How To Install & Prime 3M PPS 2.0 H/O Cups To The Bottom of Your Apollo AtomiZer Spray Gun

In this video tutorial, John from Apollo Sprayers will show you step-by-step how to install and prime the 3M PPS system with Apollo AtomiZer spray gun. The 3M PPS system is a paint preparation system that helps reduce the amount of solvent needed during the painting process and the amount of cleanup, which can save you time and money.
First, we will show you how to install the 3M PPS system onto your Apollo AtomiZer spray gun. We will cover how to assemble the disposable cup and liner, attach the adapter to the gun, and attach the cup and liner to the adapter. We will also show you how to properly pour your paint into the cup and liner.
Next, we will demonstrate how to prime the system. We will show you how to pressurize the inside of the cup, allowing the paint to flow freely into the spray gun. We will also show you how to adjust the fluid control knob on the gun while priming the 3M PPS liner.
With this video tutorial, you will have all the information you need to successfully install and prime the 3M PPS system with your Apollo AtomiZer spray gun, and achieve a high-quality paint finish with less waste and downtime.
Check out a tutorial on the installation of a 3M PPS with the gravity feed option: • How To Install & Prime...

[@Kevin-Payne]

How much pressure comes out of the air port of the 7700 going to the pps cup? Is it adjustable?