Great looking piece. Can you share what brand and model you ended up with? Would also be quite curious to hear how you like it as you get to use it as well.
I can already tell you the difference is AMAZING. Just think about having filtered air pushed into your helmet and face shield. The fans are pretty strong.
@@drstrangefart Thanks Allen. I haven't shaved since Quad State so my 3M 1/2 mask doesn't seal anymore. It works better than nothing but thats not good enough. I'm going to check it out.
Just found you on the youtubes and subbed. I wanted to ask you a question,. You mention in this video that you're looking for a mid-range forge because you current forge is burning a tank of propane in 40min. Are you talking about that oval forge with the double burners? I ordered a similar forge from Devil Forge and it should be here tomorrow but now im worried its going to burn to much propane to quickly. Can you elaborate on that? were you using both burners wide open and at what propane pressure? Also, can you give an update on that forge and the state of the refractory? Thanks in advance and Take Care!
Yup. Big Hell's Forge 2. Yeah, running both burners wide open will freeze a 20lb tank fast. You'll really want a way bigger tank for it. Next time I have a project going in there I'm gonna stuff the back half full of fire brick and run it single burner to see what happens. I did about 1/8 inch of Satanite all the way around the inside of it and it's held up well enough. Hard firebrick on the bottom of the forge to take abuse.
And I think the pressure was 20lb, I used the regulator it came with and just cranked it open all the way. Anything less and it had a hard time getting hot enough to work. Even with both ends closed up. I may have it set up wrong.
I'm glad we could get you taken care of baby! XOXO
Congrats Mr Shiney, Making sharp and pointy things with mirror finishs. I am glad you have the gear now. Hopefully it will get some good use.
I hope so. It's definitely gonna make grinding a LOT more pleasant
Great looking piece. Can you share what brand and model you ended up with? Would also be quite curious to hear how you like it as you get to use it as well.
TREND AIR/PRO Airshield and Faceshield Dust Protector www.amazon.com/dp/B002Q0Y5IU/ref=cm_sw_r_cp_apa_i_i9wJCbAGFGFJR
I can already tell you the difference is AMAZING. Just think about having filtered air pushed into your helmet and face shield. The fans are pretty strong.
@@drstrangefart Thanks Allen. I haven't shaved since Quad State so my 3M 1/2 mask doesn't seal anymore. It works better than nothing but thats not good enough. I'm going to check it out.
Great rig! Let us know how the battery life works out. Thanks Allan!
Will do. If you don't hear anything out of me about it, it's good.
Nice respirator! 😃👍
Awesome respirator, take care 👍
Well what is it, where did you get it and how muchwill I be spending? I know a grumpy old man who needs one.
TREND AIR/PRO Airshield and Faceshield Dust Protector www.amazon.com/dp/B002Q0Y5IU/ref=cm_sw_r_cp_apa_i_i9wJCbAGFGFJR
It ran us about $400.
How much was that mask?
A hair under $400
Surround sound in there?
Sure, why not?
Sweet!! that sounds like a great idea.
I'll line up live streaming with the next session. We meet up roughly once a month.
Excellent news! Hope you have a great game buddy!
That is awesome!! I want to get one of those so bad!!
I like that gadget a lot! Good move says I
Lookin good Darth.
Looks good man!
That’s awesome man I got just a 3m and it works good for me but stay safe man!
Just found you on the youtubes and subbed. I wanted to ask you a question,. You mention in this video that you're looking for a mid-range forge because you current forge is burning a tank of propane in 40min. Are you talking about that oval forge with the double burners? I ordered a similar forge from Devil Forge and it should be here tomorrow but now im worried its going to burn to much propane to quickly. Can you elaborate on that? were you using both burners wide open and at what propane pressure? Also, can you give an update on that forge and the state of the refractory? Thanks in advance and Take Care!
Yup. Big Hell's Forge 2. Yeah, running both burners wide open will freeze a 20lb tank fast. You'll really want a way bigger tank for it. Next time I have a project going in there I'm gonna stuff the back half full of fire brick and run it single burner to see what happens. I did about 1/8 inch of Satanite all the way around the inside of it and it's held up well enough. Hard firebrick on the bottom of the forge to take abuse.
And I think the pressure was 20lb, I used the regulator it came with and just cranked it open all the way. Anything less and it had a hard time getting hot enough to work. Even with both ends closed up. I may have it set up wrong.
@@drstrangefart Thank you so much for taking the time to reply. Looking forward to more of your video's.. .
No problem!
Better safe than sorry Darth Vador.
You ain't kidding. I knew I needed it, just held off because of the price.
Nice!
What it called
TREND AIR/PRO Airshield and Faceshield Dust Protector www.amazon.com/dp/B002Q0Y5IU/ref=cm_sw_r_cp_apa_i_wzp-CbZEGQPWC
and how did you miss Luke i am you father
That quote is incorrect and the correct one didn't fit. I'm that petty.
FIRST
you cheated