Knife Making - How To Make A Knife
HTML-код
- Опубликовано: 11 сен 2017
- Handmade custom knife from hardened steel, with bog oak handle. There I try to explain all steps involved in video of creation this knife.
----------------------------------------------------------------------------------------------
If you like video - 'Knife Making - How To Make A Knife'
• Knife Making - How To ...
Subscribe on my channel:
/ koss-channel
----------------------------------------------------------------------------------------------
/ koss_workshop
/ kossworkshop Хобби
Why reuploading?
Audio track experiments, now it with sounds of tools and music =)
please comments how's better, tools sounds or music, or both maybe?
Koss You should have a bit higher music
Just a suggestion; put that in the title or description. I thought you made another knife, others may think you're doing it "for the views". I might be wrong but better be safe than sorry.
Koss As for me, it better watch with music only. Or just reduce tools sounds.
I like both, to be honest. What I would appreciate is a list of the music you used in your videos, though!
Nice finished product. The brass and handle material look great.
clever use of oak charcoal, very nice piece and thanks for sharing
Love your work, beautiful knife, reminds me of my pop's knife he used to carry when I was a kid.
Прикольный клинок, ручка просто офигительная по красоте и текстуре дерева, чёрная в сочетании с латунью просто бомба, респект и уважение мастеру!!!😊😉😄😃😀👏🖒👍👌💪🏅🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺
Great work and excellent result. Keep it up!
That is a very, very good looking knife. Congratz
that bog oak wood looks so good !
Beatiful vídeo,beatiful knife.
This is very beautiful knife.
Наклонный больстер придает стремительности ножу, классно смотрится. Нож хорош.
Good job. Bravo.
SO awesome dude, and ur bandsaw, selfbuild? Fabulous!
That's a beautiful knife. I want it!! :)
Just gorgeous
Отличная работа!👍
Aren't those sharp corners at the tang a stress point allowing it to snap easily? Beautiful piece though
Beautiful knife, perfect video! :)
Parabéns, belo trabalho.
How do you match your bevels with the grinding jig you made? A straight plunge line is somewhat easy, but the angled plunge lines is what I'm curious about.
Q BUEN ACABADO UN GRAN TRABAJO
สวยงามสวยสดุ้ง
wow! sounds perfect. nice khife, i'd like to buy one of your knives
Great demonstration video...
Sorry you have so many haters in the comments...
Your title says it all... How to make a knife...concise and clear...thanks for sharing...
Nice Knife man
that is spectacular
A bunch of work but for a good reason. Great.
Nice! Very pretty.
Is there a reason you didn’t use corby bolts or pins to help secure the handle to the tang?
Шикарен!
That is awesome! ❤️
Чудова робота 🤝✊✊✊💪💪💪
Тоже хочу таким заниматься!!!
If you can put a price on it, i will be more than exited to consider buying it. I absolutely love your work and quality and i would be honoured to own one of your pieces.
简洁漂亮
I love the angles of the brass pieces and the contrast with the lighter wood. From a utilitarian perspective I would have elongate the finger guard, had too many accidental cuts from slipping off the handle in wet conditions.
Que grano de lija usas para la lijadora de banda?
What sanding grain do you use for the belt sander?
Nice....i like it...from indonesia🇮🇩🇮🇩
I am half Indonesia and half Dutch
9:26 Holy finger scare, Batman!
I really enjoy your videos.
sieht gut aus ein schönes Messer
On the belt grinder which grain you used for the blade and the handle? And to sand brass by hand?
Hello, nice videos.
Thanks th share.
I have a question:
When you make the bevel on the knife, place it at a 45 degree angle on the jig. What is the reason.
I'm new to knives and I've had a lot of trouble making bevel on knives.
beautifulo knife +++ and good work, what Wood and what oil fo finishing, Tank you
Is it bog oak for the handle? By the way Wonderful Knife.
I ilke the handle shaping...
What kind of belt grinder do you have?
Hi koss what knife template did you use and would you be able to send it to me?
what is that liquid for shading blade ?
What kind of wood is the red in between the brass
Увы обоснованный минус трещина на ручке.
Nice blade, hard to work with pre hardened steel but always doable, I always worry about the hardness afterwards.
I like the handle but that split worries me, it probably only showed up as you went, I wonder if you could fill it with expoy that is mixed with sawdust from that wood? Perhaps remove a section of the area around the split? Even run some brass pins though and fill with the mentioned epoxy?
Anyway nice blade, I think you learn as much by watching as listening, I enjoyed the vid.
The Split or creak dohnt Look so Bad in it but i Love the Blade becose it Looks elegante is Not so an Hand Axe
Hi Koss, nice knife that you make. How much did you want for such a one? Greetings from Germany
No music. The tools, sanding and such is the music.
what kind of wood is he using
Just a question: what is the liquid that make the balde black? Thanks for your answer!!
Ivan Choposvkyi thank you so so much!
Ciao. Con cosa "colori" la lama???
B-bello!
Great build but I would pass on purchasing due to the obvious giant gash on bottom edge of handle. Nice work however
Nice balance of workshop to music! So many videos blast you out with their taste in music that you have to mute them just to watch
Зачтено
Where do you get your metal
Hey, amazing knive!!
One of the best i saw on youtube so far :)
2 things:
1. i like the version like this with tool sounds more ;)
2. what are you doing at 10:00? Vinegar?
Greetings
andimayermayer Pretty sure it's iron chloride
I got idea to make knife like this except with buffalo horn as handle with copper ring
на гриндере какой мощности движок?
@koss how do you make your templates for knife making!!?? I wanna get into knife making but I don’t know where to get a template!!
Besides searching for some, and looking at Pinterest, i really do suggest you try on your own. Beginning with your own imagination, and learn from the output. Indulge in your OWN creation
amiel seth thank you bro!
Where do you get your billets?
Do u sell them? How can I buy one???
sounds of tools and music is better ;)
PLEASE LINK THE TEMPLATE!!! I cant find one similar!!!
👍👍👍👍
What type of steel. Pls
Сколько дней делал?
Красиво, но трещина в ручке все портит!
what is glue name ?
Hi, I'd like to ask about ur hardening process
He said in the video description that he is using per hardened steel to make this knife so he has to be careful to not overheat the steel.
Whats that oil stuff he has in the bottle?
I believe it is iron chloride
no entieno como dejas la empuñadura rajada, muy mal
Do yo sell that knife?
what kind of wood used?
Bog oak
100%OK
Why would you make a rat tail?
Omg can you make one for sell
🖒🖒🖒😎😎😎
knife template ???
No templed?????
Как можна заказать отличный робота
what is the song at the end of the video?
Darude - Sandstorm
What if you make a file from a knife?
Laundry Sauce what if you file a make from a knife?
Ручку сбивать и переделывать, трещина, да еще с выходом на торец - рванет рано или поздно. По тех.процессу - много лишних операций.
LOL...a wooden bandsaw. Nice,
10:08 Is that ferric chloride?
yes
No heat treated??
"60HRC" is literally the first thing you see when the video starts
Работа ради работы
Templed yes o no?
What liquid is in the bottle?
Ferric chloride, judging from the colour. Likely diluted with water.
.
Cool I won't 1
hitachi uchiha
10:30 what is this ?
Ferric chloride (FeCl3)
No music please.