Nice simple repair, and you are correct about not wrenching too hard on that bolt. I made sure to douche it good with pb blaster first, and used a 1/4in drive ratchet; now the sensor won't come out so I can clean the rust from knuckle before replacing the bearing. May just have to waste the sensor and get a new one. Ty.
Hi Dave, have you done anything with a brake pressure sensor at all, I've got abs, traction control and tyre pressure lights on but 1 of the codes coming up is 01435, g201
Thanks for posting . Now I know what's wrong with mine. I put new ABS sensor it fixed it for a few days and now the light is back on :) . I found a video where they sell a kit to replace the sensor , the bolts and the magnetic ring only, not the hole hub . Is it a good idea ?
REALLY useful that dave, got a ABS/ESP light on my 2010 180000k skoda superb, changed the REAR sensor (old 1 had identical) groove in it as yours did, put new sensor in and fault is still on dash, suppose it`s got to be a wheel bearing next ??????
Great video! I’ve just fitted this myself. Is there anyway of clearing the ABS and traction control lights on the dash without plugging it into a computer? I guess I could pop to a local garage and ask if they can clear them, but some garages get funny and won’t take any liability and won’t help you..
I have a 2006 Jetta TDI Manual MK5 and I broke my ABS sensor off when replacing my wheel bearing. The hole that the sensor goes in is quite corroded and I can't get the remainder of the sensor out. Is there anyway to do it without removing the wheel bearing again? I have to borrow the triple square to remove it and I'm worried they'll strip (2 stripped during the removal of the old one and I ended up having to cut the old bearing off with a grinder.).
I sent my mk5 GTI to get wheel bearing replaced and now my traction control and abs light is on is that something they could have damaged during the change?
Find the items that are used on the Dave Sterl channel in the Amazon shop.
Nice simple repair, and you are correct about not wrenching too hard on that bolt. I made sure to douche it good with pb blaster first, and used a 1/4in drive ratchet; now the sensor won't come out so I can clean the rust from knuckle before replacing the bearing. May just have to waste the sensor and get a new one. Ty.
Explained & diagnosed in professionally manners. 👍🏻
Nice job and well explained diagnostics and repair, 5 stars mate.
Great video!
Great video
thanks for this.
Love your videos Dave,its nice to watch a norniron man on here👍 can I ask...what type of blue tooth diagnostic machine do yo use?
Hi Dave, have you done anything with a brake pressure sensor at all, I've got abs, traction control and tyre pressure lights on but 1 of the codes coming up is 01435, g201
Thanks for posting . Now I know what's wrong with mine. I put new ABS sensor it fixed it for a few days and now the light is back on :) . I found a video where they sell a kit to replace the sensor , the bolts and the magnetic ring only, not the hole hub . Is it a good idea ?
Dave are crafter wheel speed sensors the same system as this??
hi what size are the new alen nuts u use ta
awesome video....can i ask...where can i get one of those tools to check the magnetic teeth....
REALLY useful that dave, got a ABS/ESP light on my 2010 180000k skoda superb, changed the REAR sensor (old 1 had identical) groove in it as yours did, put new sensor in and fault is still on dash, suppose it`s got to be a wheel bearing next ??????
Great video! I’ve just fitted this myself. Is there anyway of clearing the ABS and traction control lights on the dash without plugging it into a computer? I guess I could pop to a local garage and ask if they can clear them, but some garages get funny and won’t take any liability and won’t help you..
I have a 2006 Jetta TDI Manual MK5 and I broke my ABS sensor off when replacing my wheel bearing. The hole that the sensor goes in is quite corroded and I can't get the remainder of the sensor out. Is there anyway to do it without removing the wheel bearing again? I have to borrow the triple square to remove it and I'm worried they'll strip (2 stripped during the removal of the old one and I ended up having to cut the old bearing off with a grinder.).
Good video mate. What’s the scan tool name??
Just got a mk5 gti. Both my abs and traction control lights are on. My esc switch is saying it’s off any suggestions?
👍
I sent my mk5 GTI to get wheel bearing replaced and now my traction control and abs light is on is that something they could have damaged during the change?