In this video, I unbox all of the Bearhawk 4-place Model B kit contents and show in detail what comes with the kit. #Bearhawk #Experimental #homebuilt #kit #airplane
I see the good, bad and ugly in this shipment- mostly good! But bad that they sent without the float package- big miss- and to me those fuel tanks looked scary with oil canning on the rivet job. Did they leak? Thanks for the great detailed video!
Many thanks for this unboxing video. my LSA kit shows up in august, and i’m trying to figure out how much space i need for storage. your video is a big help.
Looking good. Enjoy the build. I found that the wix kit was not very adequate and having extra an3 and an4 hardware in every length through about -20 will speed things up. As well as lots of machine screws. Best of luck. 👍🏼
"Avi Pro" should give you some serious perks, it's nice to see the layout for those who are curious. I like the air-craft but I am not in a position to fly much less own one. Thanks for the vid.
Where in Maine are you? I'm based out of Houlton, KHUL. Would be really interested in seeing your progress sometime and especially interested in seeing your plane once it's completed.
The 5 place is still relatively new. Not many flying yet. I would recommend going to Oshkosh Wisconsin for the airshow. It is amazing and worth it for so many reasons. Stop by the bearhawk booth. Virgil will show you his 5.
I see the good, bad and ugly in this shipment- mostly good! But bad that they sent without the float package- big miss- and to me those fuel tanks looked scary with oil canning on the rivet job. Did they leak? Thanks for the great detailed video!
Great stuff
Consider making videos of your progress
by the looks of it, should only take a couple of hours to put together! 🤣🤣🤣 nicely done Sir!
Look forward to following along with the build!
Quick Build Kit looks great! Looking forward to getting some work in!
Super cool. Thanks for sharing! Good luck!
Barn doors can fly too. I know that because I seen it on RUclips. You do have a nice barn!
Many thanks for this unboxing video. my LSA kit shows up in august, and i’m trying to figure out how much space i need for storage. your video is a big help.
Looking good. Enjoy the build. I found that the wix kit was not very adequate and having extra an3 and an4 hardware in every length through about -20 will speed things up. As well as lots of machine screws. Best of luck. 👍🏼
Thanks for the tip!
Keep the tips comin' as I'm scrolling every video's comments looking for them lol :) Thank you sir!
I used torx drive screws on my cub build, hold up a lot better when removing and re-installing over time
Thanks for the tip!
"Avi Pro" should give you some serious perks, it's nice to see the layout for those who are curious. I like the air-craft but I am not in a position to fly much less own one. Thanks for the vid.
Where in Maine are you? I'm based out of Houlton, KHUL. Would be really interested in seeing your progress sometime and especially interested in seeing your plane once it's completed.
Great video. Waiting on our kit as well. Is this the fast build kit? Good luck and looking forward to watching your build.
Thanks. Yup, it's the quick build kit. We'll see how fast it goes for me!
do you have to ask them to construct some of the parts for you? does it come with instructions?
Thanks for the video! Would be great if you have the time to make build videos!
Thanks for sharing . From new Zealand. What was the cost of all of this? Cheers.
Will you be doing a conventional system like Stewart’s, or something like Oratex?
I like the idea of going light weight and having the paint, for the most part, already done. Likely going to be Oratex.
Any suggestions as to how I can see a Bearhawk 5 in person, talk to a builder, or maybe even get a test ride?
I live in the Long Island, NY area.
The 5 place is still relatively new. Not many flying yet. I would recommend going to Oshkosh Wisconsin for the airshow. It is amazing and worth it for so many reasons. Stop by the bearhawk booth. Virgil will show you his 5.
Where in Maine are you? I run the Northeast STOL Series, we have 3 events here in Maine come check one out.
You can name the plane "Grasshopper"😂
ile taki zestaw kosztuje i gdzie go kupiłeś😃
ikea aviation division
So you order the engine separately
Yup. Engine, prop, Avionics, tires and fabric are all separate
@@barnbuiltbearhawk7267 all sold at separate places?