I can’t believe that I finally fixed this humming noise in the background. I know the sound is not perfect yet, but I will continue to work on it! As mentioned in the video description, I also changed some things on the video editing. Can’t wait to read your comments ❤ BTW, what are your tips to remove this rust on the CPU? Was afraid to hurt it by making a too much deep cleaning. Did you enjoy this video? Please remember to: - Like it 👍 - Tell me what you think about it in the comments section 😍 - Share it on the social medias 😘 - Subscribe ❤ - Follow me on Instagram for more content: instagram.com/french.satisfactory/ 😷 Kisses from France 🇫🇷 Love you all! ❤
i always thought that the hum had a bit of a soothing effect to the videos, a bit if like i was in the room watching you clean the machines and stuff, but it is an improvement, keep on doing the good stuff :Dd
Well, for me it was a nightmare to have it on every video 😂 Worked hard to remove this and I'm now pretty happy to ear the result. But I get what you mean. Thanks for your comment ThosePixelsTho , hope your enjoyed the video ❤️
Another great video! I had a Dell desktop with a similar CPU, very solid machine. As for the rust on the CPU, try a Q-Tip with some light polishing compound. I use one called CeramaBryte. It is for stove tops, but works wonders on heatsinks/IHS. I don't know if you have that in France, but anything should be ok. In fact, the smoother the IHS, the better it will conduct heat! Hope this helps! EDIT: Leave the CPU in the socket when polishing so it doesn't move around.
Hey, great video, as satisfying as the others ! I was wondering if by any chances, you were planning on doing a video reviewing the gears you use to clean computers :) have a nice day !
Hi Sivenruot时梁 ! I still need to try some other cleaning techniques before think about a review video. But it's not impossible to see a video like this on this channel. In fact, it make sens. Time will answer 😉 Thanks a lot for your comment! Great to know you enjoyed the videos ❤️❤️❤️
That is one clean Compaq now. Some of these Athlon II X2 220s can be unlocked in the BIOS, and may have extra CPU cores. The sound seemed a little clearer to me, but I have tinnitus and sometimes can't tell if I'm hearing 'real' sounds like fans, or if it's my tinnitus. A bit mean of Compaq to not include PCI-E X16 slot, they didn't aim this at gamers, for sure.
Yeah definitely not a gaming PC 😅 Didn't know about this processor unlock. Looks interesting! Thanks for sharing! And thanks a lot for your fidelity MarkTheMorose! ❤️❤️
Hello again, Well where do I begin lets just say Bravo ! Bravo ! 👏. This Compaq Pc was still pretty dirty, for my liking until you got hold of it and worked your magic on it as always. As for the sound quality absolutely brilliant , don't get me wrong the humming sound never bothered me one bit though.... Now the laptop really looking forward to it !!! What caused the rust or markings on the CPU as I have never seen this before ?? . Anyhow many thanks again for all value time and effort you put in time and time again, just keep on doing what you do best.. See you round the corner for the next video... Love your work 👍👍😀
Thank you so much DR 3510! ❤️❤️❤️ I'm really happy to know that you noticed the sound improvement. I still have to improve it, but I'm now pretty happy of the current result. I was a bit surprised about this rust. Especially to see the computer still working 😅 Here also, I have to improve the cleaning techniques, and I will. I know my content is not perfect yet. But if I wanted to wait for perfect content, I wouldn't have even uploaded a single video yet so ... 😅 And yes! My next goal is that I clean a laptop. I feel that I'm technically pretty ready for it. So I hope that I will can do it for the next episode 🤩 This channel is lot of work as you can imagine, but reading comments like yours give so much energy 🥰 Sorry for my late reply, wanted to answer immediately when I saw your comment, but also wanted to take my time to answer it properly. Thanks again, it's so nice to have guys like you around ❤️❤️
@@french.satisfactory As for how to clean the CPU, the best option is to soak it in isopropyl alcohol and rub it with a cotton bud, though you have to be patient, take your time and repeat the process. Another good technique involves alcohol wipes, where you have more control over the force and how you apply it, though again you have to be persistent apply enough force. Trust me on this one, I deep clean my computer regularly on my own, as well as many other electronic devices (my XBOX for example) and I know my way around. One more tip is to use a microfiber cloth for the plastic case and the tempered glass (if the case has one). Second tip (though I assume you already know it), always replace thermal pads with thermal pads, not with thermal paste (by the way, make sure that the new pads are of the same size and thickness). Third tip: In order to remove this sticky substance (like that pink substance you removed from a heat sink in this video), use isopropyl alcohol and a very thin (almost like razor sharp thin) pry tool to carefully remove it. I would also recommend that you buy yourself an electronic duster. You will save a lot of money in the long run when you quit using this air cans (Wich by the way need to be handled very carefully, because this chemically created air leaves liquid marks if not applied properly). Anyway, I love your videos man, I learn a lot and I enjoy them a lot. Keep up the good work. I'm looking forward for your next video. Cheers, till the next time🙏💪🇬🇷🇨🇵
What a great comment 😍 I keep your advices in my notes for a later use. Thanks a lot for taking time writing it. Almost all the improvements I did on this channel are coming from comments like this.❤️❤️
@@french.satisfactory Silly me, I remember my tips one at a time, as I'm watching the video. 1. Sewing machine oil is ideal for fan bearings. 2. Cotton buds offer precision, for spots like the edges of the CPU for example. 3. When you are resitting the RAM sticks, make sure that the motherboard does not bend. It is very easy to snap the motherboard if you apply too much pressure while sitting the RAM sticks, resulting in over-bending it and effectively rendering it useless. 4. Anything you wash with water (case, heatsinks ectr.) you must let it air dry completely before using it. It's better if you dry it yourself (using a heat gun or something for example). Thank you for your kind words mate. When I see something nice I always like to point it out and give my humble opinion on how it can be done better. See you on your next video. 🙏💪🇬🇷🇨🇵 PS: Your shirt is like a trademark, I love it. Legendary!
Fun fact about your 4. I recorded the drying of the components with a hair dryer, but didn't keep it in the video because 30min+ is a bit too much 😅 In fact, I am using Sewing machine oil 🙂 And about my shirt. It is my favourite one since years. Some people remember me as the French with this red shirt when I'm going to party. So I wanted to find a place for it in my channel. Nice to know you like the idea ❤️ 2nd fun fact, I bought another one to be sure I have one cleaned when I'm doing the shooting for the channel 🤣
Another great video! For that rock solid paste, I use a q-tip and some cellulose thinner. It comes off pretty easy. Watch out for the plastics though :)
Hi Guybrush Thriftweed! What brand do you use as cellulose thinner? I will try soon with some products like: - WD-40 then ISO - "Goof-off" then ISO - Goo gone I'm open to any other suggestion for a try! My goal is to fins the best product for every situation. Thanks for your comment. Happy to know that you enjoyed the video ❤️❤️
@@french.satisfactory Just any generic one will do. I go to my local hardware store. Maybe it will work with regular thinner too. I just use the cellulose type because quite some years ago,someone advised it to clean my guns with it (works like a charm) and hey,it works on PC's too :)
Interesting. I will do a post on the community tab when I finished all my tests about this if you are interested in. Thanks for sharing Guybrush Thriftweed ❤️
You have inspired me to find some computers and do some cleaning too its just too satisfying, anyways i was able to find 2 computers in the laundry room lmao and it was a fun restoration no wonder why you enjoy making these videos. 😂👍
@@french.satisfactory well 😅 both of them didnt work (one was a dell gx660 and another one was from compaq pentinum 3) none the less i found a small itx pc from acer in a closet lmao gonna work on that one now 😛
Hi Rohaan, didn't even notice this comment. RUclips studio mystery... Enjoy the work on the Acer one, and think about taking before/after pics. I will probably open a IG account soon to see your computer cleaning guys ❤️
@@french.satisfactory oh just about time i was gonna ask for ur Instagram also, just got holidays now ill start working on that computer as soon as i get time
Thank you Tymoteusz Puzdrowski, happy to know you enjoyed the video ❤️ Yeah, I even planned to make a full restoration of a very old one. But I still have to prepare some things before 😉
Hi Game Clips Manuel85x! "skipp the north and south bridges" ? Not sure to have the ref of this 😅 But I get what you mean.. I guess?? If so, thanks a lot of your comment ❤️❤️
@@french.satisfactory Well what are they called ? Those extra dyes on the mobo. Was about to open up computer repair shop in 2020, then shiet hit the fan world wide, and i still see the world in brown colors, so i just chill now. Next best thing is recording gameplays xD
@@french.satisfactory Yea, the actual component on the mobo what you puts the paste on, whats it called ? Also been watching lots of laptops repair videos, with the soldering stuff, yikes that takes skill, i am scared to open up the lid even sometimes, lol Desktops are like kindergarden.
@@french.satisfactory Sad part is i just got out of business college in 2020 and was all hyped xD Now i just try to learn all the missing knowledge about computers i can till i feel safe again.
Yey, i was pretty surprised to see that it was possible to turn on the PC... I will try some tips to deeply clean it. But didn't have time to do it for the video. Just finished the video editing yesterday night 😅 Hope you enjoyed the video Flammable Redstone! And thanks for your comment ❤️
@@french.satisfactory I'm glad newer pc cases come with magnetic dust filters. Also I recommend you hosing down the case without the front io installed, it saves time and doesn't pose a risk of static electricity (it would not be there if the case was properly grounded) also it gets it clean soon. Also recommend getting a air duster, a old tyre inflator works best for me when cleaning heatsinks. Also dont forget to oil the fan beatings because they could've been running low of oil and can be running rough after a few years
Hi Flammable Redstone, Sorry for my late reply, my kid just got his worst night ever 😱 I also wanted to take my time to answer you properly. - I agree about the magnetic dust filters. Never had one because I'm using a MacBook Pro since years now. But I love the concept. - Well I did clean with water the case and from panel, but I will also unmount all the front panel next time. - About the air duster, I'm thinking about it more and more. There is a company who asked me for a sponsored content. But i want to take my type for these sponso. I will maybe ask couple of brand one of their air duster to test them and give you my feedback or something like that (will it works. not sure 😅). Don't know yet. - An old tyre inflator? Pretty smart I would say 🤩. I could maybe try it and make a cleaning tip video (or community tab post) or something. - I'm using sewing machine oil to lubricate the fans when they are not sealed Thanks for sharing theses tips, I add this comment in my improvements and tests note ❤️❤️
Well, he got sick because of the winter. We almost lost 10 degrees in 1-2 days here so .... Nothing so dangerous for him, but was an hard night for him, his mom, and his daddy of course 😉 His naps was pretty good today. Hope his night will be better today. Thanks for asking ❤️
Hi SennTheMan! You are not the 1st person who are telling me that, but honestly, I don't find any issue with this. Especially if I take mesures to be sure the capacitors are empty. Yeah I knew this. But thanks a lot to take care 🥰 In fact, I could test it with a voltmeter to be 100% sure. Let's do that! Nice to see you back in the comment section, Thanks a lot for your comment ❤️❤️
Hi Mihail! Well, I can't buy SDD HD and RAM for every PC I am cleaning. It cost too much money for the moment for a small channel as French Satisfactory. I prepare a video where I should upgrade the PC also added to the cleaning. So hope you will enjoy. But as you understood, I can't do that yet for every cleaning video 😅 Hope you understand. Hope you enjoyed the video. And thanks for all you comments. Saw that you already posted a comment plenty videos of this channel ❤️❤️
Hi RTM, I understand why you prefer to have Windows 7 than Linux on a PC, but this Operating System is not supported my Microsoft anymore. So in my opinion it's better to have less security breaches with Ubuntu 😉 Thanks for your comment, hope you enjoyed the video ❤️
Hi fiveer11! Good question. In fact, I'm not sure to open one one day. I'm afraid it takes me too much time. I should maybe check a discord of another RUclips channel to see if it really add value, how it works inside, and if it looks not too much time consuming.
I would love to, just need to find a good one for a video 😷 Thanks for your comment @chfghgdjiihhfgf-7869 I hope that you enjoyed watching this video ❤️ And sorry for this late reply, pretty busy personal and professional life lately 😇
Hi Rene! Wait, this remember me something... ooh yes somebody posted "Video From OHIO" on the RustyDusty last video. Thought it was you but visibly not. Is there a joke or something about Ohio ? I'm curious now 🤔 Remember you, just checked and saw that you already posted comments on 3 videos. So thanks for your fidelity!! This help a lot this channel to grow 🥰 Hope you enjoyed the video ❤️
Hi Miguel, Well, I'm not doing fake content in this channel. So I can't every time find dust masterpieces. On this episode I focused my efforts on the sound and video editing improvements. For sure I will continue to try finding crazy dusty computers, but don't hope that it will happens every 2 other week. Hope you will understand this. Don't really have another answer to give you 😅
Hi Stewart, Are your talking about Promosm website or something else ?? Because if you are talking about that, I will definitely not using it 😅 It is against YT therm and services to use .... Thanks for your wishes, hope you enjoyed the video ❤️
![OLD HP Desktop DEEP CLEANING [4K] (HP Pavilion a6322fr)](http://i.ytimg.com/vi/hwkIk6D5JQo/mqdefault.jpg)
I can’t believe that I finally fixed this humming noise in the background. I know the sound is not perfect yet, but I will continue to work on it! As mentioned in the video description, I also changed some things on the video editing. Can’t wait to read your comments ❤
BTW, what are your tips to remove this rust on the CPU? Was afraid to hurt it by making a too much deep cleaning.
Did you enjoy this video? Please remember to:
- Like it 👍
- Tell me what you think about it in the comments section 😍
- Share it on the social medias 😘
- Subscribe ❤
- Follow me on Instagram for more content: instagram.com/french.satisfactory/ 😷
Kisses from France 🇫🇷
Love you all! ❤
i always thought that the hum had a bit of a soothing effect to the videos, a bit if like i was in the room watching you clean the machines and stuff, but it is an improvement, keep on doing the good stuff :Dd
Well, for me it was a nightmare to have it on every video 😂 Worked hard to remove this and I'm now pretty happy to ear the result. But I get what you mean.
Thanks for your comment ThosePixelsTho , hope your enjoyed the video ❤️
i've never seen such rust on a cpu, imo it wont cause damage so not really necessary removing it, you did a good job, love your videos
Thank you very much Hornster ❤️
try to clean it with a blue eraser, it solves the oxidation in the ram, maybe it will also solve the processor
Another great video! I had a Dell desktop with a similar CPU, very solid machine. As for the rust on the CPU, try a Q-Tip with some light polishing compound. I use one called CeramaBryte. It is for stove tops, but works wonders on heatsinks/IHS. I don't know if you have that in France, but anything should be ok. In fact, the smoother the IHS, the better it will conduct heat! Hope this helps! EDIT: Leave the CPU in the socket when polishing so it doesn't move around.
Nice to know you enjoyed it Volvo240 ❤️ Did you notice a sound improvement? Thanks for the tips. I will try some things without recording on this CPU
@@french.satisfactory I did notice the sound! It was excellent!
❤️❤️❤️
Hey, great video, as satisfying as the others ! I was wondering if by any chances, you were planning on doing a video reviewing the gears you use to clean computers :) have a nice day !
Hi Sivenruot时梁 !
I still need to try some other cleaning techniques before think about a review video. But it's not impossible to see a video like this on this channel. In fact, it make sens. Time will answer 😉
Thanks a lot for your comment! Great to know you enjoyed the videos ❤️❤️❤️
WOW!! A very thorough cleaning. Very nice!! That looked like Compaq built that this morning! Excellent job.
Thank you very much Joe, happy you enjoyed ❤️❤️
I love these type of old hp or compaq pc case that open from wrong side 😂
ahah, true!
That is one clean Compaq now. Some of these Athlon II X2 220s can be unlocked in the BIOS, and may have extra CPU cores. The sound seemed a little clearer to me, but I have tinnitus and sometimes can't tell if I'm hearing 'real' sounds like fans, or if it's my tinnitus.
A bit mean of Compaq to not include PCI-E X16 slot, they didn't aim this at gamers, for sure.
Yeah definitely not a gaming PC 😅
Didn't know about this processor unlock. Looks interesting! Thanks for sharing!
And thanks a lot for your fidelity MarkTheMorose! ❤️❤️
Hello again, Well where do I begin lets just say Bravo ! Bravo ! 👏. This Compaq Pc was still pretty dirty, for my liking until you got hold of it and worked your magic on it as always. As for the sound quality absolutely brilliant , don't get me wrong the humming sound never bothered me one bit though.... Now the laptop really looking forward to it !!! What caused the rust or markings on the CPU as I have never seen this before ?? . Anyhow many thanks again for all value time and effort you put in time and time again, just keep on doing what you do best.. See you round the corner for the next video... Love your work 👍👍😀
Thank you so much DR 3510! ❤️❤️❤️
I'm really happy to know that you noticed the sound improvement. I still have to improve it, but I'm now pretty happy of the current result.
I was a bit surprised about this rust. Especially to see the computer still working 😅 Here also, I have to improve the cleaning techniques, and I will. I know my content is not perfect yet. But if I wanted to wait for perfect content, I wouldn't have even uploaded a single video yet so ... 😅
And yes! My next goal is that I clean a laptop. I feel that I'm technically pretty ready for it. So I hope that I will can do it for the next episode 🤩
This channel is lot of work as you can imagine, but reading comments like yours give so much energy 🥰
Sorry for my late reply, wanted to answer immediately when I saw your comment, but also wanted to take my time to answer it properly.
Thanks again, it's so nice to have guys like you around ❤️❤️
Another nice video by our French friend. I really enjoy your vids, keep up the good work
Thank you very much Νίκος ❤️❤️❤️
@@french.satisfactory As for how to clean the CPU, the best option is to soak it in isopropyl alcohol and rub it with a cotton bud, though you have to be patient, take your time and repeat the process. Another good technique involves alcohol wipes, where you have more control over the force and how you apply it, though again you have to be persistent apply enough force.
Trust me on this one, I deep clean my computer regularly on my own, as well as many other electronic devices (my XBOX for example) and I know my way around. One more tip is to use a microfiber cloth for the plastic case and the tempered glass (if the case has one).
Second tip (though I assume you already know it), always replace thermal pads with thermal pads, not with thermal paste (by the way, make sure that the new pads are of the same size and thickness).
Third tip: In order to remove this sticky substance (like that pink substance you removed from a heat sink in this video), use isopropyl alcohol and a very thin (almost like razor sharp thin) pry tool to carefully remove it.
I would also recommend that you buy yourself an electronic duster. You will save a lot of money in the long run when you quit using this air cans (Wich by the way need to be handled very carefully, because this chemically created air leaves liquid marks if not applied properly).
Anyway, I love your videos man, I learn a lot and I enjoy them a lot. Keep up the good work. I'm looking forward for your next video.
Cheers, till the next time🙏💪🇬🇷🇨🇵
What a great comment 😍 I keep your advices in my notes for a later use. Thanks a lot for taking time writing it. Almost all the improvements I did on this channel are coming from comments like this.❤️❤️
@@french.satisfactory Silly me, I remember my tips one at a time, as I'm watching the video.
1. Sewing machine oil is ideal for fan bearings.
2. Cotton buds offer precision, for spots like the edges of the CPU for example.
3. When you are resitting the RAM sticks, make sure that the motherboard does not bend. It is very easy to snap the motherboard if you apply too much pressure while sitting the RAM sticks, resulting in over-bending it and effectively rendering it useless.
4. Anything you wash with water (case, heatsinks ectr.) you must let it air dry completely before using it. It's better if you dry it yourself (using a heat gun or something for example).
Thank you for your kind words mate. When I see something nice I always like to point it out and give my humble opinion on how it can be done better.
See you on your next video. 🙏💪🇬🇷🇨🇵
PS: Your shirt is like a trademark, I love it. Legendary!
Fun fact about your 4. I recorded the drying of the components with a hair dryer, but didn't keep it in the video because 30min+ is a bit too much 😅
In fact, I am using Sewing machine oil 🙂
And about my shirt. It is my favourite one since years. Some people remember me as the French with this red shirt when I'm going to party. So I wanted to find a place for it in my channel. Nice to know you like the idea ❤️
2nd fun fact, I bought another one to be sure I have one cleaned when I'm doing the shooting for the channel 🤣
Another great video!
For that rock solid paste, I use a q-tip and some cellulose thinner. It comes off pretty easy. Watch out for the plastics though :)
Hi Guybrush Thriftweed! What brand do you use as cellulose thinner? I will try soon with some products like:
- WD-40 then ISO
- "Goof-off" then ISO
- Goo gone
I'm open to any other suggestion for a try! My goal is to fins the best product for every situation.
Thanks for your comment. Happy to know that you enjoyed the video ❤️❤️
@@french.satisfactory Just any generic one will do. I go to my local hardware store. Maybe it will work with regular thinner too. I just use the cellulose type because quite some years ago,someone advised it to clean my guns with it (works like a charm) and hey,it works on PC's too :)
Interesting. I will do a post on the community tab when I finished all my tests about this if you are interested in. Thanks for sharing Guybrush Thriftweed ❤️
@@french.satisfactory Bring it on!!! 👍
very nice bro aku menunggu kamu upload
Thank you very much Danang Tech! Nice to know you enjoyed ❤️❤️
Another great video from the cleaning master 👍💪💪💪😎😎
Thank you very much toasty beard! Happy you liked it 😍🥰🥰🥰❤️❤️
@@french.satisfactory your welcome dude 💪
je suis la fane de tes vidéo je te suis toujours
Merci beaucoup à toi dj pouic pouic! ça fait plaisir ❤️❤️
You have inspired me to find some computers and do some cleaning too its just too satisfying, anyways i was able to find 2 computers in the laundry room lmao and it was a fun restoration no wonder why you enjoy making these videos. 😂👍
Yeah!!! that's so great, happy to gave you some nice moments ❤️❤️❤️❤️
@@french.satisfactory well 😅 both of them didnt work (one was a dell gx660 and another one was from compaq pentinum 3) none the less i found a small itx pc from acer in a closet lmao gonna work on that one now 😛
Hi Rohaan, didn't even notice this comment. RUclips studio mystery... Enjoy the work on the Acer one, and think about taking before/after pics. I will probably open a IG account soon to see your computer cleaning guys ❤️
@@french.satisfactory oh just about time i was gonna ask for ur Instagram also, just got holidays now ill start working on that computer as soon as i get time
This cleaning is cool you make a great video. Can you make a video of cleaning old computer?
Thank you Tymoteusz Puzdrowski, happy to know you enjoyed the video ❤️
Yeah, I even planned to make a full restoration of a very old one. But I still have to prepare some things before 😉
Very nice method you can also learn .more here
Thank you much Shah Computer Works ❤️
Did you try to add a link? or are you talking about your YT channel ?
That PC got treated well 😁👍
😘
Remember when pc were actually very attractive?
What do you mean?
yey, that for sure 🤩
Haaa, i see so many skipp the north and south bridges cleaning but you seem to take the full run^^
Hi Game Clips Manuel85x!
"skipp the north and south bridges" ? Not sure to have the ref of this 😅 But I get what you mean.. I guess?? If so, thanks a lot of your comment ❤️❤️
@@french.satisfactory Well what are they called ? Those extra dyes on the mobo.
Was about to open up computer repair shop in 2020, then shiet hit the fan world wide, and i still see the world in brown colors, so i just chill now.
Next best thing is recording gameplays xD
oh you are talking about Thermal paste? Yeah... 2020... Bad timing 😷
@@french.satisfactory Yea, the actual component on the mobo what you puts the paste on, whats it called ?
Also been watching lots of laptops repair videos, with the soldering stuff, yikes that takes skill, i am scared to open up the lid even sometimes, lol
Desktops are like kindergarden.
@@french.satisfactory Sad part is i just got out of business college in 2020 and was all hyped xD
Now i just try to learn all the missing knowledge about computers i can till i feel safe again.
Which is the name of the oil you use for the fan bearings? 15:00
Hey NinjaMBR! Hope you are well!!
You can use several oils, but I'm using sewing machine one.
Hope you enjoyed the video ❤️
Lol, the processor must have been in hell. seeing that cooler gives me chills
Yey, i was pretty surprised to see that it was possible to turn on the PC... I will try some tips to deeply clean it. But didn't have time to do it for the video. Just finished the video editing yesterday night 😅
Hope you enjoyed the video Flammable Redstone! And thanks for your comment ❤️
@@french.satisfactory I'm glad newer pc cases come with magnetic dust filters. Also I recommend you hosing down the case without the front io installed, it saves time and doesn't pose a risk of static electricity (it would not be there if the case was properly grounded) also it gets it clean soon. Also recommend getting a air duster, a old tyre inflator works best for me when cleaning heatsinks. Also dont forget to oil the fan beatings because they could've been running low of oil and can be running rough after a few years
Hi Flammable Redstone,
Sorry for my late reply, my kid just got his worst night ever 😱 I also wanted to take my time to answer you properly.
- I agree about the magnetic dust filters. Never had one because I'm using a MacBook Pro since years now. But I love the concept.
- Well I did clean with water the case and from panel, but I will also unmount all the front panel next time.
- About the air duster, I'm thinking about it more and more. There is a company who asked me for a sponsored content. But i want to take my type for these sponso. I will maybe ask couple of brand one of their air duster to test them and give you my feedback or something like that (will it works. not sure 😅). Don't know yet.
- An old tyre inflator? Pretty smart I would say 🤩. I could maybe try it and make a cleaning tip video (or community tab post) or something.
- I'm using sewing machine oil to lubricate the fans when they are not sealed
Thanks for sharing theses tips, I add this comment in my improvements and tests note ❤️❤️
@@french.satisfactory oh, ok btw how's your son doing now? Am curious what happened
Well, he got sick because of the winter. We almost lost 10 degrees in 1-2 days here so .... Nothing so dangerous for him, but was an hard night for him, his mom, and his daddy of course 😉 His naps was pretty good today. Hope his night will be better today. Thanks for asking ❤️
Love your content! But i strongly advise you to NOT open up the Power supply, as it's capacitors can still give you a nasty shock.
Hi SennTheMan!
You are not the 1st person who are telling me that, but honestly, I don't find any issue with this. Especially if I take mesures to be sure the capacitors are empty. Yeah I knew this. But thanks a lot to take care 🥰
In fact, I could test it with a voltmeter to be 100% sure. Let's do that!
Nice to see you back in the comment section, Thanks a lot for your comment ❤️❤️
@@french.satisfactory 👍
Very ice.
What kind of liquid did you used to clean ram?
I am using Isopropyl Alcohol for that, just to clean the contacts.
Thanks for all your comments Param ❤️❤️
Top
Thank you Ricardo ❤️
I saw myself in the map im from Uzbekistan
Yey!! Hi from France Anti{X}rist666 🇫🇷❤️
Hope you enjoyed the video ❤️❤️
Way 👍☺️👏
Yey 😘😍❤️
And this motherboard dont have x16 slot for install graphics card 😂😂😂. Maybe manufactures forget to solder its slot in motherboard
Well, I guess it is just a way too much liminated components.But that's for sur a bit crazy 🤪
@@french.satisfactory 😅😅😅 Crazy ideas 💡 of manufactures Or maybe they want us to stop 🛑 buying their products 😂😂😂😂
@@paramcomputers007 or they want us buy a new one if we want an upgrade. that's currently the case for Apple products 😅
Please put a ssd on it
Hi Mihail!
Well, I can't buy SDD HD and RAM for every PC I am cleaning. It cost too much money for the moment for a small channel as French Satisfactory.
I prepare a video where I should upgrade the PC also added to the cleaning. So hope you will enjoy. But as you understood, I can't do that yet for every cleaning video 😅 Hope you understand.
Hope you enjoyed the video. And thanks for all you comments. Saw that you already posted a comment plenty videos of this channel ❤️❤️
Install windows 7 on dc7800
Hi RTM,
I understand why you prefer to have Windows 7 than Linux on a PC, but this Operating System is not supported my Microsoft anymore. So in my opinion it's better to have less security breaches with Ubuntu 😉
Thanks for your comment, hope you enjoyed the video ❤️
@@french.satisfactory just install it
why for you have a Win7 on this computer should be the right option?
@@french.satisfactory yea, cuz drivers
And make a video to install windows vista and 7 on usb and all footage and check if works
Do you have a Discord?
Hi fiveer11!
Good question. In fact, I'm not sure to open one one day. I'm afraid it takes me too much time.
I should maybe check a discord of another RUclips channel to see if it really add value, how it works inside, and if it looks not too much time consuming.
Create work bro
Thank you very much @Shobiaki-23 ! Glad to know you enjoyed this video ❤️❤️
38 Like 🖥️⌨️🖱️
Hope you was the 38th 😍🥰❤️
We are now at 72 Likes! Pretty nice from you guys ❤️
FIX Xbox seriesx ❤
I would love to, just need to find a good one for a video 😷
Thanks for your comment @chfghgdjiihhfgf-7869 I hope that you enjoyed watching this video ❤️
And sorry for this late reply, pretty busy personal and professional life lately 😇
Oof. Another early 10s Compaq with no pcie x16 slot. No GPU upgrade path just because HP wanted to shave cents off their costs. HP are the worst.
Yeah... I don't understand this. Honestly it cost what? 10 cents per slot to add them? it's a bit ridiculous.
Hope you enjoyed the video BTW ❤️
the pc was made in ohio
Hi Rene!
Wait, this remember me something... ooh yes somebody posted "Video From OHIO" on the RustyDusty last video. Thought it was you but visibly not. Is there a joke or something about Ohio ? I'm curious now 🤔
Remember you, just checked and saw that you already posted comments on 3 videos. So thanks for your fidelity!! This help a lot this channel to grow 🥰
Hope you enjoyed the video ❤️
Cleaning? That's not a dirty PC....
Hi Miguel,
Well, I'm not doing fake content in this channel. So I can't every time find dust masterpieces. On this episode I focused my efforts on the sound and video editing improvements. For sure I will continue to try finding crazy dusty computers, but don't hope that it will happens every 2 other week.
Hope you will understand this. Don't really have another answer to give you 😅
I hope you the best success. You should look into using 'Promosm'!
Hi Stewart,
Are your talking about Promosm website or something else ?? Because if you are talking about that, I will definitely not using it 😅 It is against YT therm and services to use ....
Thanks for your wishes, hope you enjoyed the video ❤️