01:57 ("1 Pump = 4 Polluted Water / min ...") is misprint. Correct: "4 Polluted Water / 5 mins" 😐 But the calculations are still correct, cos it's still 4 * (60 / 5) = 48 PW / hour. Also you CAN'T place ceiling over the tanks like that anymore, but you still can place purifiers directly on the top of the tanks, and you will have the same result.
Do you know if they have fixed or improved it so that you don’t need to go to your barrel manually? Also when you do purifications do the beasts ever damage the pumps or can they only damage structures per se (floor, walls, etc) but not devices?
I can do around 1290 per day. I have 16 pumps and 5 barrels. I cut off 10 pumps when I'm in my barrel acid phase. That allows polluted acid to keep pumping and keeps the barrels active constantly. I also cut on 2 water osmosis units to keep the barrels fed with clean water. I have to go down and pull water from a dirty water source. It's nice because I have the luxury to cut on and off the pump when necessary. Nice build, btw. :)
The problem with farming this acid is that when you are offline, three-quarters of it will be filled with pure water even though all four spots are full of polluted water. It only works properly when you're online.
That is the best setup I’ve seen yet. Thanks for your dedication. I will copy this for sure, just not that many pumps as I only have 4 gens going at the time.
amazing guide. love your compact and efficient setup! didn't know we can stack water pump this way my base is 95% on water so compact setup is really useful to me.
@@notoriouspc he has said in other videos his spoken English is not that good, so I find the video even more valuable knowing he goes through all of that to share all this great info
It took me a while to get done, but I have it done like yours is. I can confirm that I have about 32 watts remaining by using 7 deviant generators and 7 eels. I have Generator: Electrical Expert which allows for a 7th generator, and provides an additional 2W from each source I wrote this about 20 minutes after I finished, so I don't have a production count yet.
I wondered how this was to be powered. I believe I have Genny expert unused cause i didn't understand the tooltip. Server shutdown night so have to check in morning found a "foolproof" way to get eels so... Right now I am only using four pumps on two gens. Thx this helps.
5 min viedo with only information instead of 30 min wanabee youtubers crap talk,sponspors and etc!!! THANK you, easy to understand and without that gibberish streaming shit ;)
Real nice job ! im doing some adaptations to get rid of that small water pump, just for the chalenge, but somehow positioning the big water pumps is a real nightmare, how did you do it so easy?
hey, new building guide will be released today. In the upgraded build it will be much easier. 1) place 1st layer of pumps, using grid snap 2) disable grid snap 3) use ALT + mouse wheel to raise pump up a bit 4) enable grid snap again For the rest layers correct height should be applied automatically.
@@KIANL-GAMER Try bumping up the end pieces one step (raise them one over the floor) and you can place it just fine. micro adjustments to the rest are easy from there
Nice Vod! The hardest part for me, hands down, is to make all the pumps to be so symmetrically aligned! I just cant do that! Each one of them always ends up placed a bit off for one side or to another side...or a bit too high...or a bit too low! Its a visual mess! LOL
this was patched. but you still can place water purifier directly on the top of the tanks. will be same result also, updated factory will be released soon.
@@KIANL-GAMER ah i see i just added another small wall on top of the half walls so they fit to fix it. Still the game is buggy and when you leave the farm un rendered the osmosis produces purified water instead of the impure acid i hope they fix this
Hey great explanation and build! Are you planning to have an updated build for this? The roof doesnt attached on top of the water tank due to clipping on the new update.
its insane to me to see that people still complain even tho this is a full afk farm.. be happy that you dont have to farm actively like in any other game people but i guess casuals be casuals
My pumps are in a polluted area, and they're far away from any water bodies and are placed on a solid ground. Not sure if it's a bug, but whenever I'm offline my reverse osmosis filters which are supposed to turn the polluted waters into impure acids somehow turned everything into pure water.
@@TGO1688 they're at the absolute highest, they're literally floating above the ground. I had a chat with someone in the official discord, it's actually a known bug, it seems I'm not the only one with the issue.
the problem with all this min maxing is that. You don't get oil and water. Two very essential things as well. For beginners those are way more important that doing something like this. Even if you're in a stardust area that has oil you still need purified water to brew the impure acids into acids. Relying on rain catchment is highly suspect as it doesn't work properly in some areas and only when it rains.
Thanks the build! How are you getting the impure acid only into one water tank and the purified water only into the other water tank? I've re-watched this video about a dozen times and i can't figure it out!
you need to keep wall-mounted pump enabled. otherwise, impure acid will go from water purifier to the tanks below them, cos pipes will work in the opposite direction. updated build will appear soon
Is impure acid meant to go water into the dirty water tanks underneath the purifiers? Cause only a few of them actually go into the tank on the other side. Most of them go back down. Is there a fix for that?
i wish theyd reduce the cost of pump farms or make a meme spec for it dedicating this much Ws is crazy. legit the only farm that cost this much, fuel farming is wayyyyy cheaper and just a lucritive. im glad i got sulfur chem spec hated running the farm.
Honestly not even sure what you would need that much acid for not to mention the fact that you're basically used all your power on acid and water generation and have none left over for your furnace stove refrigerator deviations that need power
Am thinking replacing the pumps with rain collectors since after the patch it now gives you polluted water too. How many of those collectors would be enough in this case?
Not sure if I'm doing something wrong but my barrels produce 1 acid/20 mins * 4 barrels * (60/20) = 12 acid per hour not 48. Am I doing something wrong or do you need to have so much surplus impure acid you can fill all 4 material slots?
@@KIANL-GAMER how much impure acid does that require I just tried splitting 600 into the 4 slots of the brewing barrel and it just combined them all into one slot
did water pumps get nerfed? i tested the pumps in polluted water and in polluted land. it does not matter where the pump is located, in both cases the pumps only pulled 24 polluted water per hour (alternating every 5 min polluted water and dirty water, so every 10 minutes polluted water).
@@KIANL-GAMER You're still able to do it. It's just very tedious. I had did it but didn't have it the way I wanted it to, so I just put it directly on top.
Thanks for all your videos man, great way to deliver the info needed, I did notice something that I don't see a lot of people mentioning, in my setup last season I was collecting polluted water through my rain collectors 80% of the time, this season only about 30 polluted water per rain collector (something has changed by the devs maybe) I wonder if you know anything about that or if you can research that further, that would be pretty cool to find out 100% how it works better as you know because you want need to use as much power or as many pumps, also before somebody asks; no, it doesn't really rain but I still see the collector collecting polluted water. 😶
this is already overexplained. its simple. 10 pumps will supply 1 osmosis filter which can supply 2 fermentation barrels. build on land in a polluted zone. double that, thats how you get around 1000+ acid a day.
Beautiful video! But I have a question where do I plug the power generator into? I made 6 deviation energy generator and wired them all together but now where do I wire it into for the farm to work
they patched this, so u can't anymore. but you still can place purifiers directly on the top of the tanks, and you will have the same result. an updated build will appear soon.
You're spot on. With the food that drops 50% more acid, boosted with fruit tea, chef rex and the gourmet kitchen specialisation I get about 7-8 acid drops per mob. Doing a silo with deviations is far more time effective as you're also getting other materials and stardust source and gold mods if you use a controller. It doesn't hurt to have a passive income but I find 4 pumps running to 2 single purifiers which then feed into 5 barrels gets me around an extra 200 a day. With plenty of power left for the rest of a base full of sprinklers lights and oil refineries etc Obviously other people will enjoy the game differently and that's ok too
@@CommandoJenkins you do know it's not hard to have switch to power which area you want with breaker :P this is a good passive acid farm Combine it ACTIVE acid farm to double the amount you get for less amount of time over time :P
where is this base location? i have problems in polluted areas to get actual purified water, but this factory is working like a charm. only issue is i should maybe put 5 barrels cuz i dont hit 1000 acid/day only about 800
If you are wondering why your acid farm is producing purified water instead of impure acid when you log off, it's because the there's a bug currently that confuses two types of pumps, if you have them. if you have water pumps in TWO areas, one pumping acid and another pumping dirty water (most likely an isolated pump for sprinklers - farming) the game will get confused and all your polluted water pumps will produce water instead of acid, whereas your dirty water pumps will produce impure acid instead of water. when you log on the confusion is undone. so one way to solve this problem is farm a lot of water first, then delete the irrigation pump for sprinklers. then there will be no more 4000 water waiting for you when you log on.
Weird I’m currently farming oil and water with 1 pump for water and 4 pumps for oil and I always get oil and water properly. I guess this is an issue with impure water specifically, not oil.
Additional note. You can’t actually make 4 acid per barrel slot unless you have over 3010 weak acids to put into it. The barrels do not let you fill each weak slot individually only the first till 1001, then second slot for another 1000 and so on. Is why production may not be as straight forward if there is any hiccups with the purified water or power, as it always prioritizes putting the first weak acid slot till 1000 units are in, then second slot and so on.
what i did when i started my farm is fill only one slot on 3 barrels then drop all the leftovers into the last barrels till i filled the 4 slots then do that with 2nd barrel and so on and now im at 4 barrels with 4 filled slots and added a 5th one that's still at 1 slot.
how did you place 21 pumps? I seem to be at my build limit after placing the initial 20 in the factory. Are there other items that contribute to the max number of pumps you can have bc I have a little farm as well and am wondering if removing that would free up more pumps. I’m so confused 😢 Subbed and am excited for the future vids!
Hey. You have facility limit 250 items (at the top of the building interface). You have probably reached it. Pumps are facilities, same like turrets, switchers, terminals and other stuff.
@@KIANL-GAMER Nope that's not it, I'm at 207/250 and I am still getting the Space is full message. I'm well under the limit for all items except Power Generator which is 7/6.
I figured it out, I had some leftover barrels from my previous farm and those appear to contribute to the max Water Pump limit. After removing a barrel, I was able to place another pump.
I am having a very hard time trying to align all the pump in one single vertical line. Took me hours to finally got it right. Alt+mouse wheel is very sensitive and I ended up having a huge gap vertically in between the pumps. Any tips on that? Saving the setup in blueprint is not saving all the pumps. As I can’t build any pump once I extended the base tile, I ended up rebuild the whole thing from scratch every time I moved my base.
Yes, this is the problem with pumps - they always delete after u change base location and cannot be saved in a blueprint. Tip - make a "shelves" for them, if u can't align them normally. First layer on a ground for example, then and half-block and ceiling, and place the next layer on this ceiling.
How do you power all this stuff? I only can have 5 generators and only have the small solar panels for now, but the most I see is 35 watts per generator which isn't even enough for that amount of pumps.
Your pumps should bee placed far from bodies of water, then they will only produce polluted water - that's first. Second - you need to fill all 4 slots of both water purifiers with polluted water (means u need accumulated 800 units of it). After this they will start work at full power. P.S. Updated guide is coming soon.
very nice guide ty very much ... I'm having a problem where my pumps still getting sea water with polluted water even though i took them as far as i could inland away from the sea ... how to fix that ? should I move my whole base away from the beach ?
@@KIANL-GAMER I finally could figure it out why ... in fly build mode i could glitch under the ground to find out there is sea water below the surface :((
i have a question i puted my pumps on the land in a poluted area near the sea and they still pumping sea water , i want them to pump only poluted to make acid , like you said in the video , if u put them on the land u get only poluted water , any idea what is wrong ? does that still work or ?
my acid farm doesn't work when i'm not playing, btw with 10 water pumps, 3 osmosis converter , 3 tanks and 6 barrels, it only produces like 2-300 acid per day (600 impure acid - 40 acid) . Eating the Deviated Chops stuff and going to blackfeel city killing mobs for like 20 minutes grants me around 700 acid . they need to fix the barrels ratio and speed. also, why should a barrel require electrical power and why 10W ?!?
they patched this. you can't place ceiling over the tanks like that anymore, but you still can place purifiers directly on the top of the tanks, and you will have the same result.
@@KIANL-GAMER thanks! i appreciate your work . looking forward to it. tried this build and its working just fine. my problem is when i move the base water pumps gets destroyed. nonetheless this is superb thank you!
It would be more helpful if someone calculated how much water 1 Rainwater collector can collect on average per day in Red Sand or the 6th zone, on average. So we could maybe rely on Rainwater collectors instead. Hell, TBH it's prolly more simple to just do a semi-AFK dirty water farm, you can collect up 10K in one go, no idea how much time it takes, but I suspect under 20m.
Thks. Being looking for this kind produce with formula coz I always extract too much or too slow. Need a balance. Hope can do a petrol one. But why is my wall mounted pump is 10W? Or I remember incorrectly?
The script you wrote is excellent - straightforward and valuable. I understand why you might use AI to generate the voiceover, but the delivery makes it a little hard to follow. Just some constructive criticism; thanks for the info!
Hey mate, i've been losing ym brain over my setup. Have 27 pumps (overkill i know but just trying to fill slots D:) even spread into 3 storage crates, all going into 1 wall pump to the 2 osmos. Have made sure all pumps run 24/7 and i still never see the slots full. Any idea what i'm doing wrong? Great guides otherwise!
@@KIANL-GAMER Nah figured it out i'm a fool, i'm in blackfell oil/pollu and not sure if it was changed recently but i thought oil was every 10 but pollu was still every 5 mins, but they alternate. so need twice the pumps for oil/pollu zones
Im running 100% Polluted Water on my Osmosis water purifiers but sometimes, besides the impure acid it also appears pure water on the osmosis purifier output is this correct?
@@KIANL-GAMERI’ve checked all my pumps no dirty water, also all my 3 tanks are maxed with polluted water, and the 8 slots on the osmosis are filled with polluted that’s why I find it very strange 😮
@@KIANL-GAMER Found the issue, its a bug, alot of people having it, when offline the Osmosis created Pure Water from Polluted Water. i tested by disconnecting everything and filled all Osmosis by hand with Polluted Water and went offline when i cant back the Osmosis outputs had both Pure Water and Impure Acid and the inputs where still Polluted water :( If i stay logged in the output is 100% impure acid.
The developers have said that they are going to make it so impure acid can be moved automatically. I do not know it they have done it yet as of posting this message.
great video but maybe my math aint mathing i have the 4 brew barrels but my math is only giving me 32 acid an hour maybe i did something wrong or im not counting for the 10 mins extra that carries over into the next hour
Hey. Each barrel has 4 slots and produces 4 acid once per 20 minutes, meaning 3 times per hour. 3 iterations x 4 slots = 12 Acid / hour x 4 barrels = 48 Acid / hour
For some reason, i cannot get the half ceilings over the tanks. I've tried putting the tanks down first, and putting the ceiling on first and either way, it blocks me from building. Its like the tank is too tall. Anyone run into this? Or maybe im using the wrong tiles?
u placed it close to the body of water. it should be far enough from the any river shores but in some places on the map it's just like that, and ppl say this is a bug
I think they fixed this after my vid 🙄 But you still can place Water Purifiers right on the top of Water Tanks. Will be the same result, but not so nice look ofc
@KIANL-GAMER man that's silly. We'll I'm trying another method where I raise the small foundation up higher where the ceiling attaches to the foundation instead of the side walls. It just raises everything up a few feet.
1) place first layer with grid snap enabled 2) disable grid snap 3) use ALT + Mouse Wheel to raise the pump up a bit 4) enable grid snap again 5) place the rest of the layers
@@KIANL-GAMER thanks! this did helps, but still i cant do like yours, perfectly clip to each other leaving 0 gap at all.. mine still has a tiny little gap for some reason
01:57 ("1 Pump = 4 Polluted Water / min ...") is misprint. Correct: "4 Polluted Water / 5 mins" 😐
But the calculations are still correct, cos it's still 4 * (60 / 5) = 48 PW / hour.
Also you CAN'T place ceiling over the tanks like that anymore, but you still can place purifiers directly on the top of the tanks, and you will have the same result.
Do you know if they have fixed or improved it so that you don’t need to go to your barrel manually?
Also when you do purifications do the beasts ever damage the pumps or can they only damage structures per se (floor, walls, etc) but not devices?
@@SToad no idea
@KIANL-GAMER it doesnt work. I need to put Manuel unrefined acid in the barrel
@@mw___pictures7691 he stated that in the video @ 3:34
@@LemonTreePH yeah i didnt watch full, cause i already got a acid farm
once human community needs this guy more thenn any content creator. I appreciate this alott man!! u have no idea how much you are helping! KEEP AT IT!
I can do around 1290 per day. I have 16 pumps and 5 barrels. I cut off 10 pumps when I'm in my barrel acid phase. That allows polluted acid to keep pumping and keeps the barrels active constantly. I also cut on 2 water osmosis units to keep the barrels fed with clean water. I have to go down and pull water from a dirty water source. It's nice because I have the luxury to cut on and off the pump when necessary.
Nice build, btw. :)
Beautifully executed video, truly clear and amazing breakdown on the math behind it, which is exactly what i was looking for. Thx!
Wish every vid was like this
The problem with farming this acid is that when you are offline, three-quarters of it will be filled with pure water even though all four spots are full of polluted water. It only works properly when you're online.
Not only that but you also have to consistently empty every water storage unit which isn't bad if you have like 12 water storage units
Nah bro put ur water pump on ground
It will then only collect polluted water mine only collects polluted water
Put your pump on the ground not near water
@@rss1767 That don't make any difference. when not online it turns polluted water into purified water.
That is the best setup I’ve seen yet. Thanks for your dedication. I will copy this for sure, just not that many pumps as I only have 4 gens going at the time.
glad you liked it.
I will publish better one soon
Thank you. This is helpful. I’m going to try it out. I was so lost lol
amazing guide. love your compact and efficient setup! didn't know we can stack water pump this way
my base is 95% on water so compact setup is really useful to me.
Well done for figuring out how to use ai speech for long clips 🤝👏👏
The funny thing is, this takes way longer to produce instead of just "freestyling" the script.
@@keksin2995 Thats why it has production value
@@richcollins513 AI voice videos are sub-par imo. Many agree. Still learned what I needed to know though.
@@notoriouspc he has said in other videos his spoken English is not that good, so I find the video even more valuable knowing he goes through all of that to share all this great info
im so blazed to keep up😂😂
It took me a while to get done, but I have it done like yours is. I can confirm that I have about 32 watts remaining by using 7 deviant generators and 7 eels. I have Generator: Electrical Expert which allows for a 7th generator, and provides an additional 2W from each source
I wrote this about 20 minutes after I finished, so I don't have a production count yet.
I wondered how this was to be powered. I believe I have Genny expert unused cause i didn't understand the tooltip. Server shutdown night so have to check in morning found a "foolproof" way to get eels so... Right now I am only using four pumps on two gens. Thx this helps.
Love this vid! very well done
Brillient! Thank you for the great video!
5 min viedo with only information instead of 30 min wanabee youtubers crap talk,sponspors and etc!!! THANK you, easy to understand and without that gibberish streaming shit ;)
Looks great, I'll redo mine tmw, cheers mate.
FINALLY, a good guide on this shit
Real nice job ! im doing some adaptations to get rid of that small water pump, just for the chalenge, but somehow positioning the big water pumps is a real nightmare, how did you do it so easy?
hey, new building guide will be released today. In the upgraded build it will be much easier.
1) place 1st layer of pumps, using grid snap
2) disable grid snap
3) use ALT + mouse wheel to raise pump up a bit
4) enable grid snap again
For the rest layers correct height should be applied automatically.
Nice setup , but the real problem is that when we are offline the barrels only produce 1 acid instead of 4
wait, really? Why is that?
@@MrBdericks i don’t know why , but i tested it
True, i put 1000 Impure Acid in each slot and when im offline its just using the Inpure Acid from Slot 1. There is always less Impure Acid in Slot 1.
How did you place the small stone ceiling while the water tank is placed inside already? I tried copying it but it doesn't allow me to place it
well, I can't too now. I think they fixed this yesterday.
but u still can place Purifies directly on the top of tanks.
will be actually the same 🙄
@@KIANL-GAMER Try bumping up the end pieces one step (raise them one over the floor) and you can place it just fine. micro adjustments to the rest are easy from there
Nice Vod! The hardest part for me, hands down, is to make all the pumps to be so symmetrically aligned! I just cant do that! Each one of them always ends up placed a bit off for one side or to another side...or a bit too high...or a bit too low! Its a visual mess! LOL
Amazing! thanks for the hints
im having problems placing the ceiling above the water storage how did you do it
this was patched. but you still can place water purifier directly on the top of the tanks. will be same result
also, updated factory will be released soon.
@@KIANL-GAMER ah i see i just added another small wall on top of the half walls so they fit to fix it. Still the game is buggy and when you leave the farm un rendered the osmosis produces purified water instead of the impure acid i hope they fix this
amazing set up
will be even better soon.
Amazing video! Like it
If it doesn't bother you, can you also make an Oil Farm Guide, too?
Yes, soon
How are you snapping the waterpumps so darn well ontop of eachother like that?
BRO IM IN THE SAME BOAT. some of mine are even and then boom way off
they snap height automatically. u place 1st one, for second one u need to adjust height (alt + wheel), the rest will adjust auto
@@KIANL-GAMER Bro i cant get them nice like yours no matter what i try, it keeps trying to put it too high with alt wheel up
@@donblaa Does the very same to me, wich is infuriating... wich is stupid. It's literally just a game. :P
Hey great explanation and build! Are you planning to have an updated build for this? The roof doesnt attached on top of the water tank due to clipping on the new update.
Yes, soon
crazy man im assuming you run everything on breakers to shut down the production when you want to switch to purification and base defense?
Ofc. You can actually see a switchable pylon in the vid. I just haven't mentioned it
Everyone who did this, just had a blast with the pipe reset glitch from the last update 🤣
what does the glitch do?
its insane to me to see that people still complain even tho this is a full afk farm..
be happy that you dont have to farm actively like in any other game people
but i guess casuals be casuals
My pumps are in a polluted area, and they're far away from any water bodies and are placed on a solid ground. Not sure if it's a bug, but whenever I'm offline my reverse osmosis filters which are supposed to turn the polluted waters into impure acids somehow turned everything into pure water.
Raise your pumps as high as you can, if it's above sea level it will only pump polluted water
@@TGO1688 they're at the absolute highest, they're literally floating above the ground. I had a chat with someone in the official discord, it's actually a known bug, it seems I'm not the only one with the issue.
@@surrounndedbyClowns same problem and that bug works only in offline
@@Chuchi_Gucci yup
probably really bug guys, cos many ppl have same problem, as I see
you can try some other place then
the problem with all this min maxing is that. You don't get oil and water.
Two very essential things as well.
For beginners those are way more important that doing something like this. Even if you're in a stardust area that has oil you still need purified water to brew the impure acids into acids.
Relying on rain catchment is highly suspect as it doesn't work properly in some areas and only when it rains.
very clean set up 👨🍳
sick ai thanks
also u can get free impure acid, if u put on the top water rain colector I think is the name xD is a good passive source
Thanks the build! How are you getting the impure acid only into one water tank and the purified water only into the other water tank? I've re-watched this video about a dozen times and i can't figure it out!
you need to keep wall-mounted pump enabled. otherwise, impure acid will go from water purifier to the tanks below them, cos pipes will work in the opposite direction.
updated build will appear soon
Is impure acid meant to go water into the dirty water tanks underneath the purifiers? Cause only a few of them actually go into the tank on the other side. Most of them go back down. Is there a fix for that?
i wish theyd reduce the cost of pump farms or make a meme spec for it dedicating this much Ws is crazy. legit the only farm that cost this much, fuel farming is wayyyyy cheaper and just a lucritive. im glad i got sulfur chem spec hated running the farm.
Sulfur chemist is such a cheat if you're the one w/o it! At least that's what my friend says.
Honestly not even sure what you would need that much acid for not to mention the fact that you're basically used all your power on acid and water generation and have none left over for your furnace stove refrigerator deviations that need power
great video!
Am thinking replacing the pumps with rain collectors since after the patch it now gives you polluted water too. How many of those collectors would be enough in this case?
Anyone else have the bug where your pumps pull 100% polluted water until you log out then it starts pulling dirty?
Not sure if I'm doing something wrong but my barrels produce 1 acid/20 mins * 4 barrels * (60/20) = 12 acid per hour not 48.
Am I doing something wrong or do you need to have so much surplus impure acid you can fill all 4 material slots?
yes, you need to fill all 4 slots. only then will be 4
@@KIANL-GAMER how much impure acid does that require I just tried splitting 600 into the 4 slots of the brewing barrel and it just combined them all into one slot
@@GamerUnderDev 1000 for each slot, as far as I remember
Does it matter how intense the counter is will it make a difference in ur collection
I tried this, the water pump will not be saved in house preset or when you move your territory. So do this only if you already found a good base spot
did water pumps get nerfed? i tested the pumps in polluted water and in polluted land. it does not matter where the pump is located, in both cases the pumps only pulled 24 polluted water per hour (alternating every 5 min polluted water and dirty water, so every 10 minutes polluted water).
it's a bug, many ppl have it. just try another contaminated area
How do you put the ceiling over the water tanks? I've been trying different things for over an hour now and still cant figure it out
it doesn't work anymore. they patched this
but you can put water purifiers directly on the top of the tanks. will be same result
@@KIANL-GAMER You're still able to do it. It's just very tedious. I had did it but didn't have it the way I wanted it to, so I just put it directly on top.
Thanks for all your videos man, great way to deliver the info needed, I did notice something that I don't see a lot of people mentioning, in my setup last season I was collecting polluted water through my rain collectors 80% of the time, this season only about 30 polluted water per rain collector (something has changed by the devs maybe) I wonder if you know anything about that or if you can research that further, that would be pretty cool to find out 100% how it works better as you know because you want need to use as much power or as many pumps, also before somebody asks; no, it doesn't really rain but I still see the collector collecting polluted water. 😶
hey, thanks.
actually I haven't tested yet, but I will in the future I think
maybe this is another bug
Great idea, sadly, at least in my experiments, you can no longer stack water pumps like this.
1) place 1st layer
2) disable grid snap
3) alt + mouse wheel (raise it up a bit)
4) enable grid snap
5) easily place the rest layers
this is already overexplained. its simple. 10 pumps will supply 1 osmosis filter which can supply 2 fermentation barrels. build on land in a polluted zone. double that, thats how you get around 1000+ acid a day.
what and how many generator does this need? im tryna build small scale acid farm :D
also where/what spot do you farm acid without acid farm?
relax. the video is infinitely better than your text.
@@lolipopsweet3899 7 Devient Generators
@@lolipopsweet3899 polluted areas in game
Beautiful video! But I have a question where do I plug the power generator into? I made 6 deviation energy generator and wired them all together but now where do I wire it into for the farm to work
hey, to any part. or u can add a few switches on a side wall if you need
P.S. In a few days upgraded factory will be released.
@@KIANL-GAMER I ended up figuring out where to plug it ! Thank you! Best video ever kept it very basic and straight forward
I am unable to place ceiling pieces above water containers. It doesn't snap for me. I tried to place them and add containers after - doesn't fit :/
they patched this, so u can't anymore.
but you still can place purifiers directly on the top of the tanks, and you will have the same result.
an updated build will appear soon.
They seriously need to streamline this process lol. Holy sht.
Well there goes your whole power grid. You can also run extraction sites with food and make like 700 in 30 mins
You're spot on. With the food that drops 50% more acid, boosted with fruit tea, chef rex and the gourmet kitchen specialisation I get about 7-8 acid drops per mob.
Doing a silo with deviations is far more time effective as you're also getting other materials and stardust source and gold mods if you use a controller.
It doesn't hurt to have a passive income but I find 4 pumps running to 2 single purifiers which then feed into 5 barrels gets me around an extra 200 a day. With plenty of power left for the rest of a base full of sprinklers lights and oil refineries etc
Obviously other people will enjoy the game differently and that's ok too
Yep, now he has no power to do starcrom purification defense lol.
@@CommandoJenkins you know you can install a breaker to turn the factory off? and turn your turrets on? it is pretty simple
@@CommandoJenkins you do know it's not hard to have switch to power which area you want
with breaker :P
this is a good passive acid farm
Combine it ACTIVE acid farm to double the amount you get for less amount of time over time :P
If the eels seem like much, remember this is AFk farming and you don't need a combat deviation when youre not playing
where is this base location? i have problems in polluted areas to get actual purified water, but this factory is working like a charm. only issue is i should maybe put 5 barrels cuz i dont hit 1000 acid/day only about 800
The river bank to the northwest of Securement Silo Alpha
If you are wondering why your acid farm is producing purified water instead of impure acid when you log off, it's because the there's a bug currently that confuses two types of pumps, if you have them.
if you have water pumps in TWO areas, one pumping acid and another pumping dirty water (most likely an isolated pump for sprinklers - farming) the game will get confused and all your polluted water pumps will produce water instead of acid, whereas your dirty water pumps will produce impure acid instead of water.
when you log on the confusion is undone. so one way to solve this problem is farm a lot of water first, then delete the irrigation pump for sprinklers. then there will be no more 4000 water waiting for you when you log on.
Weird I’m currently farming oil and water with 1 pump for water and 4 pumps for oil and I always get oil and water properly. I guess this is an issue with impure water specifically, not oil.
Additional note. You can’t actually make 4 acid per barrel slot unless you have over 3010 weak acids to put into it. The barrels do not let you fill each weak slot individually only the first till 1001, then second slot for another 1000 and so on. Is why production may not be as straight forward if there is any hiccups with the purified water or power, as it always prioritizes putting the first weak acid slot till 1000 units are in, then second slot and so on.
true
what i did when i started my farm is fill only one slot on 3 barrels then drop all the leftovers into the last barrels till i filled the 4 slots then do that with 2nd barrel and so on and now im at 4 barrels with 4 filled slots and added a 5th one that's still at 1 slot.
how did you place 21 pumps? I seem to be at my build limit after placing the initial 20 in the factory. Are there other items that contribute to the max number of pumps you can have bc I have a little farm as well and am wondering if removing that would free up more pumps. I’m so confused 😢
Subbed and am excited for the future vids!
Hey. You have facility limit 250 items (at the top of the building interface). You have probably reached it. Pumps are facilities, same like turrets, switchers, terminals and other stuff.
@@KIANL-GAMER Nope that's not it, I'm at 207/250 and I am still getting the Space is full message. I'm well under the limit for all items except Power Generator which is 7/6.
I figured it out, I had some leftover barrels from my previous farm and those appear to contribute to the max Water Pump limit. After removing a barrel, I was able to place another pump.
@@PerzyYT Rain collectors, fermentation barrels and maybe oil destillers also shares the same limit as pumps
I am having a very hard time trying to align all the pump in one single vertical line. Took me hours to finally got it right. Alt+mouse wheel is very sensitive and I ended up having a huge gap vertically in between the pumps. Any tips on that?
Saving the setup in blueprint is not saving all the pumps. As I can’t build any pump once I extended the base tile, I ended up rebuild the whole thing from scratch every time I moved my base.
Yes, this is the problem with pumps - they always delete after u change base location and cannot be saved in a blueprint.
Tip - make a "shelves" for them, if u can't align them normally. First layer on a ground for example, then and half-block and ceiling, and place the next layer on this ceiling.
How do you power all this stuff? I only can have 5 generators and only have the small solar panels for now, but the most I see is 35 watts per generator which isn't even enough for that amount of pumps.
check out this: ruclips.net/video/tHx0IlORZ0c/видео.html
how are they stacking these water pumps and have them aligned so perfectly?
1) place 1st layer with grid snap
2) disable grid snap
3) ALT + mouse wheel, raise up a bit
4) enable grid snap again
Can I check is there a bug when brewing while offline. I offline for 6hour only woke up to realise I have farm 10+ unit of acid
I tried this and it worked, but why do I produce so little impure acid every day ? Do I have to dispose of the dirty water ?
Your pumps should bee placed far from bodies of water, then they will only produce polluted water - that's first.
Second - you need to fill all 4 slots of both water purifiers with polluted water (means u need accumulated 800 units of it). After this they will start work at full power.
P.S. Updated guide is coming soon.
@@KIANL-GAMER my pump is in the water and it turns out that is the wrong one, thanks for helping
very nice guide ty very much ... I'm having a problem where my pumps still getting sea water with polluted water even though i took them as far as i could inland away from the sea ... how to fix that ? should I move my whole base away from the beach ?
I think this is a bug. Try to move it to another polluted area. this may help.
personally never encountered this problem
@@KIANL-GAMER I finally could figure it out why ... in fly build mode i could glitch under the ground to find out there is sea water below the surface :((
i have a question i puted my pumps on the land in a poluted area near the sea and they still pumping sea water , i want them to pump only poluted to make acid , like you said in the video , if u put them on the land u get only poluted water , any idea what is wrong ? does that still work or ?
many ppl have same problem, try different location
my acid farm doesn't work when i'm not playing, btw with 10 water pumps, 3 osmosis converter , 3 tanks and 6 barrels, it only produces like 2-300 acid per day (600 impure acid - 40 acid) . Eating the Deviated Chops stuff and going to blackfeel city killing mobs for like 20 minutes grants me around 700 acid . they need to fix the barrels ratio and speed. also, why should a barrel require electrical power and why 10W ?!?
True, my base should produce 1440 Acid every 24 Hours but it's more like 400-500
@@HansGruberX1 yeah, seems like it doesn't work as it should. Hope it will be fixed with today's update.
Hei, for some reason i cannot build a ceiling above the watertanks anymore, did this change recently? What kind of wall did you build? I
they patched this. you can't place ceiling over the tanks like that anymore, but you still can place purifiers directly on the top of the tanks, and you will have the same result.
im confuse do i need tto connect the water pump you built to column to osmosis water purifier and the three water tank? thanks!
yes, that pump is need to transport polluted water from bottom tanks to osmosis water purifiers
I will publish updated build soon
@@KIANL-GAMER thanks! i appreciate your work . looking forward to it. tried this build and its working just fine. my problem is when i move the base water pumps gets destroyed. nonetheless this is superb thank you!
I rather do few cargo scrambles in an hour (active not passive farm) then buy acid from Nisa, cuz my acid farm is glitchy when Im offline.
Correct me if I'm wrong but when you're not online, the osmosis and processing of the entire setup slows down for some reason.
haven't tested but this is possible
It would be more helpful if someone calculated how much water 1 Rainwater collector can collect on average per day in Red Sand or the 6th zone, on average. So we could maybe rely on Rainwater collectors instead.
Hell, TBH it's prolly more simple to just do a semi-AFK dirty water farm, you can collect up 10K in one go, no idea how much time it takes, but I suspect under 20m.
hello im new, i cnnot place it like you did, its says its overlap and cannot place here
Thks. Being looking for this kind produce with formula coz I always extract too much or too slow. Need a balance. Hope can do a petrol one. But why is my wall mounted pump is 10W? Or I remember incorrectly?
wall mounted pump consumes 1W, common water pumps - 10W
The script you wrote is excellent - straightforward and valuable. I understand why you might use AI to generate the voiceover, but the delivery makes it a little hard to follow. Just some constructive criticism; thanks for the info!
How did you get the small ceiling pieces to snap over the tanks, mine wont snap over them at all.
doesn't work anymore. but you still can place purifiers directly on the top of the tanks
@@KIANL-GAMER Ahh makes sense, Thank you
Can you do one for Oil Pls
sure, will be soon
its not passive because you have to add the impure acid manually in to the barrells right? correct me if im wrong.
Hey mate, i've been losing ym brain over my setup. Have 27 pumps (overkill i know but just trying to fill slots D:) even spread into 3 storage crates, all going into 1 wall pump to the 2 osmos. Have made sure all pumps run 24/7 and i still never see the slots full. Any idea what i'm doing wrong? Great guides otherwise!
this takes time to fill production capacity. if u want full slots faster, u can temporary disable water purifiers and wait until they fill up
@@KIANL-GAMER Nah figured it out i'm a fool, i'm in blackfell oil/pollu and not sure if it was changed recently but i thought oil was every 10 but pollu was still every 5 mins, but they alternate. so need twice the pumps for oil/pollu zones
Im running 100% Polluted Water on my Osmosis water purifiers but sometimes, besides the impure acid it also appears pure water on the osmosis purifier output is this correct?
no. if it happens, it means ur pumps extract dirty water too.
you need to move them far from bodies of water or move to another contaminated area
@@KIANL-GAMERI’ve checked all my pumps no dirty water, also all my 3 tanks are maxed with polluted water, and the 8 slots on the osmosis are filled with polluted that’s why I find it very strange 😮
@@KIANL-GAMER Found the issue, its a bug, alot of people having it, when offline the Osmosis created Pure Water from Polluted Water. i tested by disconnecting everything and filled all Osmosis by hand with Polluted Water and went offline when i cant back the Osmosis outputs had both Pure Water and Impure Acid and the inputs where still Polluted water :( If i stay logged in the output is 100% impure acid.
The developers have said that they are going to make it so impure acid can be moved automatically.
I do not know it they have done it yet as of posting this message.
I think they changed something because the half walls don't stand tall enough to put a storage unit under them anymore.
great video but maybe my math aint mathing i have the 4 brew barrels but my math is only giving me 32 acid an hour maybe i did something wrong or im not counting for the 10 mins extra that carries over into the next hour
Hey. Each barrel has 4 slots and produces 4 acid once per 20 minutes, meaning 3 times per hour.
3 iterations x 4 slots = 12 Acid / hour
x 4 barrels = 48 Acid / hour
Would the machine pump more water if the pump was place on a deeper water?
in my tests - no
@@KIANL-GAMER thank you for the reply
Great videos, however, with the games 6 week reset, it's kind of pointless.....
I've followed the tutorial, but why does most of what output always have dirty water?
I'm in a high pollution area
place ur pumps far from bodies of water
You can save a lot on electricity by using rain collectors. Give you polluted water at no energy cost.
Meanwhile the sulfur chemists r cackling maniacally lol
because they started charging currency to make it?
Yeah its easy acid but at the same time really bad... 50 energy / acid lol... And 100 acid takes 8hour how is that worh it? @@nak3dxsnake
For some reason, i cannot get the half ceilings over the tanks. I've tried putting the tanks down first, and putting the ceiling on first and either way, it blocks me from building. Its like the tank is too tall. Anyone run into this? Or maybe im using the wrong tiles?
i have the same problem
Why does my waterpump also pull dirty water instead of just polluted water...
u placed it close to the body of water. it should be far enough from the any river shores
but in some places on the map it's just like that, and ppl say this is a bug
@@KIANL-GAMERcan you recommend some places then?
That should works...?
it's funny, of course, but I still couldn't cover the watertunk platform 3:17 ...
im just trying to figure out how you got enough materials to even build 20 pumps . im level 32 and have no where near enough materials
when you hit 40ish you probably will. farming acid is more endgame since you need tungstein. I would just focus on levelling and collecting deviations
how to build floors over the the water tanks. it´s not working
they fixed this. u can place purifiers directly on the top of the tanks
updated build will appear soon
where do you connect the wall mounted pump besides the tanks
tanks → pump → purifiers
Just use sulfur and energy links
Tja only problem. The Impure Accid does not go from alone into the barrels .
How did you stack the water pumps on top of each other
Just hold Alt a scroll a bit with the mouse wheel for 2nd height. For 3rd and 4th it will be auto, if u place them one by one
can i get pure acid from sea ?? cause my base on beach hit by
pollution
from sea u can get sea water and polluted water → impure acid → acid.
man im trying to build this thing and i cant seem to get the ceilings to go over the water tanks
I think they fixed this after my vid 🙄
But you still can place Water Purifiers right on the top of Water Tanks. Will be the same result, but not so nice look ofc
@KIANL-GAMER man that's silly. We'll I'm trying another method where I raise the small foundation up higher where the ceiling attaches to the foundation instead of the side walls. It just raises everything up a few feet.
I can't seem to stack the waterpumps, does someone know how he actually did it so effortlessly?
1) place first layer with grid snap enabled
2) disable grid snap
3) use ALT + Mouse Wheel to raise the pump up a bit
4) enable grid snap again
5) place the rest of the layers
@@KIANL-GAMER I'm going to try this out! Tyvm =]
@@KIANL-GAMER thanks! this did helps, but still i cant do like yours, perfectly clip to each other leaving 0 gap at all.. mine still has a tiny little gap for some reason