LG Dryer Repair - How to replace the Heating Element
HTML-код
- Опубликовано: 31 июл 2024
- Need help replacing the Heating Element (Part 5301EL1001J) in your LG Dryer? Watch this how to video with simple, step-by-step instructions for a successful DIY repair.
Stay safe during your repair! Be sure to check www.fix.com/safety/ for proper safety procedures before you begin. Use of this video is at your own risk, without liability to Fix.com.
Fix Part Number: FIX3527791
OEM Part Number: 5301EL1001J
Why you might need to replace the Heating Element :
1. No Heat
2. Not enough heat
What tools you need for this repair:.
• #2 Philips screw driver
• Needle nose pliers
The information in this video is specific to LG and Kenmore. To find a Heating Element specific to your model, visit www.fix.com
Not what you’re looking for? For more dryer repair help click here: www.fix.com/parts/appliance/d...
Where you can buy this part: www.fix.com/parts/dryer/kenmo...
Connect With Us!
/ fixdotcom
/ fixdotcom
plus.google.com/+fixdotcom
/ fix.com
Visit our blog: www.fix.com/blog/
Don’t forget to comment below and subscribe to our channel! 
Хобби
I can’t thank you enough. I ordered the heating element for my dryer and set my tablet up on top of the washer next to me. Then I played your video after having watched it a couple times earlier, and you and I together changed my heating element. I would never have thought I could undertake something that dismantled the dryer like this. Your step-by-step instructions were just what I needed. Thanks so much for posting this.
Thank you! Your help saved me the cost of repairing if not replacing my dryer. It only cost me $70, and that included replacing the belt also. I figured after 16 years, it wouldn’t hurt to replace it too. Thank you so much for this tutorial!
This video saved my ass. Thanks for the detailed instructions and names of parts with clear and concise camera work. For anyone else doing this diy, get zip loc bags for the screws for each part and label them, it'll help so much
Very comprehensive and easy to follow. You have given me the confidence I need to tackle this project! Thank you!!!
Fixed my dryer in 2 hours start to finish. That includes cleaning and vacuuming 14 years of dust and lint out of it as well. Only cost me $70. Thanks for the easy and straightforward step by step guide.
Thank you so much for this video. It saved me from getting a new dryer. The heating element replacement was easy enough. My issue was getting the backplate for the console seperated from the front assembly. (A screw was embedded to the sheet metal). I found it much easier to just disconnect the wiring from the console and taking out the backplate and the front as one piece.
Thank you for your time in helping us weekend warriors.
Thank you so much!!! People like you are a gem. I appreciate you taking the time and being so thorough. This allowed me to replace a little $13 piece (Amazon) on the heating unit instead of the whole heating unit, much less the whole dryer!
Thank you for this video! I fixed my dryer for only $50! Your calm demeanor and step by step instructions were so helpful! Thank you! My husband was so proud of me!
Excellent installation/repair video. Made the process so much easier. Thank you very much.
This is a clear gentle thorough teacher. Wow! He's really good.
D80, D85, D90 errors on flow tests. I got those error messages on the flow test with a brand new LG dryer like this. I had stumbled across someone posting having a problem with a new LG dryer having the heating element out of alignment in the unit and causing these error messages. After running the test with it completely disconnected from the household dryer vent pipes, I decided to open it up and see if my unit had the heater unit misaligned. This video was very helpful in getting my dryer apart to inspect the alignment of the dryer unit. It was off, having fallen a little over 1 inch out of alignment. This allowed the unit to scavenge air from around the heater unit instead of through the heater unit. I installed it correctly and bent the retainer tab properly into place and it works properly now for the first time since the unit was new!
Thank you for this video. It was well shot and easy to follow.
My wife and I just replaced ours following your perfect instructions. Thank you for saving us hundreds of dollars!
Excellent instructions, Thank you!
This is a very helpful video. I fixed my dryer with no issues at all and saved hundreds of dollars, thanks to you.
Thank you!! This video walked me right through, start to finish, and I now have an operative dryer again.
Thanks a ton for this. Just finished the repair with no issues. Very clear instructions. The only change I made was to remove the control panel entirely. I took a picture so I knew how to rewire it, but keeping it out of the way was a pain while it was attached. Thanks again!
Thank you so much!! I followed you from start to finish and voila, my dryer works again. Many blessings to you.
Perfect. Easy to follow. And simple to do while following along with the video.
thanks very much sir for sharing,God bless.
Fantastic. I actually needed to know how to get into the dryer to clean all the lint out (though the heating element is honestly probably the problem since it doesn't dry at all), and this tells me how to do both. Makes it look so easy.
Thank you so much! Perfectly shot and timed. Blessings for a good deed done!
You're a star. This information was just what I needed. I'm not technical but your video saw me through. Thanks so much.
I wish I had you to teach me all of life’s lessons. Thank you sir. A+++
Excellent tutorial. 5/5 Stars 🌟 🌟🌟🌟🌟
These videos are invaluable! Thank you for posting.
ok. just fixed my LG dryer, followed your instructions .. PERFECT!!!! 50 bucks for heater on amazon. Thank you.
Thank you SO VERY MUCH!! Your video walked me through replacing the heating element. I am very happy to have a dryer that works again. Hang drying clothes sucks!! Thank you for showing step by step directions!!
I'm pretty sure I could build a functional spaceship if this dude was giving me instructions.
This step by step process is perfect. You saved me hundreds of dollars!
Thank you for the thorough and methodical instructions. Made things much easier!
Excellent in depth tutorial! Thank you very much!!! 😊
Thank you Sir! Your video helped me on my repair today. Peace from Virginia!
Thank you for saving me a ton of money for service and possibly a new unit. Great video quality as well.
Hi, thanks so much for the video!
I am part way thru, and realized mine has the steam feature and the video has one with out. Still was able to figure out
and get it replaced
Thanks again!!
Beautiful video very helpful indeed! Thank-you!
Was able to replace my element with this tutorial, thanks!
Thank you so much you saved my family and I so much money I really appreciate it
Thanks so much for this step by step video.I was ready to buy another until I watched this. Again thanks for putting this out there.
Excellent tutorial and I would have not figured out the sequence by myself. I had to make a change in the sequence in that I needed to lean back the front panel before I could disconnect the door switch harness because that connector was a locking connector on my machine and I needed better access to disconnect it
Thank you so much! Just did the repair today and works like a charm!! Great video and shared it with my Dad :)
Glad it was helpful and thanks for sharing!
I needed this! Hat off to you my good sir!!!
In the time of COVID, I'm not bringing anyone into my house. My 99 y.o. dad lives with me! So - I turned to RUclips - thank you!
Great video. Super helpful!
You saved me $10k
Mine was the larger steam dryer and had quite a bit more electronics and is slightly different.This still worked though! Thank you!
Thank you. It worked!
Thanks pal worked out good
Thanks Young Man
Thank you very much this made it very easy to fix but when I was done there was a rubbing noise and it sounds like something is wrong with the band around the drum but after double checking it, it turned out that wasnt the problem any idea what it could be?
Muito bom gostei
What would the procedure be for blockage if upon the diagnosing process you discover that it isn't the heating element is there video upon that repair service ?
I felt that at 10:49😂 I’m doing mine with him
If my dryer doesn’t use that extra terminal because it only have one red wire and one white wire, does it matter which of the two terminals I put the white wire on? I’m talking about the piece on the left of the thermal fuse
why is the LG logo blurred on the machine? you have LG in the title lol
Thank you but what about direct drive
I replaced this as well as the thermistor.. still no heat. What else could it be
Dle177rm pull the heating element out inspect the coils coils has no brakes everything else it could be let me know thank you
My dryer is heating, but will trigger the breaker outside on any heat level, except no heat (air dry).
A 20 month old lg DLEX4370W. For a while, it would finish a load on Low heat, but now not even on Ultra Low :(
Could it be the heat sensor, the heating element (even though there's heat for the short time it runs), or the breaker itself?
Something else... please help provide most likely reason - lightly used high end dryer causing problems at a young age.
Look for electrical shorts to body... between temp. switch and coil. Improve or repair insulation. Peace.
How do I find the right element my dryer is the same exact one as this one.
Look inside the dryer door there should be a sticker on there with the serial number and model number. Pull the model number and type in heating element for xx dryer model number xxxxxxx into either google or amazon! I hope this helps you!
How can I tell if it’s the heating element or the dryer sensor isn’t working. I replaced the roller wheels with you yesterday. Now it’s turning nicely. But not heating up. 🤦🏼♀️ it’s about 10* outside and I don’t wanna go to the laundromat.
My dryer came with a thermostat with 3 prongs... the replacement I got has 2. I didn’t notice till I brought it home. Is it necessary to plug both white wires in the the thermostat? Are those grounds?
Hey I have the same question did you figure it out?
If only LG had made a big square access panel on the right side. LOL
After doing all this...and thank you for an easy to follow video...my dryer smells like something is burning. I’ve cleaned all the lint out too. Can you help solve my mystery?
I had the same concern, because it’s a brand new heating element, it’s going to smell the first few times. Then it goes away.
Question : The dryer heats up but keep tripping the breaker I discovered on the plug that you insert into the Elect. Outlet one of the prong next to the Ground prong charred and the coating of the prong burnt off as if a short exist in the dryer. or could it be in the cord itself What could be ? any idea.
It could very well need a new cord as well as the receptacle it plugs into in your home.
@@FixDotCom I checked the receptacle it is ok I have not installed a new cord but there was a wire attached to the element that was loose cleaned and reconnected it however it worked and then it tripped the breaker again maybe I should replace the element .
I'll be wearing something much more comfortable when I do this next week........
You can skip removing the drum.
The design engineers that changed the easy access to the heating element need to be kicked in the balls.......repeatedly
The design of these units is Absolutly an Anti- Right to repair tactic to get people to throw it away and buy new.
LG evidently wants you to spend far more than is necessary to replace the heating element. The older dryers allow access to the element from the back eliminating the need to tear the whole damn dryer apart! Just Ridiculous!!
You call this an easy job? :) The engineers creating this machine must be really stupid. To replace the heating element, do you actually have to disassemble the whole dryer along with the drum? Wow, this should be the smartest way to make a dryer :). Also, you have to attach the drive belt, blindly without even seeing what you are doing? Congratulations LG you are a really very smart manufacturer ...
How much easier it will be to design to open the back cover with 4 screws and have access to the whole system without having to remove the drum to replace one heater. Given that it is located at the bottom, it is absolute madness to reach it only from the top cover through the drum and disassemble the entire front panel...
And this is the work of the man who wants to go to Mars? I just can not believe it :)
Maybe you should create your own Dryer design then sell it to a manufacturer. Or do nothing but complain about it
@@jasperstephens9333 Good idea. For 20 years working as fixing washing machines and electric appliances, I may think to construct a dryer machine:)
Great video ! Thks.