Sealed bearing conversion from balls | bottom bracket installation

Sealed bearing conversion from balls | bottom bracket installation
amzn.to/47icDfZ
crankset removal tool + bottom bracket
amzn.to/471OtXc
Wd 40
amzn.to/3XS3QNY
Multitool
amzn.to/3fi92ce
Replacing a bottom bracket on a bicycle can be a bit challenging, and it requires some specialized tools. Here are the general steps to replace a bottom bracket:
1. *Gather Tools and Materials:*
- New bottom bracket compatible with your bike's frame.
- Bottom bracket tool for your specific bottom bracket type (e.g., Hollowtech II, GXP, square taper).
- Crank puller tool.
- Wrenches and sockets.
- Grease.
- Rags and cleaning supplies.
2. *Remove the Crank Arms:*
- Use the crank puller tool to remove the crank arms from the spindle. Make sure to follow the manufacturer's instructions for your specific crankset.
3. *Remove the Old Bottom Bracket:*
- Use the bottom bracket tool to unscrew the old bottom bracket from the frame. It may be on the non-drive side or both sides, depending on your bike.
4. *Clean the Bottom Bracket Shell:*
- Thoroughly clean the inside of the bottom bracket shell on your bike frame.
5. *Grease the Threads:*
- Apply a small amount of grease to the threads of the new bottom bracket.
6. *Install the New Bottom Bracket:*
- Thread the new bottom bracket into the frame using the bottom bracket tool. Make sure it's snug, but don't over-tighten.
7. *Reinstall the Crank Arms:*
- Attach the crank arms to the spindle, ensuring they are properly aligned.
8. *Check for Play:*
- Spin the cranks and check for any wobbling or play in the bottom bracket. If you feel play, you might need to adjust the tightness.
9. *Adjust as Needed:*
- Fine-tune the tightness of the bottom bracket until there is no play, but it should still spin smoothly.
10. *Test Ride:*
- Take your bike for a test ride to ensure everything is working properly.
If you're not comfortable with these steps or don't have the necessary tools, it's a good idea to have a professional bike mechanic do the replacement to ensure it's done correctly. Replacing a bottom bracket is crucial for your bike's performance, so it's important to get it right.
Also watch.
How to adjust shimano altus rear derrailear
• Shimano Altus Rear Der...
How to adjust shimano tourney tz on mtb
• How To Fix Shimano Tou...
How to install gear on normal cycle
• How To Install Gear In...
How to adjust front gear on mtb
• How To Adjust Front Ge...
#cycling #mtb #repair #maintenance #bikerepair