AWESOME $100 Brushless Basher | SCY 16103 GANTRY PRO
HTML-код
- Опубликовано: 3 окт 2024
- SCY 16103 GANTRY PRO Available here @Makerfire
bit.ly/3ZuXgxF
11.1V 2000mAh 25C 3S Battery T Plug for SCY 16103 Pro Car
bit.ly/3ivBN7d Use Code PERTHWESTOZRC for extra discounts on all listings
Makerfire Crossing Pond Video 1 • Unlock new sktill to d...
Makerfire Crossing Pond Shorts Video • What's wrong with this...
Product Description:
Product Configuration: 1/16 electric four-wheel drive truck
Product Material: hardware; electronics; plastic
Product Size: 30*23*11.5 CM
Remote Control Size: 13*7.5*21 CM
Car Battery: 7.4V 1500mAH 15C Li-ion battery (T plug)
Charging Time: 3-3.5 hours (USB balanced charge)
Handling Time: 15-18 minutes (continuous running at full speed)
Charger: USB Balance Charger
Remote Control Distance (meters): ≥120 meters
Remote Control Battery: 3 "AA" (not included)
Brushless Motor: 2840 brushless motor (4000 KV value)
Servo: Three-wire 17G digital servo
Wheelbase Parameters: wheelbase: 185mm; wheelbase: 188mm; wheel diameter: 85mm;
Differential Structure: planetary gear differential
Frequency: 2.4GHz (support multiple cars to compete in the same field)
Remote Control Category: full scale synchronous control system (gun control)
ESC/Receiver: 35A ESC/Receiver integrated control (splash-proof)
Speed: 70 km/h (top speed)
Lighting Configuration: LED headlights
Protection Function: 1. Charging; 2. Stuck; 3. High temperature; 4. Low voltage
BE SURE TO LIKE 👍 & SUBSCRIBE & CLICK that Notification 🔔 so you don't miss an Episode. The Support you give to growing this Channel is Much Appreciated & enables me to make further RC Content for you Guys/Gals on a Weekly Basis! Also Purchasing from the Product Links Above also help Support the Channel Greatly at NO EXTRA COST to you!
FOLLOW MY OTHER SOCIAL MEDIA LINKS! 😎👍
You can Now Follow me on Facebook here
/ perthwestozrc
Instagram here www.instagram....
TWITTER / perthwestoz_rc
Tumblr www.tumblr.com...
Check out some of my NEW PWOZRC Channel Merch here at TeeSpring teespring.com/...
If you would like me to review any of your RC products on this channel, contact me here via email 1991v8soarer@gmail.com or message me direct on my PWOZRC Facebook page link above
SCY 16103 GANTRY PRO
#SCY16103 #GantryPro #rctrucks 
Развлечения
![FendiDa Rappa - Clock Dat ft. Shamar Marco [Official Music Video]](http://i.ytimg.com/vi/3NBU8KHdxYY/mqdefault.jpg)
SCY 16103 GANTRY PRO Available here bit.ly/3ZuXgxF
11.1V 2000mAh 25C 3S Battery T Plug for SCY 16103 Pro Car
bit.ly/3ivBN7d Use Code PERTHWESTOZRC for extra discounts on all listing
This jeep absolutely screams!! So fast. Seems like an amazing deal for $100!
It's a fun little Jeep to bash around, cheers for watching Ryan
Nice one mate. Got one in red. Excellent review 👏
Good choice man! These are awesome little trucks. It went mad on the dunes with the paddle tyres in that video i made shortly after this review 😎👍
_Just received this monster it really is a blast_ ~ *great review*
Thanks bro, I made a follow up vid in the sand dunes, it's awesome! One of my all time fave 16th scaled RC
Interestingly, US Amazon has one advertised with oil shocks but at $130. Getting from makerfire and add oil shocks would be a better deal for now
Good basher and very nice driving Dave.
Always appreciate you watching Greg, have a great evening and weekend brother
Great video thanks for the discount code just ordered one with the 3s lipo and paddle wheels.
Nice mate enjoy! it's a fun and quick little truck👍
🇮🇪 very cool monster truck brilliant driving
Thanks for watching John
Great review and run Dave not a bad rc at all
Cheers Will, this brushless Jeep is a fun little basher 👍
Nice it's like a mini brushless 9204e Jeep 😄
Pretty much but on a smaller scale, thanks for watching Henry 👍
Nice review Dave, not bad for $100 👍🍻
Thanks Dan 👍 its a good little basher
@@PERTHWESTOZRC US$100 or AU$100 ?
I have a PowerHobby 3S 1500mah 45C that fits perfectly in mine....I really need a wheelie bar now! Holy crap! I got the one with metal steering knuckles and have the paddle tires on the way.😁😁😁
Yeah these are mental on 3s hey 🤣👍
Could you please measure the shell for me, if it wouldn’t be too much trouble? I have another truck I’d love to put this on but want to know approximately how big it is.
@@kendallwilliams8135 It's 4-1/2" X 11". The lights are extremely bright.
@@roderickrayrutledge2740thank you so much! Have a good day
Rip out the esc/receiver combo, slip a 45a 3s capable esc, your personal choice of receiver, and it will really come to life.. and so far, 10hours approx 30+ 3s running and it’s all still working. Obviously this will void any warranty, so do so at your own risk. But it’ll make an excellent puddle jumper….
Have you got a link for a 3s that will fit in the battery slot?
Can u send me the info so I can order that set up ? 🙏
How's it going so far
Just ordered one for 80€, hope it's good.
It's good, you'll like it, check out how fast it is in one of my recent videos from last week! Also I have a video in the sand dunes on paddle tyres... it rips! Cheers for watching 👍🏻
Awesome unboxing 👏😍
I love my Gantry Pro Jeep. I was out the other day running it in the snow with the paddle tires and it was a blast!! It made great rooster tails of snow when you are hitting the throttle! I put the clips on the shocks to stiffen them up a bit and they seem to work well for me. I am trying to decide if hydraulic shocks on these small cars are just too stiff for the weight of the car and instead of compressing the shock they just flip over in a turn or bounce over rough terrain because the model is too light to compress the hydraulic shocks. I notice with the compression spring shocks compared to hydraulic shocks you can see the wheels going up and down and the body stays flat with the terrain instead of bouncing over it. What do you guys think?
I like it so much that I bought a back up pro model and a white brushed model just because I wanted the white shell and the rest will be used for parts.
Hey Dave, Nice basher, cheap price. Add some oil shocks and you've got yourself I decent Jeep. :)
Yep for sure James, just needs decent shocks which are a cheap upgrade. Thanks for watching and have a great weekend.
do you know what metal servo saver I want to take for the scy 16103? Thank
Amazing video! Can I dip it in water to wash it after a run on the sand at the beach? Hug from Brazil 🇧🇷
Thanks for watching, if you want to wash the car, I would suggest not to rinse it in salt water at the beach bit fresh tap water at home. Salt water will make it rust
@@PERTHWESTOZRC Excellent! I want to wash with tap water at home. but I was worried about damaging it with water. Good to know he can handle it, so it's easier to get all the sand out.
What’s the app called
Hey so i got one, but fit wont pair with the remote? Can you help me troubleshoot mine?
I hope i can get some help here. Just got one this week, turned it on, servo turned the wheels only slightly, rear wheels spun, then everything stopped. After about 20 minutes, plugged everything in steering doesn't work. Rear wheels ran for 30 seconds, dead again. Tried everything. Am i doing something wrong?
Also the light on my controller isn't blinking.
Nice video! 3S top speed?
Hello, mine is going full throttle without pressing the remote, sometimes when i press the the middle invertir button. Do you thini its the esc or the remote ? Thank you
Hard to say it could be either one really!
@@PERTHWESTOZRC thank you dude. So if i change both, do i have to setup the new ESC (throttle, break, lights)?
Hey mines goes on its own. I think the controller needs calibrated but can’t find any videos on how to do it 👎🏼
It's probably an esc issue as well, these are calibrated and bound from the factory and have a 2 in 1 board so I'd say they'd be impossible to calibrate anyway. Maybe buy a new standard esc receiver for it, most likely the don't cost much or buy a proper independent esc and run it on a different transmitter and receiver, like a Dumbo RC
hello perth what is the difference with the 16101 pro that is also brushless, is it possible that it only changes the body and wheels? Is it a good car for jumping? thanks perth.
Yeah i think the only difference is the body shell and wheels, and yes it jumps pretty good, go watch my sand dune bash video i made shortly after this review if you like where i try the paddle tyres, this little Jeep is insanely fun! 😆 Thanks for watching
What is this another rebrand of with regards to parts availability? Looks a little familiar
It's not a rebrand of anything, this RC is made by SuChiYu and parts are available on Aliexpress
@@PERTHWESTOZRC as I watched the video it came up in ali. I had it on my wishlist 😅
Least I know why it looks familiar
you can control the speed on the trigge? i mean if i want go realy slow to cross some obstacles?
Yes its fully proportional controls
Great video mate , do you know if anyone in Perth have these off the shelf ?? Cheers, Simon perth wa
Hi Simon, cheers for watching mate 👍 As far as local sellers of this rc truck, unless your local hobby shop has it in stock which i doubt, the only way you can buy one of these is online
is die kar waterdig?
Hey check it out- it'll cross a pond!! But we do NOT recommend you do it, because it would take 3s, and it's only a 2s machine. - 🙈🙈 that plus friction dampers on a pro model = Epic Failure. However, the VIDEO IS GREAT AS ALWAYS‼️👍👍🦾🦾
What i was impressed with in the two makerfire videos, (I have them linked in the description) is that the esc and all the electronics seem to be 100% waterproof after when the truck is submerged under the water. Thanks for watching bro 👍
It is soo fast!!!
Sure Is! Thanks for watching 🙂
Brushed version is 60 bucks on Amazon
Yeah think thats the going price for brushed, but the brushed model does not have metal parts in the drive train gearing or axles.. its all plastic.
@@PERTHWESTOZRC I’d not heard of these til now. Seems like a solid little basher for the money
if only it had oil shocks it would be much better
Yep for sure but at least its only a cheap fix to upgrade to oil filled ones, cheers for watching 👍
Oh I thought the brushless comes with oiled shocks
No still friction shocks, i show it on the bench and mention it during the drive test. i used the C clip tension rings that came with the accessory bag to help stiffen em up a little
@@PERTHWESTOZRC i bet the hbx 16889 0r the redcat volcano 16 or eachine 16th buggy oil shocks would fit right on there it would make a killer little jeep i love the looks of it but friction shocks are a no no lol thanks for sharing bro
EXACTLY. There are so many options now that we don't have to deal with changing out the shocks. The bouncy friction shocks need to be gone, unless it is only for a young child/ toddler.
All they needed is some WL like oil shocks, they'd triple the sales quickly. Oh well, have fun!
3S👌=75KM
Do you have a link for a 3s that will fit in the battery slot?
Not good for 3s 😂😂😂
looks pretty rubbish off road to me, i'd be turning it into a street basher, looked way more fun on the road, it could barely drive in the leaves lol, but it has no suspension though so that might help i'll have to get one and mess with it, it's not rubbish totally, a lot of people shoot these cheap trucks down all the time, but they 100% have a place in the market, i think it gets people interested, mom goes online to buy a rc truck, and sees the prices on them and shits her pants, but this one is 100$ 31 miles an hour is plenty fun for bashing, more just makes it impossible to drive and you break more stuff when you hit something at 50 miles an hour (plus batteries cost in the hundreds of dollars so it's just silly to me)
Go watch my 2nd video on this in the sand dunes with paddle tyres, i installed oil filled shocks from a 144001. It's a fun basher off road with more than enough power
So tiny but good for kids getting into the hobby I guess
Yes for sure man, cheers for watching 👍