LEGO® Speed Champions McLaren Solus GT and McLaren F1 LM (76918)[581 pcs] Instructions | TBB

Поделиться
HTML-код
  • Опубликовано: 23 дек 2024
  • ХоббиХобби

Комментарии • 40

  • @keithlewis4250
    @keithlewis4250 Год назад +6

    I just built these cars they would never survive another impact with another Lego car. Even with the reinforcing parts i put on it to stop the front section falling apart in my hands.The front lower spoiler should have benn a single solid piece instead of 3 the 2 flat pieces along the doors i had to put a 1x2 flat to keep them from falling apart in several places inside the cars you had 2 pieces when a single solid piece would have been better.

    • @TopBrickBuilder
      @TopBrickBuilder  Год назад

      This problem is almost for all Speed Champions sets... Very fragile confections...

    • @Bobbybats4295
      @Bobbybats4295 Год назад

      Why would you expect that from a 8 stud wide car like they place focus in quality and design not strength and resistance. It makes the build way better that way.

  • @dimpersx1211
    @dimpersx1211 5 месяцев назад +1

    Heyy ,so i build the solus yesterday but the 2 black pieces that hold the wing in place are for some reason not able to be straight,did i do something wrong or is it this way .Also the wing is easily removable is that normal ?Havent had this problem before

    • @TopBrickBuilder
      @TopBrickBuilder  5 месяцев назад

      The wing should fit straight, check if you've installed these two black pieces right 8:41

    • @dimpersx1211
      @dimpersx1211 5 месяцев назад +1

      ​@@TopBrickBuilderYeah ,so these pieces are sitting a bit weird because of the pieces underneath.The wing is sitting straight but the pieces are not completely straight.Should it be like that ?Thanksss

    • @TopBrickBuilder
      @TopBrickBuilder  5 месяцев назад

      Can't say for sure, but maybe you can take some pics and send them on my Instagram or Facebook too take a look at your wing 😉

    • @dimpersx1211
      @dimpersx1211 5 месяцев назад +1

      @@TopBrickBuilderOkay thanks!

  • @lizcaraballo7670
    @lizcaraballo7670 2 месяца назад +1

    For the first car idk why but when I try to put the windshield on it does not fit. Any tips? I've gone over the instructions and even watching this video I cannot figure out where I went wrong.

    • @TopBrickBuilder
      @TopBrickBuilder  2 месяца назад

      Hmm, that's weird, but I can't know for sure what's the problem in your case, could you take some pics and send them to my Instagram or Facebook? And I will look at your problem closely

    • @crman3816
      @crman3816 Месяц назад +1

      I had the same problem

    • @lizcaraballo7670
      @lizcaraballo7670 Месяц назад +1

      @@crman3816 I'm not sure if you have the same problem but I figured out what I was doing wrong. There is an engine looking piece (or a piece that has a sticker that looks like an engine looking piece) connected to the steering wheel. It should align exactly as shown on the picture. Mines was too high which did not connect to the windshield properly. Mines needed to be pushed down in order for the pieces to align, perhaps this is the same issue your facing. I recommend looking at the front piece of the car and making sure all the pieces align properly, this should fix the issue. Best of luck! ☺️

    • @crman3816
      @crman3816 27 дней назад +1

      @@lizcaraballo7670 Yea actually I figured out what I did wrong in the next 2 minutes or so

  • @tokiiorie_
    @tokiiorie_ Год назад +3

    Hey you know the buggati bolide video, can you please look at the comments section there please. Thank you

    • @TopBrickBuilder
      @TopBrickBuilder  Год назад +1

      Hi, i have responded to your question, check it out at Bugatti Bolide video.

    • @tokiiorie_
      @tokiiorie_ Год назад +1

      I ordered the piece but they canceled the order

    • @TopBrickBuilder
      @TopBrickBuilder  Год назад +1

      Hmm, but why? Have you got a response?

    • @tokiiorie_
      @tokiiorie_ Год назад +2

      Yep

    • @tokiiorie_
      @tokiiorie_ Год назад +2

      They sent me an email

  • @toshiadixon4480
    @toshiadixon4480 Год назад +2

    13:23

  • @petermassura9348
    @petermassura9348 Год назад

    Where did that black frame piece come from, I can’t find it in my box.

    • @TopBrickBuilder
      @TopBrickBuilder  Год назад

      You mean the piece when I have unboxed the set and it was separate from the bags?

    • @samanthacanales9811
      @samanthacanales9811 6 месяцев назад +1

      So the black separate piece doesn’t come with the box? For 76918?

    • @TopBrickBuilder
      @TopBrickBuilder  6 месяцев назад

      It does! But some of people have missed that part from the box 😪

  •  7 месяцев назад +1

    Thanks, this really helped me out.

    • @TopBrickBuilder
      @TopBrickBuilder  6 месяцев назад

      Glad to hear it! Thanks for your feedback! 🤘

  • @rednecktwins1862
    @rednecktwins1862 Год назад

    Idk what I’m doing wrong but every time I try to put on the sloped pieces at the front orange mclaren it won’t go on the way in the video I’ve looked over it a lot and it’s not working

    • @TopBrickBuilder
      @TopBrickBuilder  Год назад

      You mean the orange bottom bumper?

    • @Bobbybats4295
      @Bobbybats4295 Год назад +1

      Bro you need to look in the step book they is a specific piece you need to place as the front hood then connect it with thsy since there will be studs point downwards. How'd you struggle with that lower bumper was harder to attach.

  • @Bobbybats4295
    @Bobbybats4295 Год назад +1

    Amazing lego set i like to do mods for sets like these👍👍

  • @SPEEDBrickBuild
    @SPEEDBrickBuild 2 месяца назад +1