Here the slno and the signatures of the Pro and polling agents should be seen clearly on green paper seal after dealing the control unit , so the green side of GPS should be in outward position but here you have shown it in inward direction.
There is one major mistake after clear moke poll vote switch off machine and then start sealing process. If you do not switch off if close button is pressed by mistake creat severe problem.
Ec did a good job.Anyhow I would like to appeal in front of people of karnataka go and caste your vote for a better society and tomorrow by choosing better candidate without having caste, creed, clan, sion and religion.We are the backbone of our nation.Gm.
Kindly check there is some discrepancy while fixing green paper seal . Video at 4.00 showing green paper seal should be afixed in such a manner that its serial number should appear outward but at 4.40 the green strip seal is reversed and its serial number gets inward . Kindly correct this discrepancy.
secret ballot manual voting is preferable . Because in manual voting nobody knows whom ur voting But here VVpat knows to whom ur voting-and VVPAT can be tamperedwith .Though election officer responds to voters complaint he can not prove that the previous vote already polled was not tampered.
how many votes stores in one evm machine at a time n is the vvpat and evm count physically counted in mok poll ? and why only 15 votes it should b atleast 1500 votes, programmatically it can b set after 15 votes it can b set for perticular number is it possible to shuffle the candidate position on each polling booth to get unbiased results think on it
What I got that there is a glitch say election commission authority can delete or erase the actual vote results and can freshly input new votes 🤔 Is that possible?
The mock poll, which is conducted before the actual poll is for checking if the EVM operates properly. The Control Unit is sealed before starting the poll, the seals need to be broken to erase the results.
after the polling is done, all the EVMs are stored in a strong room. The transportation of EVMs from polling station to strong rooms is strictly controlled and monitored. Polling agents (representatives of candidates) also monitor the movement of EVMs. The strong room is covered by CCTV from all angles and the monitor to view the videos of these CCTV is available in the vicinity of the strong room. Anyone can see the monitors and CCTV feeds. The EVMs are store in the strong room till the day of counting of votes. During the entire process, all the public/ candidates/ agents have full knowledge of where the EMVs are and who al have entered the strong room. There is no scope of tampering with the EMVs.
@@Tehseennsr after mock poll you have to ensure that you pressed CRC keys (close, result and clear) and switch off the machine. You have to seal it before starting actual poll. You must begin mock poll at 6 am if polling agents are present or by 6:15 if they don't turn up.
chk this video 3.20 min onward. i think green paper seal has been put incorrectly. green portion mus be on top & visible to facilitate reading the number printed on it. if i am right, it's a blunder shown on video . how can u teach in wrong way.
You are absolutely right Mr. Subas. The number of Green paper seal must be on top and visible. Another example of Sarkari lethargy where babus die to maintain the status quo.
Before sealing the CU, you need to vote for each candidate including NOTA an almost equal number of times until the total amount of votes polled is at least 50. Then the results need to be viewed and cleared.
EVM मशीन की चिठ्ठीया गिन नहीं सकते..... तो कम से कम उसकी एक कॉपी वोटर को क्यु नहीं दे देते.....? इसका मतलब सच में राजा की जान तोते में हैं l यही इस देश का दुर्भाग्य है ....l
nice way to learn to conduct the poll in efficient way
धन्यवाद सरजी | बहुत ही खूब समझाया |
very to understand sealing of machine thanks atul
Very good... information... super
Super excellent... any doubts see the mobile,. And solve the problem. super training
nice content. really helpful
It is very useful, also request you to latest update
Here the slno and the signatures of the Pro and polling agents should be seen clearly on green paper seal after dealing the control unit , so the green side of GPS should be in outward position but here you have shown it in inward direction.
Hi
very good Election Comission. superb
Election kam ke liye upyukt.
Good effort by election commission of india .
very good for the democracy
😁😁😁😁😁 so funny m royal bond'girl...... ViDeo CON d2h...... nehru palace 😁😁😁😁
Very useful
Very useful..
There is one major mistake after clear moke poll vote switch off machine and then start sealing process. If you do not switch off if close button is pressed by mistake creat severe problem.
Ec did a good job.Anyhow I would like to appeal in front of people of karnataka go and caste your vote for a better society and tomorrow by choosing better candidate without having caste, creed, clan, sion and religion.We are the backbone of our nation.Gm.
Very nice great job
super demo
Kindly check there is some discrepancy while fixing green paper seal . Video at 4.00 showing green paper seal should be afixed in such a manner that its serial number should appear outward but at 4.40 the green strip seal is reversed and its serial number gets inward . Kindly correct this discrepancy.
Yes ,you are right
Yes, the green paper seal has not been inserted correctly,it should display the SL no.
Only A and B were told to us
@@raghushetty82 ab change ho gaya hai .... Pehle a b c d hota thaa
Useful information
55 namaste PM
Very good and helps me gaining confidence to work as PO
0:26 Ravi Kumar is the brand ambassador of Election commission of India 😁😁
Nice
secret ballot manual voting is preferable . Because in manual voting nobody knows whom ur voting But here VVpat knows to whom ur voting-and VVPAT can be tamperedwith .Though election officer responds to voters complaint he can not prove that the previous vote already polled was not tampered.
Good effort
how many votes stores in one evm machine at a time n is the vvpat and evm count physically counted in mok poll ? and why only 15 votes it should b atleast 1500 votes, programmatically it can b set after 15 votes it can b set for perticular number is it possible to shuffle the candidate position on each polling booth to get unbiased results think on it
Very clear ... Must watch video for presiding officers...
👍
Good
helpful VDO.
Everything is ok except green paper is inserted incorrectly.
What I got that there is a glitch say election commission authority can delete or erase the actual vote results and can freshly input new votes 🤔 Is that possible?
The mock poll, which is conducted before the actual poll is for checking if the EVM operates properly. The Control Unit is sealed before starting the poll, the seals need to be broken to erase the results.
after the polling is done, all the EVMs are stored in a strong room. The transportation of EVMs from polling station to strong rooms is strictly controlled and monitored. Polling agents (representatives of candidates) also monitor the movement of EVMs. The strong room is covered by CCTV from all angles and the monitor to view the videos of these CCTV is available in the vicinity of the strong room. Anyone can see the monitors and CCTV feeds. The EVMs are store in the strong room till the day of counting of votes.
During the entire process, all the public/ candidates/ agents have full knowledge of where the EMVs are and who al have entered the strong room. There is no scope of tampering with the EMVs.
Please update it ,now on the strip seal there are only A and B
OK. Sirji
Thanks a lot
Gujarat ma polling training ma ek pan video batavel nathi.Whatever election duty employer insurance ? I donot know
good
very good thanks to you
Very good
The video sound is pretty good, beyond my imagination
Nice sir
mast
Shouldn't the serial number of green seal be visible?
How to download videos??
well
how can I download this video in my mobile?
use a downloader app or Online downloader
green paper inserted incorrectly.Number of green paper should shown after ceiling.
Gautam Kumar
Eda full punjabi version mil jao
Serial no of green seal to be visible on top.
Should one switch off the cu after mock poll and switch on again at the time of actual poll?
Yes. That is how it goes
@@LoneHussian what if the mock poll ends late and the time of actual poll is due?
@@Tehseennsr after mock poll you have to ensure that you pressed CRC keys (close, result and clear) and switch off the machine. You have to seal it before starting actual poll. You must begin mock poll at 6 am if polling agents are present or by 6:15 if they don't turn up.
Mock poll clear krne ke bad CU ko switch off krna h ,then seal the machinery
Where is special address tag to be put above close button???
Green paper seal is wrongly inserted. The serial number should be visible after closing the compartment.
But sr num of green paper is not seen after sealing
We Indians trust Election Commission and proud of them for conducting fair elections.
😂
Election kam ke liye sabhi karmchari ko upukta.
Download
@@ramkrishnagaonkar2930
.
0
What is the procedure to be followed in case of defective evm?
I'm Stillsignedin Replacement of the defective evm by another evm machine is to be done in such case.
Good but control unit ko seal karne se pehle disconnect karna hai & green paper aapne galat lagaya hai.
Sealing k bad green paper pr likha bhag uper se niche kaise ho gaya
Very helpful.Thanks
chk this video 3.20 min onward. i think green paper seal has been put incorrectly. green portion mus be on top & visible to facilitate reading the number printed on it. if i am right, it's a blunder shown on video . how can u teach in wrong way.
I think you are talking about new evm in which we have to insert two green strips from both end. Isn't it?
Subas Misra Yes you r right. The number should be on top.
You are absolutely right Mr. Subas. The number of Green paper seal must be on top and visible. Another example of Sarkari lethargy where babus die to maintain the status quo.
Ritz 8
lnisamudhulika .com
आपने ग्रीन पेपर सील उलटी लगाई, इसका नंबर हमें दिखना चाहिए
UI
The serial no of green paper seale is not visible
हिंदी में सुनिए
Votting tym nota ko ik vote dala giaa but result tym 16 candidate koi koi vote ni milla
What is mock poll
Before sealing the CU, you need to vote for each candidate including NOTA an almost equal number of times until the total amount of votes polled is at least 50. Then the results need to be viewed and cleared.
Evm setting
Cong 🐕 barks
😂
constituency 108
party no 2
Super🙏🙏🙏🙏🙏
Keba ducment lagebo nke
50 vote mock poll including NOTA....
Yes
Ajay kumar
Poori duniya m banned Ho chuka h 30 yrs back... Even Japan bhi use nhi kerta.. Then why in India.... Why..
Wasi Ahmad all scrap comes to us for re use bcase v r extra smart to confuse the machine's
Seriously that's the best argument you have?
Amreesh
In malayalam
Where vvpat
বাংলা এভিএম মেশিন বোর্ডের
Fie
4:40
EVM मशीन की चिठ्ठीया गिन नहीं सकते.....
तो कम से कम उसकी एक कॉपी
वोटर को क्यु नहीं दे देते.....?
इसका मतलब सच में राजा की जान तोते में हैं l
यही इस देश का दुर्भाग्य है ....l
2004 and 2009 Elections done by EVM
జై కాంగ్రెస్
U tube must remove this video because it is confusing.the green paper seal is placed in two ways.there must be only one way.it is a big mistake.
Green paper sealing is incorrect.lt is confusing
हरी पत्र मुद्रा का नम्बर ऊपर दिखाई देना है
आप नीचे दबा दिए है जो गलत है ।
हिंदी में विडीयो बना लेते तो क्या हो जाता
गलत बताया है
GP KADKOL PRAKASH PDO
Very lucid demo......
Old vedio not sute for 2024
Koi bhi button dabao vote bjp ko hi jayega 🤣
Tm chutiya ho.padh likh lete to shyd voting khud bhi kara lete
2004 aur 2009 m bjp ko kyu nhi gya bhai
Lotus being national symbol otherwise removed get lost
EVM hatao desh bachao
Tera baap karayega itni janta ki voting aur counting
Very useful
Good
how can I download this video in my mobile?
Use tubemate
Very useful