Fix Windows Failed to Start Windows 10/11, How Fix UEFI Partition Using CMD
HTML-код
- Опубликовано: 1 авг 2024
- Fix Windows Failed to Start Windows 10/11, How Fix UEFI Partition Using CMD
How do you fix the boot configuration data store could not be opened?
How to Fix the requested system device cannot be found
Are you encountering boot configuration errors like "The boot configuration data store could not be opened" or "The requested system device cannot be found"? Don't worry, In this tutorial, we'll walk you through step-by-step solutions to resolve these frustrating issues and get your Windows system up and running smoothly again.
🟢Prerequisites:
Windows installation media - • How To Create an Origi...
🕐 Timestamps:
0:00 - Introduction on Fix Boot Configuration Data
0:34 - Understanding Boot Configuration Data and Requested System Device Cannot Be Found Errors
0:55 - What Causes Boot Configuration Data Errors and System Device Issues
1:32 - Boot from Windows Recovery media or Windows installation media
1:53 - Entering Windows Recovery Environment
2:03 - Step-by-step walkthrough to fix the UEFI partition using CMD
2:33 - Tips to create a EFI partition and prevent boot errors
5:51 - Recreating the boot configuration data
6:13 - Verifying successful restoration
🛠️ Steps covered in this video:
How Do I Fix Boot Configuration Data is Missing?
How do I fix Windows 10 UEFI bootloader?
How to repair UEFI partition?
fix uefi boot windows 10 command prompt
windows 10 uefi boot not working
----------------------------------------------------------------------------------------------------------
Of course, let us know your opinion.
Please Like, Comment we need your support.
And guys please don't forget to Subscribe our channel ASA Technical
Thank you.
#FixWindowsFailedToStart #UEFIPartitionRepair #WindowsBootError #asatechnical #CMDTutorial Наука
Thanks, you saved me a ton of work, I thought that formatting was the only solution at this point. ❤
Glad I could help
I did exactly the same steps and still not recognizing the newly created partition. Everything seems to be there but the legacy boot doesn't recognize the boot partition/volume. What can it be?
Thanks. But i have a question in the diskpart after selecting the disk 0, can we list the partition and yes the efi files may be corrupted but i think partition may still exist, then delete the partition, create partition efi, format the partition in fat32 file system and assign letter and then exit diskpart and then boot loading command. Is it possible?
Thank You My Brother
THANK YOU
Thanks so much it worked for me! At the end, I had to remove the old boot partition with diskpart.
Glad it helped
Man, Your Legend 🙂, Thank you very much, I don't have words to thank you, 🙏🙏🙏🙏
Happy to help, have a good day
Thanks 👍. These steps worked for me
Glad it helped
How do i have installation media if my laptop is not even starting?
ifollowed but there is onlu USB recognized in diskpart, my c and d drive all disappeared
Thanks again!
Thanks very much for your support, your support will help us to make more advanced tutorials!
Thanks sir.. you save my day.. 🎉❤
Happy to help
you saved my day
thanks❤
Glad I could help, have a good day
Thank you so much i was come from video to another video to another video to your video and you are fix that thank you
Glad I could help
Atill facing the same issue select and reboot proper boot device😢😢.
This boot problem came after changing my partition from mbr to guid by diskgenus software.
After that my pc doesn't boot
When i type shrink desired=300
It brings an error
"Virtual Disk Service error:
The volume you have selected to shrink May be corrupted. Use chkdsk to fix the corruption problem, and then try to shrink the volume again."
Just follow the on screen instructions, and disk corruption related tutorial is available in our channel.
Bro when I do the diskpart cmd no disk shows up
This actually worked for me. Thank you!! Saved me after a day of banging my head against the wall. I guess now I have to leave the 300mb partition? Or is it safe to delete it? I'm afraid to touch it after what I've been through this week.
Glad it helped, It is 100% safe if done properly.
@@asatechnicali entered everything as you showed but when I rebooted my windows c drive became raw. I had successfully created generic bcd boot files and partition. Somehow this is not working. Anyways I ran chkdsk to fix disk and it made my c drive available again but this is now getting hectic. Nothing I tried seems to be working so I am cloning my hard to another drive but now that process is stuck too it seems. It seems it’s not even getting copied to another hard drive
thanks, you save me 🥰🥰
Glad it helped!
Your are a fucking legend bro❤.......this was something new i learned besides sfc , chkdsk bcd edit etc❤❤❤🎉🎉🎉hats off man , i am subscribing u and saving ur video as well
I followed everything ans it was all working right, exactly like how it is in the video, but when I exited out of the Command promopt the "Continue" button didnt show up. It still just said "troubleshoot" and "Turn off computer" 😭
Turn off your computer, wait for few minutes and then turn your PC back on!
I have a AMD processor!! Will it’s still work??
Yes of course
BFSVC Error: Could not open the BCD template store. Status = [c000000f]
Did you select the right directory?
Be sure to type \ not / . Works for me.