Just put these on yesterday. Have not been able to test them at night yet but I will say that bolt holding the fender and shroud together was a pain in my ass!
this is bananas because I just started following you like a week ago and I've had these lights in my Amazon cart for four days lol. Now I know I can go ahead and pull the trigger, thanks man!
@hunterdan2002 What year is your 4th gen? I put a set of AlphaRex on my wife's 2014 and it threw the light out code. Hoping these have the software so it doesn't throw a code for the older trucks because I would like to upgrade hers but not if its still going to throw a code.
@@jarrettroseboom2602 mine is a 2019 classic. I had alpharex and could never get rid of the error codes 100%. I got it close. But one for the parking light would pop up randomly once every few days. I've used alfaobd to enable led everything, and bixenon headlamps. So far, no codes have popped up.
Those are definitely great headlights, you’ll really like them. I got them when they were still made by Vland before Form lighting bought them in the US. They’re just as good as OEM if not better.
I haven’t compared them to my dad’s limited yet, but it’s a moot point because these don’t fit the limiteds as they have skinnier headlights. The forms only fit the Rebel, Laramie, and big horn trims.
@@WaterFowler41 for sure, I was just wondering more how the whiteness/brightness stands up to the stock on those. Looking at them for my Laramie and seems like they are worth the upgrade either way
Just installed these form lights and they are not focused correctly and I tried adjusting them and they won’t adjust total bull shit on these damn lights.
@camronbay1 I had this issue too. There are two bolts. One towards the top pivots the triple projectors and one on the bottom part of the headlights when installed adjusts the height.
@@iLLbiLLkiLLs Form told me the top one is for the height adjustment and the bottom one is for side adjustment and not to adjust this one because it’s calibrated with a computer I wish they would put this in the instructions.
@@camronbay1yes they sent me a diagram saying this same thing and they're wrong or this headlight in the diagram is upside down. I played with them both for some time to get them leveled out. It's definitely the bottom ones that adjust the height for sure. I just went out and tested it.
I recently installed these went from OEM led to these did you get any turn signal errors? And did you plug up the purple wire cause I saw another video where they didn’t
Just put these on yesterday. Have not been able to test them at night yet but I will say that bolt holding the fender and shroud together was a pain in my ass!
These lights just arrived! I can’t wait to put them in this weekend!
this is bananas because I just started following you like a week ago and I've had these lights in my Amazon cart for four days lol. Now I know I can go ahead and pull the trigger, thanks man!
Like Gwen Stefani once said, “this shit is bananas, B A N A N A S!”
Great video as usual brother. Love mines!
I'm currently testing a set of form lights for the 4th gen Ram. So far, I'm impressed.
@hunterdan2002 What year is your 4th gen? I put a set of AlphaRex on my wife's 2014 and it threw the light out code. Hoping these have the software so it doesn't throw a code for the older trucks because I would like to upgrade hers but not if its still going to throw a code.
@@jarrettroseboom2602 mine is a 2019 classic. I had alpharex and could never get rid of the error codes 100%. I got it close. But one for the parking light would pop up randomly once every few days. I've used alfaobd to enable led everything, and bixenon headlamps. So far, no codes have popped up.
Those are definitely great headlights, you’ll really like them. I got them when they were still made by Vland before Form lighting bought them in the US. They’re just as good as OEM if not better.
OH Form bought VLand and now they are being made in the states? Now I'm more interested.
@jarrettroseboom2602 quality control is 🆙
@@jarrettroseboom2602all form lighting stuff is made by VLAND. They just have a partnership and Form Lighting is owned by diode dynamics.
Wow - big difference. Good editing. Shingles suck.
Did you adjust the height of the headlight using the bottom or top screw? Some people are saying the labels are reversed with the adjustment screw?
I did but it was so long ago I don't recall the adjustment screw I used.
These lights look very good.
Have you ever considered adding 360 surround system? Blind Spot andcAdaptive Cruise control
No too much additional wiring, doesn’t seem worth it
I was hoping you would a detailed install on 360 etc because your videos are the best Rebel videos
Thanks!
Great video! Thank you! Do Rebel and Laramie have the same headlights?
If they are LEDs then yes, they do.
Hi! Are you still satisfied with the lights?
Yes I am!
Have you seen how these compare to the stock limited trim projectors?
I haven’t compared them to my dad’s limited yet, but it’s a moot point because these don’t fit the limiteds as they have skinnier headlights. The forms only fit the Rebel, Laramie, and big horn trims.
@@WaterFowler41 for sure, I was just wondering more how the whiteness/brightness stands up to the stock on those. Looking at them for my Laramie and seems like they are worth the upgrade either way
@mikeyx2415 I’d definitely go with form!
Just installed these form lights and they are not focused correctly and I tried adjusting them and they won’t adjust total bull shit on these damn lights.
Bummer, I'd give the Form folks a call. Mine just needed to be adjusted a tad to account for my ride height.
You may be spinning the wrong bolts. There are two sets. Ones on top pivot the projectors. The bolts toward the bottom adjust the height
@@iLLbiLLkiLLs Did your lights come with instructions.
Did you have to adjust your lights after the installation.
A smidge to ensure I was putting the light where I wanted it, very easy to adjust the height with the alignment bolt on the back of the light.
@@WaterFowler41 I tried that and the bolt moves but the lights will not adjust I think they are broken.
@camronbay1 I had this issue too. There are two bolts. One towards the top pivots the triple projectors and one on the bottom part of the headlights when installed adjusts the height.
@@iLLbiLLkiLLs Form told me the top one is for the height adjustment and the bottom one is for side adjustment and not to adjust this one because it’s calibrated with a computer I wish they would put this in the instructions.
@@camronbay1yes they sent me a diagram saying this same thing and they're wrong or this headlight in the diagram is upside down. I played with them both for some time to get them leveled out. It's definitely the bottom ones that adjust the height for sure. I just went out and tested it.
Did any codes pop up after installation?
Nope!
@@WaterFowler41 thank you for the response and the video. Just subbed 💯
I recently installed these went from OEM led to these did you get any turn signal errors? And did you plug up the purple wire cause I saw another video where they didn’t