It does good for Kings but not 100 tubes using Gambler Tobacco. Thinking of getting a HK-3. It won't run with just pulling the finely cut Gambler Tobacco out of the bag. I have to cut it up more finely & it still Jams but it'll clear after pressing the start button again.
Hi there handyman thank you for the explanation about using the density operation I got my powermatic3 plus a very short time ago your video was very useful so if I want to make super kings I believe so use the top setting and the bottle for lose king size? Also wanted to let you know that making our cigarettes ourselves are better than shop shop broad cigarettes commercial cigarettes as they contain different poisons that they used to preserve the cigarette and our cigarettes don't contain the said poisons again thank you for the the video it is helped out a lot and you should check out the powermatic 5 it does everything puts the tube on all you have to do is fill the two hoppers regards Mikey from the UK
my only issue with the powermatic 4 is it has a very weak spring for the pull lever, it causes the tray where you put the tabboco to stay open, meaning you pull it up and it droops down alittle. you have to HOLD the lever when you put more in. (and the mess.. the power matic 4 is an AWFUL mess.) I'll be picking this machine up today. this looks so neat, clean and fast.
Thanks for the video. I just started RYO'ing ~week ago. Already replacing that electric injector. Powermatic 3+ is on its way. Had to try to eliminate the packing bit as it's a problem. Also got the moisture meter in today so now I know that the moisture content is not the problem.
The Brigii Mini Vacuum works awesome to clean the inside, tube, top, underneath all very easily and quickly, highly recommend! :) I'm close to 9000 on mine, usually takes about 6 minutes for a pack and keep it all stored on a regular sized 11x17 cookie sheet, mess stays in the cookie sheet, the pm3+ is by far the best product I have bought for smokes and I make size 100's, it pays for itself after making 2 cartons! :)
What tabbaco do you use? I just got the my powermatic 3+ and have been trying to use American Club red ribbon cut but I keep getting that HOPPER error.
It’s taken me 3 hours to make 4 packs!! I’m so frustrated!! What am I doing wrong?? I try loosening up the tobacco, sometimes it works and most times it doesn’t 🙄😡 what a waste of tobacco?!
What size tubes are you using? I just got mine today and the hopper keeps showing up, so far I have made 2 packs of cigarettes successfully, have a pile that didn’t come out right. I am using 100 size tubes, which setting should I use?
@@handyman-network Thank you, I did that after trying all and it seems to work best. I bought a Powermatic 3+ from eBay and it only made 3 cigarettes and quit so I sent it back, which was a hassle because the seller wouldn’t respond. So I ordered this one from Amazon, the tray is the difference, this is just the 3 and has no tray.
I did take your advice on cutting up the tobacco, got sticks out and a piece of plastic. Since this is my first try at this I wasn’t sure which brand to buy so I bought Bouy from a local store. Cutting it up made a world of difference.
The indicator bars have nothing to do with the length only the density of the pack. I was using the top setting and could barely draw smoke through the cigarette. Went to the center setting and now they draw easily.
I buy Gambler tube cut brand gold. Has a cowboy on it. As long as it says cigarette cut on amy brand. It’s hard to find where I’m at but Smokers Express or Smokers choice outlets have em. Not sure if they’re nationwide or whatever.
Great video. Handyman/Contractor here as well!
It does good for Kings but not 100 tubes using Gambler Tobacco.
Thinking of getting a HK-3.
It won't run with just pulling the finely cut Gambler Tobacco out of the bag.
I have to cut it up more finely & it still Jams but it'll clear after pressing the start button again.
Hi there handyman thank you for the explanation about using the density operation I got my powermatic3 plus a very short time ago your video was very useful so if I want to make super kings I believe so use the top setting and the bottle for lose king size? Also wanted to let you know that making our cigarettes ourselves are better than shop shop broad cigarettes commercial cigarettes as they contain different poisons that they used to preserve the cigarette and our cigarettes don't contain the said poisons again thank you for the the video it is helped out a lot and you should check out the powermatic 5 it does everything puts the tube on all you have to do is fill the two hoppers regards Mikey from the UK
my only issue with the powermatic 4 is it has a very weak spring for the pull lever, it causes the tray where you put the tabboco to stay open, meaning you pull it up and it droops down alittle.
you have to HOLD the lever when you put more in. (and the mess.. the power matic 4 is an AWFUL mess.) I'll be picking this machine up today. this looks so neat, clean and fast.
Thanks for the video. I just started RYO'ing ~week ago. Already replacing that electric injector. Powermatic 3+ is on its way. Had to try to eliminate the packing bit as it's a problem. Also got the moisture meter in today so now I know that the moisture content is not the problem.
The Brigii Mini Vacuum works awesome to clean the inside, tube, top, underneath all very easily and quickly, highly recommend! :) I'm close to 9000 on mine, usually takes about 6 minutes for a pack and keep it all stored on a regular sized 11x17 cookie sheet, mess stays in the cookie sheet, the pm3+ is by far the best product I have bought for smokes and I make size 100's, it pays for itself after making 2 cartons! :)
Is this machine easy to take apart?
Really good video, explained how to use it very well. Thank you!
Can you reset the second counter?
Can you adjust how much tobacco goes into each cigarette? I don't like my cigarette too densely packed
1gr2
What tabbaco do you use? I just got the my powermatic 3+ and have been trying to use American Club red ribbon cut but I keep getting that HOPPER error.
Gambler
Ik heb dat ook met jps tabak. Wat kan je hier tegen doen?
pall mall tabak werkt het besten met deze machine@@dannyschouten3459
"This is kinda like a hobby to me." Yup we all have to find the thing we enjoy. Lol
It's a chore but not too too bad.
Fyi: if u get the "hopper" error, just press the start button again & it'll finish the cig.
just bought one in Denmark iit is fantastic special you are handicap with ms
Just bought one of these machines
How do hou add moisture to the tobacco
If tobacco is too dry, how do u moisturize it?
Very helpful!
It does roll 100s, mine does.
It’s taken me 3 hours to make 4 packs!! I’m so frustrated!! What am I doing wrong?? I try loosening up the tobacco, sometimes it works and most times it doesn’t 🙄😡 what a waste of tobacco?!
What size tubes are you using? I just got mine today and the hopper keeps showing up, so far I have made 2 packs of cigarettes successfully, have a pile that didn’t come out right. I am using 100 size tubes, which setting should I use?
I use king. If you are using 100s you need to put it on the highest possible density setting. The longest bar on top should work hopefully.
@@handyman-network Thank you, I did that after trying all and it seems to work best. I bought a Powermatic 3+ from eBay and it only made 3 cigarettes and quit so I sent it back, which was a hassle because the seller wouldn’t respond. So I ordered this one from Amazon, the tray is the difference, this is just the 3 and has no tray.
I did take your advice on cutting up the tobacco, got sticks out and a piece of plastic. Since this is my first try at this I wasn’t sure which brand to buy so I bought Bouy from a local store. Cutting it up made a world of difference.
The indicator bars have nothing to do with the length only the density of the pack. I was using the top setting and could barely draw smoke through the cigarette. Went to the center setting and now they draw easily.
Good information thank you
How much
yea true i have one
My machine overstuffs even on king size any suggestions?
Use the center setting
I can make a pack of cigarettes with my roll-a-matic 2 in 3 minutes
Prais,from
my old machine i had 50.000
User tip: use cigarette cut tobacco, not pipe. It will clog. Don’t be a cheap ass, get the cigarette cut tobacco
Where do you purchase your cigarette tobacco? I would like to find out the name$?
I buy Gambler tube cut brand gold. Has a cowboy on it. As long as it says cigarette cut on amy brand. It’s hard to find where I’m at but Smokers Express or Smokers choice outlets have em. Not sure if they’re nationwide or whatever.
So you're making a "user guide" for the powermatic 3, and you don't know that this machine does not roll 100's. Yeah, OK! FAIL