Mass Spectrometry Tutorial: How to Tune Your Analytes

Поделиться
HTML-код
  • Опубликовано: 20 янв 2025

Комментарии • 39

  • @LilGugz
    @LilGugz 6 лет назад +3

    This is absolutely fantastic, thankyou so much for putting this together so nicely edited. Even though we use different instrumentation, different samples and analytes and software, the science remains the same. Thanks heaps!

  • @michaelzumpano7318
    @michaelzumpano7318 5 лет назад +3

    Well done. Nice workflow and everyday-practical vs exhausting!

  • @girishgurbani7395
    @girishgurbani7395 5 лет назад +5

    Thank you for explaining basics.

  • @liverpoolfugl
    @liverpoolfugl 5 лет назад +7

    " 'Tune' in for the next video". Nice one

  • @foc2241
    @foc2241 5 лет назад +3

    great Video, could you also Explain the Compund Optimization and FIA?
    BR

  • @MANIKUMAR95950
    @MANIKUMAR95950 3 года назад +1

    Mam there is a caption under your PHENOMENEX logo that is "BREAKING WITH TRADITION"
    Is there any scientific meaning in that
    I want to know the meaning of the caption
    my thought about this caption is "IN LIQUID CHROMATOGRAPHY SEPARATION OF COMPOUNDS BASED ON THE RELATION OF MOLECULES WITH COLUMN MOLECULES ie. RELATIVE AFFINITY"
    So the compounds present in the sample will break relation with column materials slowly and elute one by one.

  • @AbdifetahIOmar-zd6gh
    @AbdifetahIOmar-zd6gh 5 лет назад +2

    Nice explanation. could you please show us method validation for LC-MS I want to estimate the concentration of drug in the sample

  • @laboratorylab9214
    @laboratorylab9214 4 года назад

    Thanks I just infused Dopamine into my Mass Spec with this video!!!

  • @franciscoleniz6460
    @franciscoleniz6460 3 года назад +1

    Thanks for this great video!

  • @smart9924
    @smart9924 2 года назад

    For every changes you did in the computer sample was being drawn right from the tube? Like it was not used instantly?

  • @hashrafi7148
    @hashrafi7148 Месяц назад

    very helpful! thanks!

  • @msach4277
    @msach4277 3 года назад

    in looking for natural products compounds for specific properties; - even if literature provides possible masses of compounds, there is not enough material to do a tune. What is the best approach for this situation?. Fractions of plant extractions were collected, and would like to analyze these fractions at possible masses found in the literature to start. So do not really know the mass, and volume is approx 50ul or so. Thank you

  • @RAdmJoe
    @RAdmJoe Год назад

    When tuning analytes concentration for the API 6500?

  • @SubodhKumar-io3yr
    @SubodhKumar-io3yr 3 года назад

    Thank you very much for this usefull video.
    Declustring potential must be same for all transition.?
    What is the benifit of multiple channel averaging?

    • @xtallegacy1183
      @xtallegacy1183 3 года назад

      DP will vary from compound to compound. MCA just ensures a good average is obtained and reduces variation in apex of peak

  • @dennike2998
    @dennike2998 3 года назад

    Cool! Thank you! Very professional! Best regards!

  • @rajalsanathara6880
    @rajalsanathara6880 2 года назад

    Can we optimize the parameters for drug and Internal standard at the same time, using a mix of drug and ISTD at around 100ng/ml..? I really got surprised to see the DP optimization after the CE optimization. Will definitely try this way next time in my lab. Thanks a lot, ma'am.
    Regards from India 🇮🇳

  • @umasankarkonijeti1803
    @umasankarkonijeti1803 4 месяца назад

    Thank you so much ma'am 🙏

  • @Phasianidaes
    @Phasianidaes 11 месяцев назад

    Does anyone know the brand of that column washing machine?

  • @yusophmanalundong2948
    @yusophmanalundong2948 5 лет назад +3

    Hi there!
    So for unknown compounds, like for natural products. How do run an MS/MS? Thanks...

  • @mohammadmufiz1529
    @mohammadmufiz1529 5 лет назад

    Mam How to identify that Molecules are consist Positive polarity or Negative Polarity??

  • @imsopowerful
    @imsopowerful 3 года назад +1

    Please explain Source gas parameters also

  • @mdlund0
    @mdlund0 5 лет назад

    What rate are you pumping at (I have a manual syringe pump)? 100 ng/ml @ 5 microliters/min? 20? 200?

    • @Phenomenex
      @Phenomenex  5 лет назад +1

      Hello! Unfortunately, the scientist who starred in that video no longer works in our lab. However, SCIEX does recommend 5-10ul/min. You can find their full manual here sciex.com/x51122. I hope that helps! However, if it doesn't, please reach out to our technical experts at Live Chat at www.phenomenex.com/chat.

  • @robertlei6112
    @robertlei6112 2 года назад

    Would you like to sell this used system? I am interesting to buy this used equipment.

  • @sonivishalashleshkumar5096
    @sonivishalashleshkumar5096 5 лет назад +1

    Very interesting 👌👌

  • @leninjuly8398
    @leninjuly8398 5 лет назад

    Hi. Could you made other video, explaining how to process using UHPLC HRMS/MS, for give attribution to unknown compounds the formule,retention times, fragment ions, becuase when you run a sample and process the base peak (ms1) you have retention time, but in ms2 you have other rt of the some and not are the same from the chromatogram.I hope you can understand want I can to say. By the way great video:)

    • @Phenomenex
      @Phenomenex  5 лет назад +1

      We are so happy that you found this video helpful! Thank you for that:) I reached out to our partners at SCIEX regarding your question. Here is their reply:
      "With high res instruments, most people don’t really do tuning in the same way as for QqQ instruments. There are a couple of reasons for this:
      1. Usually HR instruments are used for more qualitative work, so the quantitative needs are not as great
      2. Generally quant is done from the ToF scan, so fragmentation is not used for quant (although it can be!)
      If someone wants to do HRMS quant in a way similar to a QqQ, what we call MRM-HR, the tuning process is similar. They need to ramp collision energy to get efficient fragmentation. It is a little different because there will be one CE setting to generate and monitor multiple fragments, not a CE for each MRM. Other parts of the question are a bit confusing, I’m not sure how to interpret."
      Here’s a video link explaining the scan.
      sciex.com/community/application-discussions/technology/qtof/fundamentals/multiple-reaction-monitoring-high-resolution-mrm-hr-scan-function
      Hope this was helpful!

  • @AnalystRK
    @AnalystRK 6 лет назад

    I wanted to learn to how to use it when i was working on my research. My lab attended left me with the machine without any instructions. I ended up jamming all tubing due to solid particles. In the end i had to pay 100$/sample to other lab, to get readings.

    • @anycolorulik
      @anycolorulik 6 лет назад

      You must use MS grade solvents only and filter through 0.22um membranes ideally. This avoids particulates. Where is the machine located? People at your lab who know how to run these instruments forget how challenging it can be to become proficient.

  • @asdradiocontrolmodelscafat7533
    @asdradiocontrolmodelscafat7533 4 года назад

    thank you

  • @prajwalgupta5467
    @prajwalgupta5467 2 года назад

    Best video

  • @greeleyestateslove
    @greeleyestateslove 3 года назад

    Are these things able to be manipulated/hacked to influence the results? I looked at a piece of research that I'm concerned about the origin of the machine....

  • @hsdengineering
    @hsdengineering 4 года назад

    We offer turbo controller repair for Mass spec systems

  • @im_so_ronery
    @im_so_ronery 5 лет назад

    Fentanyl! yummy! Nice demonstration.

  • @marwaabdalla4676
    @marwaabdalla4676 3 года назад

    speaks soooo fast

  • @bannor216
    @bannor216 2 года назад

    More like...AB Seinfeld