#CATIAV5
HTML-код
- Опубликовано: 9 сен 2024
- Happy Learning Everyone !
Proud to be an INDIAN designer
======================================================
NACA4412 Aerofoil design in CATIA V5, its a Part 4 and in this designed Ribs of middle wing and trailing edge. Also put an lot of afforts to save command by replicating the deisgns.
======================================================
Previous Videos Link
======================================================
PART 3:: • #CATIAV5 | PART 3 NACA...
PART 2:: • #CATIA V5 | PART2 NACA...
PART 1:: • NACA Series importing ...
SYSTEM SPECIFICATION
Processor - i7 7700 HQ @2.80GHz
RAM - 24GB (DDR4)
Graphics - GEFORCE GTX 1050
Share this video :: • #CATIAV5 PART 4 NACA44...
Magic of Softwares
You are the only person I guess who has made a wing with detail...all others just make the skin of wing and post on RUclips. You did a great job , bro !
Thanks man.. Really appreciated❤
Please share to your colleagues so that they can also learn.
Happy Learning 😇
Share valuable comment
Happy Learning..!
Great video!
🙂 thanks for support
Hi Bro... ur job is good but , how did u make a hole in leading edge rib corner all . u didnot mentioned in this video including all parts
so pls explain that again pls... I want clear explain that
You can take reference from middle rib hole and cut downs that have made in this video.
1) It's so basic, I hope you are learning🙂, if you still want a precise how to do it...
Go on Grabcad Site, you can find the link (logo) on my RUclips banner, download the part and check for it
2) if still facing issue mail me at vishalpatil910087@gmail.com
I'll resolve your issue
Hi, is there any textbook or contents you used to design this wing. Like location and thickness of spar, rib etc?
Nope it's all just assumptions
Hello Magic of Design Software! These tutorial series are absolutely fantastic and a very good guide to wing design. Please, I'd need you to show/explain how to restore the root airfoil at the start of the Trailing Rib design integration on 19:47 of the video. I'm stuck at this point because in my follow-through design it's not visible anymore. Thanks!
Please mail me at vishalpatil910087@gmail.com with a screenshot and description.. In video it's clear the next steps.., thanks for your kind words and support!
@@magicofdesignsoftware4079 OK, I'll get in touch. Thanks.
Hello @Magic of Design Softwares ... You did absolutely fantastic and great job ... I am stuck in mid rib 6 with the following error "A skin does not cut right across one of the volume: the split cannot be computed.". Can you please help me out ?
1) I recommend you to too delete the ribs section and do again
2) select the dimensions carefully, it must be dimensional error as skin.
3) check the Tree, what commands you have applied.
4) if still won't resolve the problem mail me at vishalpatil910087@gmail.com
5) download the wing file from Grabcad site as to cross check with your present file. You can get the link from my banner.
Happy Learning it's great of you to put efforts in designing. Really appreciated. 🙂
Bro how can we design swept back wing with spars and ribs
Sure man,
Why not.. Just go through my videos of previous, there you can find the stuffs of spars and ribs. I made seperate video of swept back wing
Design Accordingly
Happy Learning ☺
@@magicofdesignsoftware4079 bro is this wing is a swept back wing??
Please can you share me the data /parameters of this complete wing
ruclips.net/video/9wfBEXMArvU/видео.html
This is swept back wing..
You can make sparrs, ribs and stringers in it.
By following the video which you are currently looking.
@@magicofdesignsoftware4079 thanks bro
Can I do this with RAE2822 airfoil for B787 following your videos ?
Yes you can
Hi, just seen this video. I am only trying to use a wing-box for analysis, so from the spars to the leading/trailling edge need to be removed, so it essentially looks like a box. How can i do this? Thank you.
Sorry, Can't answer that really! Mail me the incident we'll look in to it during screen share session. Thanks!
@@magicofdesignsoftware4079 Perfect. I have sent you an email regarding my project, looking forward to working with you,
What is the dimension of the cavity (where front spar and leading edge meet) at the very start of video ?
Can you please elaborate and give proper Timing of it! I can surely help 🙂
@@magicofdesignsoftware4079 00:53
Breadth is 28mm and length of inner aerofoil only matters so the distance between point and below line is 12 mm
Follow video with subtitle and sound....!
Happy Learning 😇!
Get me on grabcad for this design! On my channel banner you can get the link to grabcad
@@magicofdesignsoftware4079 Thanks dude !
Please share if found my content valuable.! Happy Learning😇
have you finished design of aircraft wing serie or it will continue ?
Yes, Its complete one !
futher Im adding to this topic a Fuselage!
Happy Learing !
Suggest some topics that you want me to make !
@@magicofdesignsoftware4079 I need fuselage also . I am waiting for your new videos.
@@royalmammadov4688 yes surely tomorrow ! At 5 PM
Happy Learning.. ! 🙂 please do share my content if found worthy..!
I have a question ...this wing design would be easier as an assembly or as part design ?
Well it can be! But I think in part design it is an easy approach as alignment and positioning matters here..!
There is always a Macintosh for every Microsoft😅!
Explore new ideas and approach will always bring new things in reality.!
You go for it if you make the one! Send to me also 😇
Happy Learning dear
@@magicofdesignsoftware4079 I thing not many things will change. You just need to mate or align components. Assembly will be more fun than part but I need a tutorial fr that. Anyway, Thanks
Ok so I'll make one for you!
Assembly of it! Let's give a try
Looking forward to it
sir we need a file of the catia of this model can you please attach it
You can have it from Grab Cad Site, I have uploaded there..
Check my Channel Banner there is icon of it..click on it. It will redirect you to Grab Cad site
Bro I can't copy the middle rib to the next plane it is showing red colour what to do
Delete the Rib make it again. It must be some step error. Follow steps carefully and try to avoid arbitrary inputs.
Rest you can find this wing at my GrabCad account.
Happy Learning
@@magicofdesignsoftware4079 I did twice seeing the video carefully
Check the dimensions.
Download from the Grab Cad Site. On channel banner you can find the Icon of it.
I'm on vacations, so brother can't help. Mail me on 8th December. That time I will surely help you.
Happy Learning. 🙂
Can I get grabcad design link of yours
Check on Channel banner there is icon click on it.. And you will land on Grab Cad Site.
How can we put holes in the Ribs?
Watch video again once you will get an idea.
1) make a circle on the rib.
2) make cavity then use pattern.
Sir could you please provide this cad file?
At Channel's cover page there is a icon of grabcad site you can download it from there all the designs are present there, thanks!
Happy Learning
Can u share me this design in my mail? As for my last trailing edge rib i m getting wrong as shell function is not working
On my Channel's banner, there is an icon of grabcad site.. There can find my design and download it.. It's simple as it seems like..!
Happy Learning 😇☺
@@magicofdesignsoftware4079 Thanks bro