Much respect to the builder. Very talented. I am an airline pilot and fly into airports that are also used by the military. So, I get to taxi by some very nice fighter jets like the F-16. They simply aren’t as dirty as scale modelers make their models. I know weathering is a point of pride, but I’ve never seen an F-16 this dirty.
CloudStreets, I agree. I worked maintenance on F-16's for over 20 years in the Air Guard, and I NEVER saw our jets looking like this. Dirt on a modern high performance jet fighter? What do they think, these fly off dirt runways?? The panels on these fit so tightly together that they must be closed in a specific order after maintenance, or they won't close at all. Even a 1/32 inch gap on a 1/32 scale model would be a 1 inch gap on the real aircraft. I don't know where this drive to over-weather everything came from, but it is definitely not realistic.
You are great Iv never built kits like this all I did was brush paint but decals on And iv missed so many points and you show each part like primer panel lines I’m guessing x-22 gloss and then all the steps for a decal Iv never done Thanks this is gonna upgrade my skill How do you work out 40% paint to 60% thinners
Καλή Χρονιά Περικλή, με υγεία και υπέροχες δημιουργίες!! Είδικά όταν καταπιάνεσαι με ελληνικά θέματα γινόμαστε και εμείς καλύτεροι. Μιας και η μοντελιστική αγορά στην Αθήνα, φθίνει σιγά-σιγά, το FS35237 θα το αντιστοιχούσες με το humbrol 144 ή το 145? Οι απόψεις ακόμα και στα forum διίστανται, το ίδιο και οι διάφοροι on-line πίνακες, οπότε η γνώμη σου θα βοηθήσει να ολοκληρώσω ένα mirage 2000.
Excellent. Just, if I can suggest something... When you working on smaller parts :cockpit, landing gear etc. Can you zoom a bit more on them so we can see less of your hands and more on parts you working on it. Best regards and keep video's coming.
Beautiful Falcon!! You are a brave man airbrushing without the lid on your color cup! I always spill if I forget it! Speaking of which, I also use a H&S infinity, do you find the lids don’t fit very well, and like to fall off?
This modeler is very talented, much better than me. But I'm still most impressed by the manufacturer, Tamiya. You could show me a bare part of the same type and scale of a particular model car or plane made by four different makers and I could easily tell which is Tamiya. It has finer detail, crisper edges, less flash and better fitment than Trumpeter, Hasegawa and light years better than Revell. Thanks for the tips in this build. Very helpful.
Another primo build! I have an unusual question: what is the name of the font you used at :11 for "Tamiya F-16 Jason" title? I enjoy cool fonts and would like to add that one to my collection. Thanks.
One of the best builds I have ever seen. Your finished model is impeccable. Totally accurate and realistic in every way.
thank you very much :)
Я тоже сейчас делаю такую же модель F-16.Cпасибо за ролик
Ενα πραγματικα υπεροχο εργο φτιαγμενο φυσικα απο εναν υπεροχο δημιουργο!!!Τα συγχαρητηρια μου!!!!
Σε ευχαριστώ πολύ 👍🏻
you have created an excellent model of a real AEGEAN defender , well done it looks ready for scramble
αριστειδη σε ευχαριστώ πολύ 👍🏼
@@PerisModels ελληνας εισαι? Τωρα το μαθαινω.
@@PerisModels α να σου πω ποσο τα περνεις .
@@thanos7086 ναi Θάνο
Καλησπέρα
@@thanos7086 τι εννοεις;
RESPECT from turkey...great work and really great details!
Thank you very much my friend 👍🏻👍🏻👍🏻
Sanada Saygılar Abi
Amazing ! It's always a pleasure to see HAF bird ! I hope there's more HAF projects !
Scale Plastic Workshop thank you
There will be more 👍🏼
Fantastic work. The F-16 looks amazing!!!
Man, that turned out beautiful. Great job, thanks for sharing.
Michael Lewis thank you
Amazing model, fantastic paint-and weathering job, well done mate
Thank you very much sir 🤙🏻
Much respect to the builder. Very talented. I am an airline pilot and fly into airports that are also used by the military. So, I get to taxi by some very nice fighter jets like the F-16. They simply aren’t as dirty as scale modelers make their models. I know weathering is a point of pride, but I’ve never seen an F-16 this dirty.
You need to see the greek ones 😁
CloudStreets.........I agree! I don’t what barnyards we sell these to, but you never seen this nonsense in the USAF.
@@goldenmanuever1176 i mean if you google amd take your time for 10 secons you can find really dirty and beaten up USAF planes too..😉
CloudStreets, I agree. I worked maintenance on F-16's for over 20 years in the Air Guard, and I NEVER saw our jets looking like this. Dirt on a modern high performance jet fighter? What do they think, these fly off dirt runways?? The panels on these fit so tightly together that they must be closed in a specific order after maintenance, or they won't close at all. Even a 1/32 inch gap on a 1/32 scale model would be a 1 inch gap on the real aircraft. I don't know where this drive to over-weather everything came from, but it is definitely not realistic.
Είναι εξαιρετικό το Video και πολύ διαφωτιστικό (όπως και τα άλλα που έχεις κάνει)!!! Συνέχισε!!!
Σε ευχαριστώ
Superb build of a stunning kit! I wish I could afford a kit like this!
Ray Theron thank you 😊
simply beautiful modeling work ! Greetings and congratulations from Poland !
Remarkable...patience & skill! Amazing builder!
Thank you
Fantastic work!
Ok, Beautiful job. Engine nozzle and cockpit are very hot looking. I enjoyed your building profile. Makes me want to build more and F-16's.
Thank you 👍🏻
Really nice work.
Just ordered this model! Going to be copying these techniques :)
Excellent choice 👍🏼
Just ordered mine today. I hope I'll get it finished at least a fracture as good as yours.
You can always buy another one 🤗🤗🤗
This is tamiya...simply the best!
Great work by the way. 👍
@@carbrosfalik726 thank you 🤙🏻
Εισαι φοβερός!
Σε ευχαριστώ πολύ φίλε μου 👍🏻
best model and great job
Well done!!!, spectacular
Thank you 😁
Awesome job. Respect from Greece. Please do some Turkish tiger F16.
Thanks
If I get a commission I will do
Nice work Peri ....!!!
Cheers 👍🏻😁
wow. great painting job. love it
Thank you very much 👍🏻
Very very very beautiful,excellent work !
Γεωργιος Ζωγαλης thank you 👍
thanks for sharing. this would be my navy aggressor color scheme.
You are more than welcome 👍🏻
Thanks for the excellent video and awesome work!
Thanks 😁
Thank you 😁
Wowww amazing painting job. Love ittt
thank you so much :)
Μπραβο το εκανες πολυ ωραιο αυτο και το f-16 zeus
Amazing built
Thank you 👍🏻
Mega nice! I build Formula 1 models. Now I got inspired to do this. :-)
Nice 👌
Great work. We are expecting Turkish Air Force F-16.
In the future 👍
Yeah it would be great to see a tiger meet F16 from 192 sqd.
Εξαιρετικό.Συγχαρητήρια.
ΕΛΕΥΘΕΡΙΟΣ ΑΛΙΦΙΕΡΗΣ σε ευχαριστώ πολύ 👍🏻
Fantastic.
Thanks
You are great Iv never built kits like this all I did was brush paint but decals on
And iv missed so many points and you show each part like primer panel lines
I’m guessing x-22 gloss and then all the steps for a decal Iv never done
Thanks this is gonna upgrade my skill
How do you work out 40% paint to 60% thinners
Thank you for your kind words
The ratios now are done by eyeball it my friend
Used to use pipette back in the begging
Geweldig, top gedaan👍
Thank you 👍🏻
Very nice work
Chris Simon thank you 🤗
Great! Thank for making video.
thank you
Excelent my friend Just perfect
Mαναριτζις1974 thank you 🤗
Perfect!👍
Superb!
Luis Pacheco thank you
Great video!
thank you!!!!
Καλή Χρονιά Περικλή, με υγεία και υπέροχες δημιουργίες!! Είδικά όταν καταπιάνεσαι με ελληνικά θέματα γινόμαστε και εμείς καλύτεροι. Μιας και η μοντελιστική αγορά στην Αθήνα, φθίνει σιγά-σιγά, το FS35237 θα το αντιστοιχούσες με το humbrol 144 ή το 145? Οι απόψεις ακόμα και στα forum διίστανται, το ίδιο και οι διάφοροι on-line πίνακες, οπότε η γνώμη σου θα βοηθήσει να ολοκληρώσω ένα mirage 2000.
Σε ευχαριστώ Παναγιώτη αλλα δεν το έχω ψάξει ακόμη για μιραζ
Θα δοκιμάσω το 145 κ βλέπουμε... Ευχαριστώ πάντως!
Πραγματικό κόσμημα για την συλλογή σου Peri!!!
Λεωνίδα σε ευχαριστώ
Ήταν παραγγελία 😁
@@PerisModels είσαι από την Ελλάδα?
@@paofanatikos4073 Ναι φίλε μου από Ναύπλιο αλλά μένω χρόνια Αγγλία
Peri's Models εγώ ζω στην Τανάγρα Βοιωτίας.
@@paofanatikos4073 θα έχεις λιώσει στα mirage ε; 😁😁😁
Wow just wow
Thank you 👍🏻
Very good!
pZero thank you 😊
excellent video, where do you buy the decals?, and the brand of the decals? thanks in advance!
My client gave them to me I cannot remember
Love these videos. How do you know exactly what color everything should be?
Research and more research
Discussions in forums
Excellent.
Just, if I can suggest something...
When you working on smaller parts :cockpit, landing gear etc.
Can you zoom a bit more on them so we can see less of your hands and more on parts you working on it.
Best regards and keep video's coming.
Vladan Covic thank you for the kind words and advise
The cockpit was the first of my videos when I was trying to find my way around making videos
Beautiful Falcon!! You are a brave man airbrushing without the lid on your color cup! I always spill if I forget it! Speaking of which, I also use a H&S infinity, do you find the lids don’t fit very well, and like to fall off?
thanks Ben
I never use the lid....I know one day I will regret it !!! but they don't fit nice :(
Peri's Models Well, I’m glad I’m not the only one! I love my infinity but that part bugs me.
Quick question. Where did you get the Flory models weathering wash dark dirt? I love what you did with it!
Directly from his Web site
Flory models google it
@@PerisModels perfect! Thank you so much!!
SUPER!!!
the glue with the green cap that brand is?
I see you use it a lot and apply it externally, is it a special glue?
Thank you 😉
It's Tamiya extra thin cement
Grazie! :)
great video. quick question; what kind of wash are you using for the landing gear well? is it just regular wash thats been diluted?
Thank you
Yes I used just normal oil paints diluted with white spirit
Very nice 👍👍
Abu Tayiba RC Videos thank you
Looks good was this kit built out the box 📦
Kel Gaither you can see the step by step videos in the playlist menu 😉
Kel Gaither sorry I misread your comment
The kit was a joy to build. The best f-16 In the market 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
Very nice build. Did the kitchen come with the plaquards for the cockpit?
Jason Beal thank you
What do you mean the kitchen?
Which plaquards?
Gotta love the autocorrection! The "cockpit" not kitchen. The prepainted instrument panel parts...were they included?
Jason Beal 😁😁😁
The photo etched are Eduard
i like IT !!!
Tofik thank you 😊
Awesome!
Ducesweden thank you 😊😊
This modeler is very talented, much better than me. But I'm still most impressed by the manufacturer, Tamiya.
You could show me a bare part of the same type and scale of a particular model car or plane made by four different makers and I could easily tell which is Tamiya. It has finer detail, crisper edges, less flash and better fitment than Trumpeter, Hasegawa and light years better than Revell.
Thanks for the tips in this build. Very helpful.
Thank you for the kind words
Tamiya produces an excellent kit 🤙🏻
Awsome,i'm buying that💩
louiska kruzs thank you
What do you want to buy?
Hello! Great job! Where did you get the Hellenic Air Force decals from?
My client sent them to me
Τα σπάει!!! Το cockpit είναι αυτό της tamiya ή κάποιο άλλο?
Της tamiya με eduard
@@PerisModels Ευχαριστώ πολύ Περικλή!
πανέμορφο αλλα εχω μια ερώτηση ποσο λεπτινες την μπογιά για to preshading και τι πυκνότητα είχαν οι στρώσεις καμουφλάζ?
Για pre shading 30-70
Τσ χρώματα της παραλλαγής τα έβαλα από το μπουκάλι κατευθείαν
@@PerisModels τοσο αραιωμένα ηταν?
@@a12-e3g Ναι είναι έτοιμα
@@PerisModels σε ευχαριστώ φίλε !
συνέχισε δυναμικά κι εμείς εδω να σε στηρίζουμε!
how was the engine painted?
Мастер своего дела 😁😎👌
Thank you 👍🏻
Excuse me for the stupid question, but is the landing gear metal like the 1/32 kits ? Thank you!
There is no stupid question just stupid answers 👍
The fear in the tamiya 1/32 is metal
Brilliant build, what the name of the book references you used
thank you for the kind words.
this is the link for the book. Viper under the skin
eagleaviation.gr/work/f-16-fighting-falcon-viper-under-the-skin/
Wow!
👍🏻
what is a good first time airbrush you would recommend to buy
I will go for a cheap Chinese copy from eBay so as you can get a feeling about it
Amazing detail and weathering, but without bombs or missiles?
Thank you very much
It is an anniversary plane and it never carry any weapons 😊
At 7:04 was that supposed to say xf2 Matt white not xf1 black?
Εχει καποια διαφορα το acrylic gloss με το clear gloss?
Όχι απλώς το gloss είναι ακρυλικο βερνικξ
Τι λες ρε φίλε, γίνονται αυτά τα πράγματα; Καλλιτέχνης !
Σε ευχαριστώ πολύ
😍😍😍
For sale?
Which music did you use in this video?
Free ones from youtube
請問一下你有沒有製作AH64E的阿帕契的直升機的模型呢？
Great job, but can you show more detail in how you doing the canopy with the black lining? It will be helpful for me. thxs.
Andy Cai thanks Andy
For the canopy I followed Eduard masking instructions
In he future I will build another one f-16 so I will show more
What decals did you use for this build?
Aftermarket ones
They were from a French company I dont remember
Another primo build! I have an unusual question: what is the name of the font you used at :11 for "Tamiya F-16 Jason" title? I enjoy cool fonts and would like to add that one to my collection. Thanks.
Το primer 1200 Πόσο το αραιοσες?
και με τι
50-50
Where did you get those little red bands ?
The remove before flight tags are from Eduard set
@@PerisModels thank you !
What thinning ratio for the primer?
Usually I go 50 50
👍!!!
Djamel Nini thank you 👍🏼
What type of this airbrush
Sharjeel Ahmad hi
I am using harder and Steenbeck infinity
οκ απλα καλλιτεχνης τι αλλο να πουμε, ΦΟΒΕΡΟ
σε ευχαριστω πολυ
What is the song's name at 9:32?
No idea
And I don't have the video any more
Sorry
@@PerisModels But you use it in almost all videos.
Red Air is coming.
?
@@PerisModels instead of winter is coming.
Red air. Red air is what the simulated adversary planes are called when doing training ACM
@@TahoeTime4457 cool 👍
Thunderbirds as f 16 jets
Maybe in the future
The kit is very expensive and hard to find
🇬🇷🇬🇷🇬🇷
Fantastic build. Terrible music...
Overdone the weathering, looks like a toy. Use the grey or dark grey panel line for a more subtle weather. Apart from that, 8/10
Thanks
@@PerisModels Your* welcome
*You're
φίλε μου και τι δε θα δινα για να το αγοράσω
Εάν σε ενδιαφέρει φτιάχνω κατα παραγγελία 😉
κατα Πόσο€€??
@@ΓιώργοςΕυαγγελινος-π4γ για 1/32 €1500 συν το μοντέλο και μεταφορικά
Απλα καταπληκτικος συνεχισε .
Σε ευχαριστώ 👍
Awesome video!!
TAKEOFF Models - 테코프 thank you