Hi just like to thank you for the fantastic video ,I had all the symtoms of the abs module being at fault 2002 volvo s 60T , I took out the module and re soldiered every pin, I put it back in first of all sealing it with silicone and then reseting it to your video and worked perfect saved me 1000 euro ,thanks again Anthony in Ireland
Superb helpful post tyvm Sweden- pulled mine out after dealer quoted 1500USD (unit = 1200 and 300 to do the install and 'flash' a new unit). I cut mine open super carefully with Dremel saw tool as shown on other posts; re-soldered the microcracks in the power cable connector pins- Voila! Problem disappeared. After re-install you get 'ABS Service Required' light which goes out within driving 3miles/5km. I was able to get away with using a 4mm 6-point socket instead of buying E25 Torx. Good luck!
Thanks for sharing such good and valuable information. I actually used your video to remove the BC module of a 2004 xc70 because it had the same electrical connector not the one suggested from XEMODEX. Best of luck!
Great video. You saved me a thousand bucks. Simply cracked open the module with the aid of a dremel, reflowed the solder joints, resealed and reinstalled. Like new again. Thanks!
Hey guys I have a 2000 S80 2.9 Volvo and I need to know I just put a new battery in them put a new ignition switch starter works good but it still won't crank anybody can give me any info on it that was so help me out a lot knowing what to do please respond back to me ASAP thank you
Much easier to simply repair the unit than to keep getting used units which are about to fail. Try Matthews Volvo Site for a write-up on how to touch up the solder joints in these units that cause the most problems. I did it on both of my V70s and to this day haven't had problems return.
Hi Yuri, I have a same S80 but it is 2000 model year. I got the same problem, ABS, brake and STC lights up. I change ABS computer, but same problem happened again. According to my diagnosis computer(I bought from amazon.com, about 130 dollors.), P1550 code for volvo pops up. It means front ABS sensors either left or right got malfunction. I take out both side of abs sensors, the driver side abs sensor cable is worn out. I can see metal wires. I changed it and problem solved.
hi, i saw u have a key with a picture of a opened trunk on the air condition panel. I think it should surve to open the trunk ^ ^. My question is if ur trunk raises itself, or it just opens and must be lifted with hand.
Thanks for posting video. It was amazing to watch what you did in short time. Now, I have a Volvo V 70 98 with the ABS lights on every time I am on the road. Beside that I also have a problem with ignition. The car turn itself off after 2 minutes or so after start, and sometimes even when on the stop sing by pushing brake pedal. What could be possible problem with ABS and ignition. Problem with ABS is I can feel strange brake and when car getting warmer light ABS is on, kind a not safe. Thanks
Is setting key on position 2 and then reconnect battery also good after resetting error codes? I normally only disconnect minus from battery and connect it again after 5 minutes? ( without key on 2 position) Problem here is code U1900 on a V50 1.8? Any tips my friend? Great video btw
volvosweden i have a volvo v70xc awd 2002 what module number do you think i need for my volvo i purchased one already and i dont think its the right one, and could you tell me specifically what i need
I just recently replaced my volvo s60 2002 abs module with another one from the junkyard these lights didn't go off. I was told by mechanic, abs module needs to be reprogrammed and paired with CEM to make it work. How come you didn't do this ? I'm kind of confused.
This is reasons at the meter warn "ABS SERVICE URGENT" ? So need to change this ABS module? My s80 t6 2001 is write on meter like that..someone can tell me it was right my problem is need to change ABS module?
This abs mod must of been programmed to your car already? I have a 2000 volvo s80 that has the same problem but if i buy one from the junk yard wouldn't i have to get it re-programmed at the stealers? or no?
volvosweden i followed and the lights still appear what should i do, where do i bring it i dont want to go to a dealer because the charge to much and i dont want to bring it to them because u have to purchase it from them, and there is a light with a triange and a car in it what does that mean, please respond asap. thanks
a have problems with my car Volvo s80 1999. a remove the battery and install a new battery and now my car wont start and the windsheild wipers wont stop. the starter is working but the car will not turn on.could you please help me figure this problem out.thank you
One thing about having a computer problem like that I would’ve first re-booted the car by disconnecting the negative -while it’s disconnected I would’ve turn the ignition key in the running position and turned it back off and then plugged it quick and then turn the key on the running position not over because just like a cell phone has the boot up so does the cars computer I bet u that was the problem was
volvosweden I put a reconditioned module in but the lights are still on. Do you think it is something else wrong or it needs reprogramming because its reconditioned?
Witam. Mam podobny problem przy swoim volvo. Mam małe pytanie do pana. Czy mógł by pan podać jakiś nr. Tel bądź jeśli nie chce pan na forum publicznym to puścić sygnał na ten 513623824 i ja oddzwonie... Z góry dziękuję...
Witam. Mam podobny problem przy swoim volvo. Mam małe pytanie do pana. Czy mógł by pan podać jakiś nr. Tel bądź jeśli nie chce pan na forum publicznym to puścić sygnał na ten 513623824 i ja oddzwonie... Z góry dziękuję...
Excellent instructor and brilliant instruction 10/10 from a mechanic.
Great, one of the most beautiful videos for abs repair. Good and competent. Thanks✌️
Hi just like to thank you for the fantastic video ,I had all the symtoms of the abs module being at fault 2002 volvo s 60T , I took out the module and re soldiered every pin, I put it back in first of all sealing it with silicone and then reseting it to your video and worked perfect saved me 1000 euro ,thanks again Anthony in Ireland
What do you mean re soldiered every pin? Like cleaning them?
What u mean re soldiered? Please i need information how to do that
Thank you for the video. I have the same problem with my volvo. Very straight forward instructions. Thanks again!!
Superb helpful post tyvm Sweden- pulled mine out after dealer quoted 1500USD (unit = 1200 and 300 to do the install and 'flash' a new unit). I cut mine open super carefully with Dremel saw tool as shown on other posts; re-soldered the microcracks in the power cable connector pins- Voila! Problem disappeared. After re-install you get 'ABS Service Required' light which goes out within driving 3miles/5km. I was able to get away with using a 4mm 6-point socket instead of buying E25 Torx. Good luck!
I have the same problem on my 1999 volvo s80! Thank you so much!
Glad it helps other.
Thanks for sharing such good and valuable information. I actually used your video to remove the BC module of a 2004 xc70 because it had the same electrical connector not the one suggested from XEMODEX. Best of luck!
Thank you very much for this video. Helps one volvo entusiast from Brazil!!!!
Great video. You saved me a thousand bucks. Simply cracked open the module with the aid of a dremel, reflowed the solder joints, resealed and reinstalled. Like new again. Thanks!
What do you mean reflowed?
Great video, I love the instructions and all the service resets
thank you very much for posting this video. Now I have the confidence to replace my 1999 ABS.
thank you for the clean video and speedy repair.
Thank you very much!! :-) good mechanic
That was a quality video! Thanks
Great instruction video! You guys really know how to produce a very good one!
Thanks Boss.....Great video, I have the same problem with my S80 T6.......
Always looks easy when a pro does it! Thanks again!
Thank you for the video have the exact problem with s60 5 speed manual 210k miles
Thank you guys for all the comments.
Hey guys I have a 2000 S80 2.9 Volvo and I need to know I just put a new battery in them put a new ignition switch starter works good but it still won't crank anybody can give me any info on it that was so help me out a lot knowing what to do please respond back to me ASAP thank you
Thanx for the instruction video. Saved me a hole lot of time :-)
If its a used unit you don't program it. Make sure the used one has same part number to make it work.
Brand new one needs to be programmed.
Good luck
if i buy used ,one is part number only thing I have to watch out for? or is it also year of manufacture that is also needed to be the same?
Как у тебя там чисто под капотом, красота!
Volvosweden. This is an excellent presentation. Very helpful indeed.
Thanks for a very informative video!
Much easier to simply repair the unit than to keep getting used units which are about to fail. Try Matthews Volvo Site for a write-up on how to touch up the solder joints in these units that cause the most problems. I did it on both of my V70s and to this day haven't had problems return.
Hi Yuri, I have a same S80 but it is 2000 model year. I got the same problem, ABS, brake and STC lights up. I change ABS computer, but same problem happened again. According to my diagnosis computer(I bought from amazon.com, about 130 dollors.), P1550 code for volvo pops up. It means front ABS sensors either left or right got malfunction. I take out both side of abs sensors, the driver side abs sensor cable is worn out. I can see metal wires. I changed it and problem solved.
thanks for great video and I am going to take it out again and replace it so i can beat your record
Hi, your videos are very helpful. I have s80 (2000) aswell, go VOLVO!
thank you.Very nice
Thanks! What do you reset exsctly with the locks trick?
What were the fault codes on the faulty ABS module????
hi, i saw u have a key with a picture of a opened trunk on the air condition panel. I think it should surve to open the trunk ^ ^. My question is if ur trunk raises itself, or it just opens and must be lifted with hand.
I just wonder what are those 6 brake lines for?
Where do they connect?
And why only 6?
I've heard that you need to get the module 'programmed' to the car. No?
No if you disconnect the battery.
отличный канал,жаль мало на русском, у нас проблемы с нормальными каналами по вольво.
Thanks for posting video. It was amazing to watch what you did in short time. Now, I have a Volvo V 70 98 with the ABS lights on every time I am on the road. Beside that I also have a problem with ignition. The car turn itself off after 2 minutes or so after start, and sometimes even when on the stop sing by pushing brake pedal. What could be possible problem with ABS and ignition. Problem with ABS is I can feel strange brake and when car getting warmer light ABS is on, kind a not safe. Thanks
where is the main computer located because I have a c70 from 2000 and I can't find the main computer to replace it ....can you help me
Super Video
love the instructions
Is setting key on position 2 and then reconnect battery also good after resetting error codes? I normally only disconnect minus from battery and connect it again after 5 minutes? ( without key on 2 position)
Problem here is code U1900 on a V50 1.8? Any tips my friend?
Great video btw
One of my screws were stripped really badly, I couldn't get it out. Any suggestions?
grind off the small head is the only option
@@AwakeDude911 my 00 s80 ended up getting totaled in a T bone accident. :(
with abs mod gone did u get a no start as well ??
how do you know so much about volvos? this was great information I would like to chat with you on some issue I'm having. If you are willing of course.
What about bleeding the system?
would it be same method/location for 2006 2.5T too? thanks
volvosweden i have a volvo v70xc awd 2002 what module number do you think i need for my volvo i purchased one already and i dont think its the right one, and could you tell me specifically what i need
Hi will this solve the "Anti-Skid Service Required" problem I've been experiencing on my Volvo T5
Not necessarily. You have to scan for codes.
I just recently replaced my volvo s60 2002 abs module with another one from the junkyard these lights didn't go off. I was told by mechanic, abs module needs to be reprogrammed and paired with CEM to make it work. How come you didn't do this ? I'm kind of confused.
I've had ABS issues on my S80. Who said you need a new module?
I have an 08 xc70 is that the same thing?
This is reasons at the meter warn "ABS SERVICE URGENT" ? So need to change this ABS module? My s80 t6 2001 is write on meter like that..someone can tell me it was right my problem is need to change ABS module?
This abs mod must of been programmed to your car already? I have a 2000 volvo s80 that has the same problem but if i buy one from the junk yard wouldn't i have to get it re-programmed at the stealers? or no?
no if it has the same numbers on it ..not serial numbers but code numbers
does the window reset you did on the sun roof also apply to resetting the automatic driver and passenger windows?
No. you have to hold down until it opens fully and than hold up until it fully closes.
volvosweden i followed and the lights still appear what should i do, where do i bring it i dont want to go to a dealer because the charge to much and i dont want to bring it to them because u have to purchase it from them, and there is a light with a triange and a car in it what does that mean, please respond asap. thanks
Is it the same procedure for 2007 S80 6cylinder?
yup
great video! Please keep them coming :)
a have problems with my car Volvo s80 1999. a remove the battery and install a new battery and now my car wont start and the windsheild wipers wont stop. the starter is working but the car will not turn on.could you please help me figure this problem out.thank you
Volvosweden do a 2.7 Engine size ABS module works for a 2.8 ? really appreciate it if you Help me with the question
To be honest I don't know. Sorry.
bra video, funkar detta på volvo v70 2.4t 2000
I think I have the same problem with my xc60 2010..
Would you rather share me with your xc70.. if you don't mind
thank you point taken....
One thing about having a computer problem like that I would’ve first re-booted the car by disconnecting the negative -while it’s disconnected I would’ve turn the ignition key in the running position and turned it back off and then plugged it quick and then turn the key on the running position not over because just like a cell phone has the boot up so does the cars computer I bet u that was the problem was
Por una volvió xc90 mod2006/ si le das de la llave da marcha pero arrastrando pero si le das directo arranca rápido sabes por hace ese tipo de falla
Hello. I have been told you need to reprogram the modules, is this true?
What I remember new module you have to reprogram. Used no.
volvosweden I put a reconditioned module in but the lights are still on. Do you think it is something else wrong or it needs reprogramming because its reconditioned?
good job thanks
Я аж назад перемотал- думал ошибся что русский язык услышал)).
Where is ESP sensor in Volvo? Its noisy when I turn. I took off ABS fuse and it's quiet but offcourse I shouldn't drive like that.
Дякую....
Отлично! Жаль что не на русском, а так однозначно байк!
part please. 949 6643 control. unit. volvo99s80. t6
были бы еще титры на русском ваще был бы огонь. спс
Volvo xc70
Все хорошо, а по русски можно сделать комментарий?!
Это первое видео на канале . Все остальные делаю на двух языках
Witam. Mam podobny problem przy swoim volvo. Mam małe pytanie do pana. Czy mógł by pan podać jakiś nr. Tel bądź jeśli nie chce pan na forum publicznym to puścić sygnał na ten 513623824 i ja oddzwonie... Z góry dziękuję...
По русски не судьба базарить,из далека лучше видно)
Это первые видео. Все новые уже на двух языках. Спасибо за отзыв вам.
@@volvosweden спасибо вам ,за ответ и пользу вашего дела.
I'm not taking advice from a guy using needle nose pliers.....
part please. 949 6643 control. unit. volvo99s80. t6
Witam. Mam podobny problem przy swoim volvo. Mam małe pytanie do pana. Czy mógł by pan podać jakiś nr. Tel bądź jeśli nie chce pan na forum publicznym to puścić sygnał na ten 513623824 i ja oddzwonie... Z góry dziękuję...