Toyota Camry 2005 head unit installation
HTML-код
- Опубликовано: 10 окт 2021
- This video shows the installation of Android head unit in Toyota Camry 2005 model, with reverse camera.
Link to the unit
2 din android 9.0 Universal Car Multimedia Player Car Radio Player Stereo for Toyota VIOS CROWN CAMRY HIACE PREVIA COROLLA RAV4
a.aliexpress.com/_mKsIPiO 
Хобби
Thanks helped me install mines today I appreciate u so much💯💯💯💯💯💯
Please subscribe and support us . Thanks
Good job mate. Cheers
Thank you! Cheers!
Thank you!
Thanks for your comment. Please subscribe and support us.
Great
Good job
Thank you :) .. pls subscribe and support us
Hey, this is really good. I have couple of questions. 1) If we use Apple CarPlay, do we still need to connect GPS antenna? 2) I see you had this unit for 2 years, is the unit still working fine?
Does this stereo have a good visibility in the bright sunlight? Is it bright enough to use navigation in the bright day light?
It is bright enough . Pls subscribe and support us . Thanks
❤❤❤❤❤
You don't show how you run the wires for the reversing camera into the car. Did you have to drill a hole under the number plate?
Yes , you have to drill a hole for it . Connections are all same for all units and we have explained it in different videos . So skipped it in this .
I’ve put in the headunit but the plastic trim for the headunit won’t fit back in could you tell me how you put yours back in.
Check the previous comments , already replied there .. you need to cut the existing frame a little bit
what is the max screen size you can put in Camry 2005 ?
If you want to install an unit which is more than 2 din size, you have to order with the facio. It’s costly and we felt it’s not worth considering the model of the vehicle. You can browse in Aliexpress for different models. The unit we installed is in the video description. Pls subscribe and support us. Thanks
Hi, Brissy Mallus; thanks for the video. I am planning to have one installed.
Can we mirror or get the phone display connected? My primary use would be GPS!
Get the latest version .. it will have even wireless CarPlay and AndroidAuto
I have a 2006 Camry do you know what’s a good head unit I should add to it
You can go for the one we installed .. link in description. Check with the vendor to make sure the compatibility. If you don’t have factory reverse cam, unit in description must work. Pls subscribe and support us . Thanks
What is the brand of the head unit you got from aliexpress? I have a 2005 camry too.
Pls check the video description. Link to the unit is provided there. Pls subscribe and support us . Thanks
Hi where did you purchase your plug and Play wires? I can only find the ones that you have to rewire
It came with the unit
Did you have any difficulty fitting the dash trim back in place at the end of installation? Thanks.
Yes , the total height is more and the trim was not fitting tight .The existing clamp were the new unit is attached to be cut by 5mm on the top to fit it properly.
@@BrissyMallus I'd like to get more details on how you did that, if you don't mind sharing of course. Is there any info online? Or can I PM you somewhere?
How long is the startup time? For example you start your car and then want to reverse straight away, will the backup camera show up on screen straight away or it takes some time for the start up? And how many cores and ram is yours? Thanks
It’s pretty quick . I haven’t seen any issues switching to reverse cam within few seconds of startup .. the one on video has 2Gb 4 core
Does the volume on the steering wheel work
Headunit support this, however the particular model of the car doesn’t have the steering wheel controls.Pls subscribe the channel and support us .
I have 2005 toyota camry LE , can this be fit in my car , also when i use your link it shows me lot of devices , which i need to pick , apart from this do i need to order anything else
Hi, the link shows devices with different configuration like 2 core processor, 4 core etc .. you can select based on your budget . If you have any doubts, you can contact the seller and give the details of your car . They will guide you then . Normally with unit you will get all the connectors . If you have a subwoofer or factory fitted camera, you may need to order the unit with canbus .. if you contact the seller they will tell you about that . Pls subscribe and support us. Thanks
Thanks for this video. I'm trying to install iMars 10.1 android head unit to my Camry 2003, but I can find the clamp/plate that you showed in your video. Do you know where I can buy one from ?
Clamp came with the unit,however it was not a direct fit. Had to drill additional holes . You may buy a thin metal sheet and cut it to suit it . Pls subscribe and support us . Thanks
@@BrissyMallus can you please tell me what holes you had to cut
Pls check the other comments. Have explained it already.
Thanks for the video,
How do you remove the climate control panel?
I tired to pry and all the clips are ditched but it is stuck in its place I can’t take it out.
From memory, we don’t need to take out the climate control panel .. check the video again .
I know that you don’t have to take it out, but I wanna take out the climate control panel to change the lights in it.
The climate control in my camry was quite difficult to take out. my one panel was broken so when i replaced it, i had to remove all the panels underneath eg where the handbreak is located + where the small compartment next to the ciggerate port also had to be removed, after that you can somewhat access the wires behind and remove them (they are literally metal wires that you need to unclip out of the control units if you have the non-digital climate control. After doing that all you can finally gain access to it but will still only be able to replace the outside lights unless you will take the whole control panel apart because some bulbs are hidden behind plastic. Hope that helps!
Thanks for helping each other 😊
@@gamerswins3290 sound like a lot of work 😅
I would rather leave it as is
Thanks for your help
hey bud I can't get the unit to fit was there a special way u got ur unit in I noticed it didn't go in right away but then it was fitted in the next scene ... how did u get it in?
The existing clamp needs to cut a bit . It won’t fit if you use the existing one as is .
@@BrissyMallus the bottom of the existing clamp? that hs to be cut down? and u only use the top bolts ?
You have to cut from the top portion facing you so that the entire unit goes closer to the dash unit .
@Brissy Mallus ok so pls clarify... do I cut the original bracket? there are two mounting points side and top ... do I cut where the bolts go in or do I cut where the unit mounts to the brcket is it OK if I send u an email so u can help circle where to cut pls?
I have subscribed friend..thank u for the content
huottea@gmail.com is my email if u can send me an email I can send one back with a pic of the brcket and u can help show where to cut..is that ok friend?
See the video at 4.29 .. the clamp supplied with the unit should not extend the original one . Basically, the unit overall should go bit inside . I think used only bottom screws . Check the video at 4.29
May I know the exact model that you bought for camry 2005. I surf with link and found several models. Please tell me. Also please let know where I can get your service to fix this in QLD
Models are with different options . It depends on your need and budget to decide which one you should go for .. Feature wise your should select one with 2G 16GB and then may be reverse cam if you want it .. we are not installing it for others ..
@@BrissyMallus Thank you very much for the information
Hi there can I please ask what size is the screen size is pls?
I think it is 7 inch. Pls subscribe and support us . Thanks
This works for the 2003 American version with the guide on the left side
So it won't work for Japanese version Camry?
Can this same exact one fit in a Toyota Camry 2004 ?
If the facio looks similar, it must fit. You can check with the seller to confirm this. Pls subscribe and support us.We will be posting videos on Camry soon . Thanks
@@BrissyMallus is it also Bluetooth ?
Yep .. it had Bluetooth
What about the microphone forhands-free phone?
You can connect that to the unit . There is an option . You have to buy the microphone seperate
What size is this double din?
Length - 200 mm
Height - 100 mm
Will your phone connect to this
Yes , it will connect via Bluetooth/mirroring.. if you want to use CarPlay, you need to opt for the unit that supports CarPlay ( upgrade options for the unit) . Pls subscribe and support us . Thanks
Great idea. Clear instructions. Can you tell me the name and/or link of the unit you got off Amazon. I’d like to put one of these in my 2004 Camry.
Thanks for the comment. Link added to the video description. Make sure the dimensions are correct. Pls subscribe and support us.
Hi Brother,
I want to order the same can you tell what is the brand and model number of this device,
Pls check the video description. Link to the product is given . Pls subscribe and support us . Thanks
I have a 2005 Camry xle v6 will this work if it?
You can directly contact the seller and give them the specifications and they will help you to select the right product. Pls subscribe and support us . Thanks
Hey Mate
Where in Australia and do you do installation . I have exactly the same model of car .
how much was the touch screen you put in?
There are different configuration available. Check the link provided in the description for more details. Pls subscribe and support us . Thanks
Where do I find this?
Link is given in the description area in the video .
What brand is this unit ?
Chinasium
Camry 2003 same as 2005 ?
Check your dash board with the one in the video . If it looks same it is same .