the great wall of copper ( massive copper melt ) asmr
HTML-код
- Опубликовано: 5 мар 2022
- Hi everyone in this video I’ll be melting down some copper for a friend well a lot of copper
Hope you enjoy the video
If you did enjoy the video please check out my other videos link below
/ @meltingipswich
Don’t forget to subscribe
![KFF Singapore Badminton Open 2024 | Alfian/Ardianto (INA) [7] vs. Liang/Wang (CHN) | QF](http://i.ytimg.com/vi/g0QGafkoT2o/mqdefault.jpg)
![DRAGON BALL: Sparking! ZERO - Fused Warriors Trailer [BUDOKAI TENKAICHI Series]](http://i.ytimg.com/vi/84p4Lvyfyes/mqdefault.jpg)
That was soooo satisfying to watch. And that’s a great stack of bars, I’m jealous haha. The way the pours just flow like glowing water is so good to watch and see. Loved it!
Thank you 🙏
Great melt and pour video. Thanks for sharing..
nice copper wall!!!!🙂 Thanks for the video.....
That my friend was a great video. Watched till the end. Awesomeness
Awesome thank you it’s always good to have a fantastic comment thank you 😊
Now that is a beautiful wall of copper. My jealous lol Gret job. Love the video. Thank you for sharing.
Thank you. Im hope to get the whole lot Finished next week.
Thank you for watching 👍
@@meltingipswich We can't wait to watch
Best copper pour I've ever seen! I don't know what it is about copper that makes me drool but, I love it!
🤣😂🤣😂 thank you. I really enjoyed pouring them 👍
i agree an same wit me 😅 i think of it as gold for some reason lol
I always love watching copper getting melted, adds a nice green to the flame :)
I no it’s soo nice watching it 👍
A stack of copper is good.
A Bigstack is really good.
The great copper wall of Ipswich is outstanding.
The super copper house is a phenomenal project.
Love the video and the copper wall is wow, great work.
🤣😂🤣 imagine a house made of copper 🤤
Great video thats some melt and great amount copper loving the wall different
Thank you 🙏
Great video and melt. Very nice wall of copper
Thank you 🙏
Nice work. It’s like a adult movie but with copper! 🥰
😂🤣😂
Lol 😂
Good job. Nice and clean ..Pleased to see that!
Thank you 👍
That felt good to watch. Love Copper when it's clean. Just Amazing how much work really goes into this kind of project.
Thank you for sharing this. Makes me want to fire up the Kiln and get to it again. Just wish it was warmer...lol
Thank you. It is slowly getting warmer 😂👍
Great Melt!! 👍😁
Great pouring and the result is great. I like it 🙋😎
Thank you I have a new video tomorrow
Man!, what a great haul, enough to make anyone feel rich! 💲
💵 😂🤣
Am impressed, thank you for a nice educative vedio
Thank you for watching. I always post my fails aswell as the successes because others can learn aswell as I do 👍
Nice 👍
Thank you
Nice job on the bars great vid keep it up
Thank you 🙏
That was a nice melt, nothing better than melting and pouring Copper. I was hoping that you would get that brick turned to be able to pour them all in a row like that. Can't wait to see all the bins melted and lined up. You should also build a small house outta the bars lol
🤣😂🤣 that would be good.
I’m hoping next week will be the last of it. It will be a long old melt
Thanks for watching 👍
Nice pouring sir, I love melting copper like you and stacking it.
I have 67 kgs atm, it’s not much but every now and then I trade 35-40 kgs for 10 Oz of Silver😉
I get mine from street scrapping mainly but also market place, it’s a good way to get free or small cost copper and it’s very satisfying pouring your own bars😉
Well done.👍
I love copper it’s a beautiful metal and yeah it’s enjoyable to melt and pour
Thank you for watching 👍
Love what you're doing man, keep up the great work!
much appreciated. I love doing what I do aswell, thank you 👍
Fantastic! 👏🏻👏🏻
Thank you
Another awesome copper bar pour thanks for sharing
Thank you for watching
@@meltingipswich you're welcome
بسیار عالی بود
Now that’s a Melt and pour 👍🏻
Thank you
Great stuff, you can make even more and do a floor in a room with this much material, cheers
🤣😂🤣
That fire looks green
Yeah copper gives off a green flame it’s beautiful ain’t it
That's a lot of copper. Cool video again. At least is didn't rain this time. Can't wait to see the total weight when you are done.
Yeah I’m hoping it will all be melted next week👍 thank you for watching
If you flatten five or six inch segments and stand them vertical in your crucible your volumetric efficiency will increase and your fuel bills will decrease.
after watching this i have to make a few copper ingots just to get the urge out of my system
🤣😂🤣
Oh, how fast to melt 22 pounds of copper.
ok❤
Eline emeğine sağlık.turkiyeden selamlar
I love watching this kind of video, definitly subscribe
Thank you 👍
Super video and sack
Thank you
Damn what a stack!
Very jelous since all my copper and brass is still in buckets in its scrap form, soon I'll get my devil forge aswell and I'll have around 300kg to go through, that's goint to make for some very interesting weekends and one happy wife (at this point he is screaming to see those buckets GONE lol).
Btw if you are planning on more melts thise size you should get a few more of those molds, being able to almost completely exhaust the copper in the crucible in one go would really speed up the whole process.
You probably will want a little left over to speed up the subsequent melts tho.
Yeah you should always keep a little bit in the crucible if you are continuing melting as it speed up the process rather than starting Fred’s every time. But yes I agree I do need to get some more.
@@meltingipswich Those moulds are 1kg ones or are they rated for more than that?
I know they usually consider gold weight for the mould rating and since I am gonna get me some when I get the forge I'd love to know, I kinda fancy those small ingots compared to bigger ones 🙂
@@MrSwosh89 I think I brought them as 65 ounce moulds but yeah they hold around 1kg of copper
Loved the video! Very satisfying.
Do you have an idea of how much it would cost in gas to melt this amount?
I’m not really sure as I don’t pay for gas I do some melting for my gas man as and when and he give me gas as and when
You can fit more if you flatten the. Copper ?
this is a disgusting amount of copper. . I am jealous.
😂🤣😂
Thanks for sharing
I throughly enjoy the copper melts you show. I too have a foundry and have been melting a lot of aluminum. I also have quite a bit of copper to melt but after 10 - 15 minutes or so at 1.2 pressure it starts dropping and I loose the heat enough to melt the copper. How do you melt so much copper like this. My tank might be getting too cold. What’s your advice?
Thanks so much. Keep the videos rolling!
First of all thank you for watching.
When the heat starts to dip I put the gas bottle in a bucket of water it brings the pressure back up. I use the big blue buckets in my video then if it dips again it either mean that there’s not enough gas in the bottom to give you the pressure you need or change the water again ( don’t use hot water )
Thank you
@@meltingipswich I’ve been enjoying your videos for a while. Just love them.
Thanks for the tip. I’ll give that a try. So just use room temp water or warm water? Does it matter?
Thanks again for responding. Have a great day!
@@timwerner7769 I used water straight out of the tap
This may have been asked before, but how much copper can be mted per tank of fuel and what is the offset cost (assuming what anyone does is considered average knowing there are different methods and thickness and on and on).
Hi there as I don’t pay for my gas I’ve never really paid attention to that but I’m sure I could keep a record of it when I start a new bottle.
Thank you for watching 👍
Plus
Who really cares what it costs!🥰
@@chrisk6822 true. It’s all good fun 🤩
@Chris Kempf It's not really anything more than a couple of questions. For the sake of curiosity and because my OCD is screaming the need to know.
Besides, seeing it in its liquefied state of the deep glowing red is pretty entrancing. You can see where parts are cooling faster than other parts of the molten metal, which gives it an unnaturally eerie yet calming sensation. Like most people feel about staring into a fire.
@@wikkedspindl yes it’s very mesmerising 👍
First like and comment have a great week everyone
Thank you
WOW!!
I have manufacture company and i melt copper average 300.000 but problem is in the process....the melting process is about 25 years back the finish product is sheet and circle and its outcome is worst full of dust in the sheet and circle and chemical to remove the dust of the sheet and circle....
You are ricc menn
😂😆😂
How much propane did it take to do that? I’m trying to figure out if melting it into bars is worth it or not.
Hi ya I can’t actually remember now but I think I use around 19kg of propane
With propane at $4.00 a gallon? How many gallons per melt? How many pounds per melt.
Hi there I’m in the uk and I don’t pay for the gas it’s free for me
@@meltingipswich I wish I had access to free gas, Then I would melt the like 900 US pounds I have here.. It just cost too much. I'm thinking a lot of solar panels and melt them with electricity.
@@troyb.4101 😂😂😂 alway worth a try
The Ipswich Horror, another 1000kg and you can retire.
😂😂 I wish
Does melting it to ingots get more scrap money?
It makes it the best price for copper but it’s mainly to stock it and keep it for a rainy day as it take up a lot less space
@@meltingipswich thanks and besides looks cool, right. Thanks.
Flatten the copper so you fit more in at a time...
I could but it then take longer to melt. Doing it this way I get a puddle at the bottom very fast and I can then feed more in and it melts faster
How much gas did it take to cast all the copper in making this video and thanks in advance
Hi there. To melt all this copper with other 2 videos as well it’s was around 2 19kg bottles of gas
Thank you 👍
@@meltingipswich thank you
Where could you actually sell your bars, scrappies won't take them surely? How can they verify its solid copper?
My yard will take mine they have taken a couple and tested them for purity as I wanted a price and it come back at 98% pure and they will only pay normal scrap rates so I still haven’t actually sold them any yet
@@meltingipswich yeah I did wonder, I watch another channel and he has almost 1000kg worth of various metals and I think it’s worth nothing if no one wants it 🙉
@@GaryNewsom1 yah maybe! but it don’t cost me anything so anything I get is a bonus I am actually going to list all of my stack on eBay after Christmas and start fresh that way if any of my subscribers wanted any of them then they are accessible to them 👍
@@meltingipswich cool idea I got a back garden full of copper not sure my girlfriend wants more 👌
@@GaryNewsom1 😂😂😂
Can you make rod I may need some for water welder nozzle.
I could but I don’t really get involved in marking things for people other than ingots because I’m just a hobbyist and don’t want to disappoint
every melt is a result buddy
Ipswich QLD?
Think i must melt some more aluminium today 🤔
🤣😂 why not
@@meltingipswich and so i did hehe
Why not buy a camera stand?
I do use a camera stand
Респект💪👍👍👍
Thank you