BMW ISTA+ USB OBD K + DCAN DIAGNOSTIC CABLE ERROR Windows 10

Поделиться
HTML-код
  • Опубликовано: 30 окт 2024

Комментарии • 86

  • @1v1gaming8
    @1v1gaming8 Год назад +4

    You’re an absolute legend. I spent an hour and all I needed was this video. Subscribed instantly 👍🏼

  • @flriprsh2206
    @flriprsh2206 3 месяца назад +1

    Thank you so much Brother!
    For F-series with Ethernet cable there at the .ini was REMOTE writen. (And COM4 16s)
    Now E-series with obd cable (USB) works for me.
    Best regards, hope you are still alive.

  • @suntsoloba
    @suntsoloba 4 дня назад +1

    So many thanks man ! ❤😂Now it works, i firstly moved the file out of the folder cuz it didn t letted me modify inside the folder then i moved it back ! ❤🎉

  • @ClaudiuBal
    @ClaudiuBal 7 дней назад +1

    Thanks man. It’s all working good now!

  • @samdamti851
    @samdamti851 4 месяца назад +1

    Thank you! Worked great on E84 BMW

  • @НиколайГейн-д4е
    @НиколайГейн-д4е Год назад +1

    Очень помогло. БОЛЬШОЕ СПАСИБО!!!!!

  • @bmw__666
    @bmw__666 Год назад +1

    From Russia, man, you really help me, thx;

  • @osagyefoghanaba
    @osagyefoghanaba 2 года назад +2

    Great info…thank you so much bro 😎

  • @onesikm3
    @onesikm3 11 месяцев назад

    Hey bro have you ever connected to cars built before 1996? My car is a 94 m3 US model and I have the round connector only in the engine bay. I’ve had no luck and the forums say I need to make a special ads cable or something and it needs to be a serial cable only ?

    • @--unknown--
      @--unknown--  11 месяцев назад

      No! Never tried. But there is posibility to connect if you cen get adapter from round one to OBD2. I believe you should get some data out of it.

  • @pgtips7818
    @pgtips7818 4 месяца назад

    Hi Just downloaded not setup yet In vehicle interface do you have it set to Omitec interface (USB) or Ediabas default settings

    • @--unknown--
      @--unknown--  4 месяца назад +1

      Ediabas

    • @pgtips7818
      @pgtips7818 4 месяца назад +1

      Thank you will set it up and try it tommrow will let you know how it goes

    • @pgtips7818
      @pgtips7818 4 месяца назад +1

      Setup and running thanks alot

    • @--unknown--
      @--unknown--  4 месяца назад

      @@pgtips7818 enjoy 👍

  • @Elmefrio
    @Elmefrio Год назад +1

    Same error in connection, the cable operate correct with INPA but not with ISTA D, the port was in COM 3 setting but I've found the Ediabas file setting in REMOTE instead of STD:OBD. Now I change the set. Tomorrow I'll try on car if work. THANKS

    • @--unknown--
      @--unknown--  Год назад

      Mine works on EDIBAS settings

    • @Elmefrio
      @Elmefrio Год назад +1

      @@--unknown-- yes, I mean, I've found in the Bin Folder the set on REMOTE, I've now change with STD:OBD but I'm at home at the moment. Tomorrow morning will test on car. I think this was the issue.

    • @Elmefrio
      @Elmefrio Год назад +1

      Just tried right now. Problem solved. Many thanks bud! 😊

    • @--unknown--
      @--unknown--  Год назад +1

      @@Elmefrio you're welcome 👍

  • @a.h.m1328
    @a.h.m1328 Год назад +1

    you are the best , its working , thank you

  • @nachi1550
    @nachi1550 Год назад +1

    Thank you very much you saved me 😉

  • @4CAR.
    @4CAR. 4 месяца назад +1

    Thank you sir

  • @ryda1713
    @ryda1713 3 года назад +1

    It works in my case thnks bro !

  • @thomasbaumann5030
    @thomasbaumann5030 2 года назад +1

    Solved! Thank you so much!!!

  • @lucasdrouineau7497
    @lucasdrouineau7497 10 месяцев назад +1

    Thanks

  • @vincenthoulihan2998
    @vincenthoulihan2998 4 месяца назад

    This did work for me, then I tried my laptop again a month later and it didn’t work, same message coming back up again. When I tried the same fix it didn’t work, any other ideas? 😊

    • @--unknown--
      @--unknown--  4 месяца назад

      Try to reinstal tge software, or check your firewall. Maybe that blocking access to internet. Not sure but I believe it's needs ti be connected to internet when using the software

  • @rockygears5974
    @rockygears5974 2 месяца назад

    Not working for me, i have it already on com1 as inpa was working fine, installed ista changed ediabas.ini remote to std obd but still same connection error. Plz helppp

    • @--unknown--
      @--unknown--  2 месяца назад

      @@rockygears5974 check the settings sometimes there is selected something different than EDIABAS.

    • @fawi_9982
      @fawi_9982 2 месяца назад

      I have the same problem it‘s not working

    • @--unknown--
      @--unknown--  2 месяца назад

      @@fawi_9982 open software and in right up corner have a gear icon for settings. Check is there EDIABAS selected. If not then select and save

    • @kambezz
      @kambezz Месяц назад

      I have two questions:
      1. Can you please confirm if it can work for ISTA version 4.49?
      2. In my laptop in ports I get the option of standard serial over Bluetooth link (COM3). That can be a problem?

    • @--unknown--
      @--unknown--  Месяц назад

      @@kambezz mine is on 4.22.22.19912 system. I can't answer for other versions

  • @danute125
    @danute125 7 месяцев назад +1

    Thank you bro

  • @chewybacchus5918
    @chewybacchus5918 8 месяцев назад +1

    Thank you

  • @messedupeffects
    @messedupeffects Год назад +1

    Thanks mate

  • @basharabdulraheem4477
    @basharabdulraheem4477 Год назад +1

    Thank you! It worked!

  • @bigm2393
    @bigm2393 Год назад +1

    You saved me, thanks 💪

  • @armineantonian4424
    @armineantonian4424 Год назад

    Why mine is Remote and not STD:OBD how do i can have it

    • @maxcryptoinvest
      @maxcryptoinvest Год назад

      did you succeed ? I have the same thing.

    • @kPanosk
      @kPanosk Месяц назад

      Just write it. Replace REMOTE with STD:OBD. Close and save. Restart and try again. Check also Ediabas beibg checked in ISTA settings.

  • @germaneer776
    @germaneer776 3 года назад +2

    Not in my case :/

  • @sinankajtaz8860
    @sinankajtaz8860 8 месяцев назад +1

    Fucking legend it worked for me! Thanks!

  • @foo8195
    @foo8195 Год назад

    Thanks bro

  • @gezaeros4908
    @gezaeros4908 3 месяца назад

    Köszönöm szépen! :D :D

  • @Kasichs
    @Kasichs Год назад

    Pazīstams akcents. :D

  • @videolamajagua4063
    @videolamajagua4063 Год назад

    bro puede suvil el link de los drive para que pueda conectarlo ala pc

    • @--unknown--
      @--unknown--  Год назад +1

      I downloaded it here
      drive.google.com/drive/folders/11H4varfF7LuwC8xUexlqDICTztLUmzzJ?usp=sharing

    • @videolamajagua4063
      @videolamajagua4063 Год назад +1

      @@--unknown-- gracias bro

  • @jakubleschtina7734
    @jakubleschtina7734 2 года назад +1

    solved

  • @FullBoltOnGarage
    @FullBoltOnGarage 3 года назад

    I love you.

  • @serkangokce4050
    @serkangokce4050 Год назад

    i need to download ista my car is bmw f01

    • @serkangokce4050
      @serkangokce4050 Год назад

      can you help me to download the program

    • @--unknown--
      @--unknown--  Год назад

      @@serkangokce4050
      Here is the link
      ISTA IS FREE
      I downloaded it here
      drive.google.com/drive/folders/11H4varfF7LuwC8xUexlqDICTztLUmzzJ?usp=sharing

    • @serkangokce4050
      @serkangokce4050 Год назад

      what does the button on the cable do

    • @--unknown--
      @--unknown--  Год назад

      @@serkangokce4050 one is for reading and one for programming I guess

    • @serkangokce4050
      @serkangokce4050 Год назад

      I'm downloading pprograms now can you upload it for me