Copper based aur synthetic base ye dono supply karte hai. Aab tak bahut customers Liya hai. Aur achha naam kamaya hai. Is grease apply karne sey ye caliper pins ka action achha hota hai aur paani, kachada door rakegha. High temp mey achhi taraf kaam karta hai aur awaaz nahi karta hai. Thanks.
@@rashidmanais4752 Ye wali grease apko Pakistan may online nai milay gi aik website par thi lkn iski price Rs. 10,000 thi. Agar apnay grease leni hay to Toyota ki Genuine Grease lay lain. Toyota Rubber Grease naam hay 100 gram hoti hay Part number : 08887-01206 ye grease apko Rs. 1800 to 2000 tak mill jayegi online bhi available hay. Or ye grease ap brake service k lia use kar skta hain rubber boot ko damage nai karti or high quality hoti hay.
Too much grease on the slide pin it only needs a thin coat, Too much can cause hydro lock. As you push the slide pin in you are supposed to allow the air to come out. The pin and the boot should be compressed in when you are done. Also buy a can of brake cleaner, it's really cheap, better than using petrol.
Yes grease was too much because I cleaned the hole too. And when ever I do DIY after one week I always check the parts I opened that they are working properly or not. The pins were moving freely. If the air is trapped in and there is too much grease then the boot will get damaged. Using petrol was a bad idea I did another DIY of brakes on Corolla Altis which I will soon upload for that I used Liqui moly brake cleaner.
Hard work always results in success, keep it up bro, I am here to support you🖤
Thank you so much 😊❤️
Copper based aur synthetic base ye dono supply karte hai. Aab tak bahut customers Liya hai. Aur achha naam kamaya hai.
Is grease apply karne sey ye caliper pins ka action achha hota hai aur paani, kachada door rakegha. High temp mey achhi taraf kaam karta hai aur awaaz nahi karta hai.
Thanks.
Very good ☺️ brother
Brother I need this Grace
Thank you so much 😊❤️, you can use Toyota Genuine grease too it is easily available in Pakistan.
Informative
Thank you so much 😊❤️
زبردست معلومات۔۔ اگر بریک پیڈز تھوڑے جام ھو تو ان کو کیسے لوز رکھنا ھے
Zabardast
Thank you
A job well done brother👍🏻 keep it up. Also please upload more cultus content would love to see
Thank you so much 😊❤️ InshaAllah more Cultus content will be uploaded soon,stay tuned.
Weldone keep it up👍👍
Thank you so much 😊❤️
🔥
😊❤️
👍
😊❤️🥰
👍❤️
😊❤️🥰
👍👍👍👍👍👍
😊❤️🥰
This car i have in India,here called Celerio zxi
Online mil jye gi ?
Grease?
@@mdcarsgarage9535 g grease
@@rashidmanais4752 Ye wali grease apko Pakistan may online nai milay gi aik website par thi lkn iski price Rs. 10,000 thi. Agar apnay grease leni hay to Toyota ki Genuine Grease lay lain.
Toyota Rubber Grease naam hay 100 gram hoti hay Part number : 08887-01206 ye grease apko Rs. 1800 to 2000 tak mill jayegi online bhi available hay. Or ye grease ap brake service k lia use kar skta hain rubber boot ko damage nai karti or high quality hoti hay.
Too much grease on the slide pin it only needs a thin coat, Too much can cause hydro lock. As you push the slide pin in you are supposed to allow the air to come out. The pin and the boot should be compressed in when you are done. Also buy a can of brake cleaner, it's really cheap, better than using petrol.
Yes grease was too much because I cleaned the hole too. And when ever I do DIY after one week I always check the parts I opened that they are working properly or not. The pins were moving freely. If the air is trapped in and there is too much grease then the boot will get damaged. Using petrol was a bad idea I did another DIY of brakes on Corolla Altis which I will soon upload for that I used Liqui moly brake cleaner.
Bhai ye Greece chyeeee
Brake service k lia hii chayay?
@@mdcarsgarage9535 😅 off course bhai ......
untrain