This fellow's talent for teaching allowed me to cover a LOT of ground in less than 40 minutes. He's both articulate and relevant, guiding me step-by-step in a logical progression. He's found a way to sync what he is saying with what he's doing such that it's like sitting next to him during a demonstration. Well done!
In 2020 you're still No. 1! Thank you for the video you are a natural born teacher, great voice, great explanation and great attitude.Thank you - and yes I subscribed!
Excellent tutorial. I am 92 years old; about 30 years ago, started with program called 4D; then, about 20 years ago, switched to Filemaker; learned how by myself; inclined to purchase this new update.
Today my friend offered me a job and it's mainly in charge of applying FileMaker in the factory. I'm going to the interview tomorrow, this video and your channel helped me a lot.
I built a db in MS access for a friend but they use a Mac, so I had to migrate it to FileMaker Pro, which I'd never used before. 20 minutes after watching your great tutorial, I was confident enough that I knew I could do it. You're a great teacher. Thank you so much.
Since I was searching youtube for Filemaker courses. I have not seen such a detailed and precise explanation. My congratulations!! I look forward to taking private lessons with you.
This is my first time using Filemaker 17 and I enjoyed learning about it from you. Thank you for making it easy to learn. I will continue to learn from you and create my own files.
I have been fiddling with Filemaker for a long time, but this elementary presentation was valuable despite all my experience. What I seem unable to do, however - and this goes beyond the scope of this discussion - is set up a layout or layouts for earnings on the one hand and expenditures on the other, together with the relevant summary files. The result is always a mess, with one related file in an portal cancelling the other and refusing to display on the same layout. I keep two separate files: one earnings and the other expenditures, and, of course that works well with a button so I can leap from expenses to earnings and vice versa. I can't send you my file sketches because I work in Italian, and the point really is that I'll be interested in knowing whether you have addressed yourself to this problem yet and, if so, can you refer me to your presentation. In any case, your videos are well done!
Hey Filya, normally I would refer you to the "portal in 12 minutes" tutorial, but I have a feeling you already went through it. If my interpretation of your word is correct, you are trying to put 2 sets of table in the same page What I would recommend is to look at setting up a relationship with [X]. You can double click in the relationship graph the [ = ] icon between your connected relationship, and change that to [ x ]. That means when you create a portal, it will no longer show related record, but ALL the record within the other table. I can't really guide you through all the way as it does takes a lot of explanation. But try the [x] connection thing and see if it works out for you.
You explain very well Filemarker, I hope you can continue uploading videos and thus help us to continue learning all about Filemarker.saludos from Venezuela.
Thanks so much for this just started using 18 and yet this still applies. There was a portion there when adding photos where you dont need to delete the label since theres an option not to put it in the first place. Really informative.
Fantastic tutorial! Thank you very much! In the version I have, the 'Port Setup' dialog box at minute 36:20 there is no 'New Add-on Table' item... so I had to first create a 'Notes' table and then do this step. It took me quite a while to figure out the problem :)
I ran into precisely this issue too. No "New Add-On Table" option was offered in the "Show Records From" dropdown list of options. Could you explain how you figured it out? 🙂
Thank you so so much for making this! At my job I've been using adobe and excel to make forms and stuff. Adobe is god awful for it imo, or maybe it's just the version work has. Excel is decent at forms, way easier to use than adobe 10 or wtfever. But I discovered this on the server at work and I think this is going to be the program I use to make forms and stuff from now on!
Thank you for providing useful information. These are nice, short and we'll explained. I would really appreciate if you could post a tutorial about working with QR code in FileMaker...
Great Work! Fundamentals are so important. You have a great grasp and convey it well. I like the style where people set up Top 10 most used tools and features of a software package. Just a suggestion for possible future videos. Thanks, again for your efforts!
Very simple and precise way of presenting this software. Could you make a video on differences between FileMaker Pro and FileMaker Pro Advanced. Thanks
I most focus on beginner tutorial so likely I won't be making one for your specified topic. But the general difference between FMPA and FMP is that the advance version contains a number of feature that is more developer focused. For example a debugger to help you run script step by step to check for potential bug; or also the ability to create "custom function". It's more aimed at making developer's life better. But as of FileMaker 17, apparently they combined both of them together, so now technically everyone will be using the advanced version.
This is great! but I have a question if you can tell me What we created this file for, I mean for the company or for something else? Could you explain more details in this comment? Thank you so much.
Thank you for the video! It was great. I was hoping to see the rest of the project. Do you have the remaining steps? I don't see a tutorial anywhere. Thanks! - Never mind. I found it. AWESOME
This fellow's talent for teaching allowed me to cover a LOT of ground in less than 40 minutes. He's both articulate and relevant, guiding me step-by-step in a logical progression. He's found a way to sync what he is saying with what he's doing such that it's like sitting next to him during a demonstration. Well done!
Thanks for the great comment Pat! I am very tempted to pin this for bragging purpose.
OUTSTANDING JOB! Perhaps the best introductory tutorial I've ever seen for any product. Organization and attention to detail are wonderful. Thank You!
In 2020 you're still No. 1! Thank you for the video you are a natural born teacher, great voice, great explanation and great attitude.Thank you - and yes I subscribed!
Thank you Pedro!
@@FMBeginner BTW I sent you an email to learn more about your FM courses.
Take care
Thank you very much, I was contracted for a job involving FileMaker and this has been very helpful.
First Filemaker tutorial video I've watched. Very helpful and well laid out thanks!
Excellent tutorial. I am 92 years old; about 30 years ago, started with program called 4D; then, about 20 years ago, switched to Filemaker; learned how by myself; inclined to purchase this new update.
Great tutorial. Have just started a new job and will need FileMaker, but have never used it before. This really helped. Many thanks.
Today my friend offered me a job and it's mainly in charge of applying FileMaker in the factory. I'm going to the interview tomorrow, this video and your channel helped me a lot.
did you get the job?
@@kbanghart Yes. Have been working for more than a month.
I built a db in MS access for a friend but they use a Mac, so I had to migrate it to FileMaker Pro, which I'd never used before.
20 minutes after watching your great tutorial, I was confident enough that I knew I could do it.
You're a great teacher. Thank you so much.
Well, that’s also because Access sucks whereas FileMaker is a rapid development environment that’s fun to use.
Just beginning to create a database for our business and this was very helpful, thanks!
Since I was searching youtube for Filemaker courses. I have not seen such a detailed and precise explanation. My congratulations!!
I look forward to taking private lessons with you.
Your technique to simplify a concept is just genius. Amazing, commendable, the best, keep it up
I learn more from you in the shortest time than any other tutorial thanks and keep posting.
You have a very nice personality, and did a great job teaching the basics of FileMaker! Thank you so much!!
As we would say here in Italy: you are "grandissimo"! You advised me to join layout and self-connected portals with "X" and it worked! Many thanks.
prego amico!
This is my first time using Filemaker 17 and I enjoyed learning about it from you. Thank you for making it easy to learn. I will continue to learn from you and create my own files.
I have been fiddling with Filemaker for a long time, but this elementary presentation was valuable despite all my experience. What I seem unable to do, however - and this goes beyond the scope of this discussion - is set up a layout or layouts for earnings on the one hand and expenditures on the other, together with the relevant summary files. The result is always a mess, with one related file in an portal cancelling the other and refusing to display on the same layout. I keep two separate files: one earnings and the other expenditures, and, of course that works well with a button so I can leap from expenses to earnings and vice versa. I can't send you my file sketches because I work in Italian, and the point really is that I'll be interested in knowing whether you have addressed yourself to this problem yet and, if so, can you refer me to your presentation. In any case, your videos are well done!
Hey Filya, normally I would refer you to the "portal in 12 minutes" tutorial, but I have a feeling you already went through it. If my interpretation of your word is correct, you are trying to put 2 sets of table in the same page
What I would recommend is to look at setting up a relationship with [X].
You can double click in the relationship graph the [ = ] icon between your connected relationship, and change that to [ x ].
That means when you create a portal, it will no longer show related record, but ALL the record within the other table.
I can't really guide you through all the way as it does takes a lot of explanation. But try the [x] connection thing and see if it works out for you.
Check this page out, it got some useful information about the X relationship.
www.filemaker.com/help/12/fmp/html/relational.11.8.html
@@FMBeginner In fact, that worked beautifully. Now, expenses and earnings can viewed together.
You explain very well Filemarker, I hope you can continue uploading videos and thus help us to continue learning all about Filemarker.saludos from Venezuela.
Thank you Sunny, very useful. This is my first look at FileMaker and you put it across very well
Hi Sunny, it’s 2022 and I’m finding your 4 part basic tutorials are the best I’ve used. Thank you
Thanks so much for this just started using 18 and yet this still applies. There was a portion there when adding photos where you dont need to delete the label since theres an option not to put it in the first place. Really informative.
Thank you Paulo!
excellent tutorial, just purchased Filemaker and you got me started already...thanks!
Hello all, the videos are very well explained and helpful. Please more videos
Fantastic tutorial! Thank you very much!
In the version I have, the 'Port Setup' dialog box at minute 36:20 there is no 'New Add-on Table' item... so I had to first create a 'Notes' table and then do this step. It took me quite a while to figure out the problem :)
I ran into precisely this issue too. No "New Add-On Table" option was offered in the "Show Records From" dropdown list of options. Could you explain how you figured it out? 🙂
I find your teaching style very clear and easy to understand. Well done, and thanks.
Life saver! So helpful for a total beginner! Than yo so much
2020 helps me by putting you in my recommendation list!!!! Thanks man.
The best tutorial I've found so far.
Good job!
AWESOME! Thanks for posting these. I am an occasional user and this really helps refresh plus learn many nuances I didn't catch during training.
I have seen a lot of FM Videos. Yours are by far my favorite. Are you no longer making them?
Very good presentation of FM. Will be back.
Thank you!
Very useful tutorial.
thanks! you are a good teacher!
AMAZING tutorial. Thank you
Very useful tutorial that I have been looking for quick learning since a new job requires me to perform this skill
Thanks An glad its useful to you!
Very very Helpfull , Thankyou a bundle
Excellent Tutorial!
Really simiple and clear. Thanks for taking the time to produce this.
I appreciate your generous teaching.
Awesome video with excellent info for beginner! Subscribed and look forward to see more videos from you.
I just saw this and definitely subscribed because your instruction method is so intuitive. Thank you for being an excellent instructor.
Awesome! Thank you!!
such a legend! keep up the good work
This is the best tutorial for me.
Congratulations on what is a very good instructional video.
Great video. Had forgotten a lot of this, reminded me so can make new apps or modify my old apps.
Thank you so so much for making this! At my job I've been using adobe and excel to make forms and stuff. Adobe is god awful for it imo, or maybe it's just the version work has. Excel is decent at forms, way easier to use than adobe 10 or wtfever. But I discovered this on the server at work and I think this is going to be the program I use to make forms and stuff from now on!
Great refresher!
Its very good
thanks so much god job ....continue
Thank you very much for the tutorial on FileMaker, it was great!
OUTSTANDING!!!
You're really, really good at this! Thank you!
thanks for the easy steps. 2 thumbs up @ 2021
thank you very much for this tutorial. it helps me a lot
Good Job. Content is helpful.
Thanks buddy, very helpful
Thanks, man, This helped a lot with understanding Filemaker.
Great Job!
Very helpful, Thanks for all the hard work
Well presented and easy to understand. This tutorial was great for starters. Thank you.
Great tutorial! Thanks for breaking it down.
Bravo, molto utile
Hi,
thank you for your work!
Go your path!
Sincerely Kai
Great tutorial, and thanks for all your effort to spread knowledge about Filemaker (TM)
Thank you for providing useful information. These are nice, short and we'll explained. I would really appreciate if you could post a tutorial about working with QR code in FileMaker...
Thank you very much for the great introduction, it helped me a lot
Great video.
So helpful! Thank you so much for making this!
Thank you so much! Excellent Job! It really helped me get started and made me interested. Subscribed!
THANKS WEELL EXPLAINED AND VERY HELPFUL
thank you for this informative and well organized video!! extremely helpful!
Best tutorial for filemaker thumbsup my friend.
Great Work! Fundamentals are so important. You have a great grasp and convey it well. I like the style where people set up Top 10 most used tools and features of a software package. Just a suggestion for possible future videos. Thanks, again for your efforts!
Thanks for his excellent informative video! It really helped me getting started. Have subscribed!
Excellent tutorial! I´m learnig with them..
Great tutorial!
Very simple and precise way of presenting this software. Could you make a video on differences between FileMaker Pro and FileMaker Pro Advanced. Thanks
I most focus on beginner tutorial so likely I won't be making one for your specified topic.
But the general difference between FMPA and FMP is that the advance version contains a number of feature that is more developer focused.
For example a debugger to help you run script step by step to check for potential bug; or also the ability to create "custom function".
It's more aimed at making developer's life better. But as of FileMaker 17, apparently they combined both of them together, so now technically everyone will be using the advanced version.
Subscribed. Amazing teaching skills!
Thank you Carolina!
very clear in explaining concept
Thank you
Ty for your teaching Sunny
really love this video. well prepared tutorial. very helpful.
keep going.. very informative! i wish you all success.
That was super helpful, thanks a lot!!
Thanks a lot it's been super helpfull!
This is awesome ... loved it
Thank you very much, you're genuinely awesome.
Thanks for the compliment Antoine!
Excellent tutorial
Thank you so much! That was very helpful ^-^
This is great! but I have a question if you can tell me What we created this file for, I mean for the company or for something else? Could you explain more details in this comment? Thank you so much.
Thank you! Very helpful
thanks a lot
Very useful explanation. Congrats
Thank you very very much for this!!! :)
Excellent tutorial keep going
Super job!
Thank you for the video! It was great. I was hoping to see the rest of the project. Do you have the remaining steps? I don't see a tutorial anywhere. Thanks! - Never mind. I found it. AWESOME
Thank you for this, super helpful!!
Thanks Friend 🙂 ... you did great job... keep it up and top🙃