@@danielpineda9920 it looks like he is fully knowing what he is doing... But yeah sir Could that Torque Wrench be made for a different engine? is not it just fine to over tighten crank bearings
Bossing sonata 2015 LPI CVVL engine din kotse ko dto sa BAHRAIN imported from korea LPG ang karga nong nasa korea pro ngayon converted to petrol na 3months ko ng gamit,my ginawa kna bang LPI engine jan?
None of the 4 cylinders unless you are ready to do a combustion chamber flush every year or 8,000 miles. A Korean mechanic tore into a 2022 Optima with a 2.5L using oil after 9,000 KM. Their 4's are a bad design, the top ring is too close to the top of the piston so it gets sludged and carbon build up from GDI and EGR system. Resulting in oil consumption. I have a Tucson Turbo with 48,000 doing ok right now, but I started doing the intake flush 2 years ago, use only full synthetics, run premium fuel for the detergents. The 2017 Sportage with 68,000 is using a qt. of oil in 320 miles, going into Kia for a professional flush since it has warranties in 2 days. Had I know about this, I'd of got a RDX, MDX, or Rav4 and paid more.
No point using a Torque Wrench if you are going to ignore the click and carry on tightening past that point.
You don’t know how much this is bothering me watching that part of the video 😂😂
@@danielpineda9920 it looks like he is fully knowing what he is doing...
But yeah sir
Could that Torque Wrench be made for a different engine? is not it just fine to over tighten crank bearings
ماشاء الله شغله نضيف
ملاحظه خطيره عند تركيب راس المحرك يجب ان لايكون المستم الاول او الثاني فوق يجب تسويه البساتم في الوسط
ANG LINIS NG PAGKADALI MO KABAYAN,,GOOD JOB.AND MORE VLOG PA KABAYAN
Thank you sir
Very nice
Maestro buen día una pregunta cuantas libras lleva el torque de culata hyundai sonata motor L4G año 2005 gracias
Loved it Good content
Sería tan amable en hacerlo en español tendrá un vídeo de un sonata motor 3.3 año 2004.
Pa recommend kabayan, apply ako dyan.
Bossing sonata 2015 LPI CVVL engine din kotse ko dto sa BAHRAIN imported from korea LPG ang karga nong nasa korea pro ngayon converted to petrol na 3months ko ng gamit,my ginawa kna bang LPI engine jan?
What are the torque specifications of the crankshaft and connecting rods
Do it properly do an LS1 upgrade
That crankshaft should not spin that easily, rod bearings easily too much clearance. Won't last long.
Saan k sa Riyadh na company brod d2 ako sa los angeles
Sa riyadh po ako may talyer kami na nagmamanage ty
Nf sonata 2.0
Asian brother, would you still recommend buying a Hyundai/Kia ?
None of the 4 cylinders unless you are ready to do a combustion chamber flush every year or 8,000 miles. A Korean mechanic tore into a 2022 Optima with a 2.5L using oil after 9,000 KM. Their 4's are a bad design, the top ring is too close to the top of the piston so it gets sludged and carbon build up from GDI and EGR system. Resulting in oil consumption. I have a Tucson Turbo with 48,000 doing ok right now, but I started doing the intake flush 2 years ago, use only full synthetics, run premium fuel for the detergents. The 2017 Sportage with 68,000 is using a qt. of oil in 320 miles, going into Kia for a professional flush since it has warranties in 2 days. Had I know about this, I'd of got a RDX, MDX, or Rav4 and paid more.
@@lonniebeal6032 Thanks for your time Lonnie. I will either buy a newer Honda or Toyota. No wonder you don't see Korean cars on the road.
How much are main bearing bolt torque?
Nasa pinas kaba kabayan
Ala boss nasa riyadh pa ako