the Baofeng radio # 1 will not pick up the transmission from the other Baofeng radio #2. SO I cannot hear any signal/transmission from Baofeng radio # 1. Do you think there is something wrong with Baofeng radio # 1?
Did you ever find the solution to this? Same issue here.
I bought a used UV9R Plus that already had repeater frequencies programed in memory.
Recently one of those repeaters added a PL tone.
Can and how do I add this tone to the already programed repeater frequency or must I delete the frequency and reprogram it back in?
Also, do I input the tone on R CTCS as well as T CTCS?
I am having a problem getting my computer to recognize the radio..it doesn't show up on the port..perhaps it a driver? can seem to find one.
are you in the 831? i just got my licence.
Isn't there an output and input frequency? Why is there only one?
So if I want to listen to my local PD frequency do I have to go through these steps?
No!
The info for my local repeater does not show an offset value. Hoe do I proceed? Thanks.
I believe if there's no offset value shown, then you don't need one. And if you do need one, you'll have to contact the repeater owner for permission.
how to know rpeter frequncy anthor country????
What about '*' step ? show in other tutorials ?
You mean the scanning feature? Once you have your frequencies programmed you hold it down to cycle through the stored channels. I don't know if it has any other usage.
Thank u ...bofeang haters..not u thank u...
How far ? Can you talk using a repeater and utilizing this little radio ?
Line of sight plus a little.
Ok. I'm able to confirm radio check with other people, I have 2 of these radios both set up exactly the same, but I can't hear my transmission on the opposite radio. Anyone know why? I wanna leave one at home with my family when I'm out at work or out camping..
Smae issue here. Did you ever figure it out?
@@dkabbash still no. Even on other repeaters. Not sure what up.
Geezers, wow
Hello sir how do I use my baofeng radio to call other countries. Like using Allstars or echolink. Can I program my baofen to dothat without using a computer . I already know how to used local repeaters for local coverage but how can I used them with radio only to call other countries
To span a distance of that magnitude would require much more power and much larger antennas. It's really asking too much out of such a device
Old geezers? LOL!
These radios are absolute garbage and anything on RUclips telling otherwise is getting paid to do so
mine works great
i just got the local repeater to turn off when i tried to help a guy lost in the woods. fuck the local hams!
Hello there. U just programmed only radio as repeater?