BMW E46 ELECTRIC FAN FIX

Поделиться
HTML-код
  • Опубликовано: 13 янв 2025

Комментарии • 35

  • @eltoro777
    @eltoro777 3 года назад +9

    Also. To everyone with this problem. IF YOUR AC LINES ARE LOW ON COOLANT. THE FAN RELAY WILL NOT TURN ON. YOU HAVE TO EMPTY YOUR AC LINES AND FILL AND BLEED THEM WITH NEW REFRIGERANT. ACC LINE AFFECT THE FAN RELAY. JUST SOMETHING I LEARNED RECENTLY

    • @VividEdg3
      @VividEdg3 2 года назад

      Is this true my AC refrigerator is empty. I'm trying to test my electric fan but when I press the AC button my electric fan doesn't come on.

    • @camdenwilson9168
      @camdenwilson9168 10 месяцев назад

      Thanks for this. I was wondering why it wont turn on and you solved it for me. 🙏

  • @olddog123
    @olddog123 4 года назад +2

    Would disconnecting the battery clear the fault?

  • @sergiourquijo4000
    @sergiourquijo4000 4 года назад +1

    man i have just the same problem with the temperature gauge as you. How do you read the temperature from the screen???

  • @Yophillips3272
    @Yophillips3272 4 года назад +1

    How did you remove the fan with leaving the bumper on?

    • @HowToDoitright
      @HowToDoitright  4 года назад +1

      You have to remove the front engine fan first. No need to remove the bumper

    • @Yophillips3272
      @Yophillips3272 4 года назад +1

      @@HowToDoitright So just remove the 4 bolts and just pull it out from the top?

  • @ricardopelc-wesoly3483
    @ricardopelc-wesoly3483 Год назад

    So your initial auxiliary fan was dead and by changing it over it set off error codes in the dme, correct!

    • @HowToDoitright
      @HowToDoitright  Год назад

      Huh ?

    • @ricardopelc-wesoly3483
      @ricardopelc-wesoly3483 Год назад

      @@HowToDoitright Sorry im english, so your fan was not coming on, did it set off any error codes, sometimes the car will set off error codes making the fan not work, by clearing error codes with a scanner it might come on.

    • @ricardopelc-wesoly3483
      @ricardopelc-wesoly3483 Год назад

      @@HowToDoitright So the temp sensor more than likely triggered the fault in the dme.

    • @HowToDoitright
      @HowToDoitright  Год назад

      @@ricardopelc-wesoly3483 no error codes were there.

    • @ricardopelc-wesoly3483
      @ricardopelc-wesoly3483 Год назад

      @@HowToDoitright 2.14 in you say that you had error codes on the fan!

  • @eltoro777
    @eltoro777 3 года назад

    Can you link me with how to fix INPA. Mine doesn't show e46 as an option okm the vehicle select. ?? It has all other bmw series. Even the newer series. But didn't show e46?? Thank you brother.

    • @HowToDoitright
      @HowToDoitright  3 года назад

      Sorry bro I don’t have a software and the car anymore.

    • @eltoro777
      @eltoro777 3 года назад

      @@HowToDoitright no worries brother. Did you remember if it's something I can change within INPA? Like a setting change or something in the menus?

  • @jakofall79
    @jakofall79 5 лет назад

    Can you give me a full description of the inpa software and the cable appreciate it much

    • @HowToDoitright
      @HowToDoitright  5 лет назад

      cash money it’s a lot to cover in a written description. You may need to do some research and read about it. Lots of documentation on google.

  • @mannabatth4092
    @mannabatth4092 3 года назад +1

    Can u show me what temperature ur gearbox runs on hot day when u pushing it bit hard ,

  • @jakofall79
    @jakofall79 5 лет назад

    Does it show a fault on the dash or something you only see when hooking up the computer, and does it have to be the inpa or could any code reader do the job

  • @renjder
    @renjder 4 года назад +1

    hi thank you,,, i also bought a inpa and cable from wish and i have a different inpa software version ...
    so i took a version from bimmergeeks...
    no turning on fan when engine gets on temperature gauge on the middle
    it turns on when i connect the two cables from the sensor together
    and take battery cables off and it turns off
    ,or turns on with inpa but doesnt turn off with inpa f4 or it turns on with inpa and not turning off with switch off
    or it turns on direct minus and plus to battery and turns off when disconnect from battery
    i also notice my airco pressure is low because of last years little engine refresh all coolant and gasket and oil etcetra etcetra,,
    thanks for all help
    helpppppppppppppppppppppppppppppppppppppppppppppppp
    thanks to u all,,,
    greatings a Kurdish boy living in the Netherlands..

    • @HowToDoitright
      @HowToDoitright  4 года назад +1

      I was seeing a similar problem on my E46. Tried so much to troubleshoot and after changing bunch of parts and spending $$$ I gave up and sold my car. A lot of people I have seen endup wiring the fan directly with a switch inside and they just control it manually when they drive and turn if off when they reach home. Kind of stupid but oh well howelese to fix it.

    • @voyagerkav
      @voyagerkav 5 месяцев назад

      ​@@HowToDoitright i did the same after i try with 3 new electric fan

  • @icecolde6898
    @icecolde6898 3 года назад +1

    I manage to activate fan but it eventually turns off after 40 secs

    • @HowToDoitright
      @HowToDoitright  3 года назад +1

      Yeah fans in these cars sucks. I got fed up and endup selling it

  • @dilix95
    @dilix95 5 лет назад +2

    windows xp oh my