I know remolding a runner seems excessive, but I think it's a good demonstration on the actual costs of developing a new mold. Plastic pellets are super cheap, though there are also additional hidden costs in logistics when the box size goes up.
Huh? I thought Bandai can separate their mold based on a design they created. The desogn of a mobile suit and some of it upgraded is created months before the mold was made? And they highlights the parts where you need a duplicate or reuse for the upgraded form, and they can separate the same mold into more mold?
@@tonythong5352 Indeed, channel switches are a unique feature to Bandai's molds which allows them to occlude parts from runners to either reduce replication or distinguish products. However, they must be implemented when the runner is created and cannot be added post-hoc. They also add cost to production, so they're only added where they're deemed necessary. The Shining Break wasn't incepted when they were laying out the Shining Gundam's runners, so there are no switches to accommodate the design.
@@eisenklad you can actually do the reverse with this kit! mount the guns in the shields like in its transformed mode and then have it hold the Beam sabers.
They're definitely not charging you proportionally for those parts lol. It's what, 200 yen more for almost double the plastic (most of which is completely usable) of the original Shining Gundam? Sounds like a pretty good deal.
Otonashi yeah. If only you gonna use it and in my case im not even gonna touch it. So basically bandai just charge you for s#!+. Once you snap all together you just gonna put it on display and never touch it again. So thet extra part is just ridiculous.
@@travisstryder216 I'd say the base gundam alone should be 200 yen more anyway, since it seems to use more plastic in its construction than the Shining Gundam even before the leftover parts. And if you're basically getting a bunch of plastic for no real extra charge, what's the harm?
Personally this looks to be a fun kit from the leftovers alone. I plan on merging them onto a guard frame somehow and make an even more ridiculous version. Already made a transforming guard frame so why not go the full mile here. Also, FOUR HEADS?!
@@kasmichan I'm sure i have other kits around here that have extra of the "grey parts" i got an extra hip joint set somewhere its just a matter of making itnfit the waist unit :)
@@Stramnnar then you're all set then..make use of the extra parts from shining break then modify a few places..i find it more cool with all the clear parts used..more like you get a powered up mode using all those clear greens..
@@kasmichan yeah exactly. just got to see. if i find enough parts maybe i'll post a list of runners/kits are require to build "Shining Left-Over Gundam"
This crazy scenario reminds me of those spare parts bins that some Gunpla shops have. Basically people can dump whatever spare parts they have in there for other modellers to use as kitbash material. You can probably making a few new suits from a bin alone if its full.
I welcome all those extra parts! More custom potential! That aside I believe all the remolded yellow to clear green parts are for the Super Mode, you know that thing where the Shinning Gundam turns gold?
as for those left over parts, you could have 3 possible options 1. Give them to the original HG Shinning Gundam. 2. Dioramas like the Gundam has changed it's armor or the "cast off" option where the original armor is flying off and revealing the new armor. 3. Make it Isometrical. One side looking different from the other. ( Mecha Gaikotsu love this kinda of design right? )
LOOK !! THE SKY IS BURNING RED !!! By the way, that excessive white parts, you could repaint it into dark blue color of Titans series, because in Manga, Shining Break has a previous variant (which dark blue colored) before it turned into white one which we had now. And yes, this suit did appear in Build Diver episode final, for a split second. Exactly at 8:00 minutes.
Actually if you think about it, it’s isn’t odd at all. Those parts are great for when you want to customize the Gundam to your hearts desire. Just paint them off hand, then switch out the parts (kind like how all three of the Build shows suggest). I also love the neon green parts. I would look forward to this model.
I just bough this gundam shinning break over the weekend and just finish building this yesterday and i like it and enjoyed building it and i used the green set instead of the yellow set
I love this kit but quite surprised by how many leftover parts there were. I do have some spare parts from old kits so I might be able to make a second one or even a whole new customized Gunpla.
In my opinion I enjoy this model kit reminds me of "OG Shinning" on top it's pretty easy built and especially if starting out and the extra's are there for many reasons and I really appreciate the thought of it and tbh this my second model kit that I built is my favorite by so far and for those who watched Gundam G should know what I'm talking about.. in my opinion I rate this 10/10 never know when you truly need extras for those failed parts plus for what I paid for it's worth it my dudes 💯👊 Shinning Gundans rule!!!
may be ridiculous, but u know what, i absolutely loved having those extra parts, can use them for seperate kit bashing without having to buy a whole new gundam, alternative heads and chest, double guns. thx bandai for this, as someone who loves the build series as it makes u want to customize and create your own, this is greatly appreciated. i started gundams with build fighters, so i love the use of old gundams with new stuff, kinda makes me catch up with older kits, while having a refresh
Yyyeah, that really confused me too. Just seems like taking the super robot out of the Shining Gundam, which pretty much defeats the purpose. Might as well just use another gundam for the base.
I used this for kitbashing with the extra parts. Its back pack is bad due to only a single peg attachment. A few transformations later, it becomes loose and spins around on its single peg.
Nice review man, I guess we can modify the leftover part into a "Before Version" and paint it in dark navy color so that can save us some money to spend on other kits instead of buying the actual "Before Version" again... What do you think
Yup... I'm going to glue the legs, because the transformable mode isn't worth it the annoyance of the legs coming off. Would be nice if there was like a "cog?" in the thigh part that connects the legs that locks the leg in and rotates to a point to complete the transformation.
Base Shining Gundam plus the Flight Mode style reminded me of Kyrios (due to legs turning) A second beam rifle... at least you can make that to dual-wield that never mentioned.
I bought this the other day because it was the most interesting looking kit at my local Barnes&Noble. I was really surprised by the amount of leftover pieces, and thought they could probably save money by better consolidating the parts and runners, but I just chalked it up to me being a Gunpla noob. I also thought the "transformation" was terrible, and not just for the obvious reasons. There's no way for the arms and legs to peg together, so not only are you just forced to guess how they're supposed to be positioned, but they also flop around too easily. Also, the only thing keeping the shield attached to the backpack is a single tiny peg (smaller than the one that attaches the shield to the arm) that's way too loose, so be prepared to have it constantly pop off.
I just realized it, I think this is where the Core Gundam and Core Gundam 2 armors was inspired from. (Back section of core gundam) and (Rear leg portion of the Uraven Armor is the Knees of Shining Break Gundam), finally the Transformation of the Core Gundam 2 I think is also inspired by this kit.
So basically you can make it go into Super Mode but with Green parts instead of gold. That's actually pretty damn decent for a bunch of spare parts. I know what kit I need to get for my custom then.
I was so surprised when i got this before. I replaced pieces that got loose with the extras. Recently, the leg to waist join broke after i accidentally superglued it together since the thing joint was awfully lose. After rg exia, might get this again
Now that I look at it for so many times, I originally didn't think of getting it, but now that I have a clear idea the it comes with 1 and half gundams, I can use those jointless parts for more armor and Custom parts ideas
the first gundam model I did, the very first, I did not regret it, not a second, then later discover "there is a ground type gundam model of the 08th MS team"
I like having the extra parts. I often loose parts so the extra is really appreciated plus with that translucent green on the head it really works for super mode or since it's the shining break gundam breaker mode.
on mine i left the shield on the back, use both rifles and i used the green on the head and the center of the torso. gotta say after pannel lining it looks good........ o and the sabers do fit in the shield, if you inspect the inside of the shield there are slots for them to fit in while the sabers are attached to the back. i have both large saber handles on mine and they fit in the shield on the back.
actually, with the spare parts, it's actually awsome, speciall for someone who like customizing, I'd be really happy if all their gunplas are like that
I may want to pick this up, I actually bought an HGBF Crossbone Maoh and the entire C-runner was missing so I can try and canibalize the Crossbone with the extras from Shining Break.
So I just built the P-Bandai (before) version of this kit and was trying to figure out why all the extra parts like you. I think I came up with something. In the show there is a version of the kit called "break" mode where it has two shields mounted to the legs and two big boosters on the back. So by providing the doubles it would be easier to make a break mode kit or add on pack. Just my theory anyway.
i got this gundam yesterday and when i finished the beam saber handle took part of the storage area with it, and yes it i amazing how many spare parts there is
So you could swap in the unused parts onto the HG then? Mix and match? If so, that’d be pretty cool and at least for me definitely a feature (since I’m a freak who likes to use the unused parts in HGs whenever a kit has them).
i made the extra beam rifle and shield. the shield with no red flaps i put on his hand. the one with the flaps go on his back permanently to offset the big legs
This looks like it'sfrom an alt universe where Kamille stole the Shining Gundam from a Titans Colony, and heavily modded it to HIS specifications since no way would he be able to use the Shining Finger.
Wait...aren't there services out there that can order replacement parts/runners? I've ordered a replacement red jewel for my Gundam local type before using the website "Gundam Replacement Parts". ....well, it might not be cost effective, actually. That site has a $6 service fee per runner, and the runners have their own fees (may $7 to $12 for a notable runner?).
Welp. Glad I watched this video. This kit just came in and Ive been wondering what to do with my Origins Zaku ll that has the main hip piece missing from the runner. Kit bash, go!
After seeing the excess runner sprues from this kit I immediately thought about Bandai allowing people to mail in their left over sprues to be melted and recycled for plastic
Don't think of the excess as a flaw but as a feature. It means a lot of customization for the base model and extra resources for kit-bashing. I, for one, would rather replace the yellow parts with the clear green parts.
Which is what Bandai is probably going for. I'm not sure by the numbers but I wanna say that likely there is a large percentage of kit bashers in the community so they maybe aiming for that demographic. Yeah maybe those who just want straight build would have to pay alittle more for this but the bashers freak out for this kind of plastic crack.
Shining break sounds like when you accidently drop a gold plated phenex
That’s a horrible thought 😆
@@MechaGaikotsu I can make it worse.
its the P-Bandai PG Phenex
PG Phenex 😙
looks back at recently put togheter phenex* dont worry little one its just an idiot over the internet he cant hurt you.
Ugh broke the tail connection on my phoenix had to use the regular ver
You see leftovers I see parts for a new custom
true
Indeed
the yellow parts all available in transparent green is pretty coo.
same now i'm tempted to get 1 for my self for customization
Sustained
As someone who loves kitbashing this thing is basically a dream
Yeah, perfect for making a "junk heap" gundam out of all the left over parts from other gunplas
You can make the original box kit, AND have spare for you to kit bash.
That's why it was my first gunpla
Ikr
Yep; if you customize this kit is a treasure trove of gunpla.
I know remolding a runner seems excessive, but I think it's a good demonstration on the actual costs of developing a new mold. Plastic pellets are super cheap, though there are also additional hidden costs in logistics when the box size goes up.
Huh? I thought Bandai can separate their mold based on a design they created. The desogn of a mobile suit and some of it upgraded is created months before the mold was made? And they highlights the parts where you need a duplicate or reuse for the upgraded form, and they can separate the same mold into more mold?
@@tonythong5352 Indeed, channel switches are a unique feature to Bandai's molds which allows them to occlude parts from runners to either reduce replication or distinguish products.
However, they must be implemented when the runner is created and cannot be added post-hoc. They also add cost to production, so they're only added where they're deemed necessary. The Shining Break wasn't incepted when they were laying out the Shining Gundam's runners, so there are no switches to accommodate the design.
Bandai exec: how many corners you wanna cut for this new gunpla
Gunpla designer: yes
Slap the second gun in his hand, wing sheild on back. Instant super mode
dont forget to use the clear parts to replace the yellow ones
nothinng to stop you from mimicking kyrio/arios . have both shield on the suit and both rilfles. just find a way to mount the sabers in the shield
@@eisenklad you can actually do the reverse with this kit! mount the guns in the shields like in its transformed mode and then have it hold the Beam sabers.
Biofan813 actually that might be the intended use.....or just spares for a custom.
OMG extra parts? A LOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOT?!
I want this!
e ai paladino, vai colocar ele pra chutar alto?
That's why I got it
They're definitely not charging you proportionally for those parts lol. It's what, 200 yen more for almost double the plastic (most of which is completely usable) of the original Shining Gundam? Sounds like a pretty good deal.
Otonashi yeah. If only you gonna use it and in my case im not even gonna touch it. So basically bandai just charge you for s#!+. Once you snap all together you just gonna put it on display and never touch it again. So thet extra part is just ridiculous.
@@travisstryder216 I'd say the base gundam alone should be 200 yen more anyway, since it seems to use more plastic in its construction than the Shining Gundam even before the leftover parts. And if you're basically getting a bunch of plastic for no real extra charge, what's the harm?
Travis Stryder it’s not shit for customizer
@@travisstryder216 Well, that's a you problem. For people who customize, this is a dream come true.
If they had time to add those parts... They could have added the shining finger hands...
Pretty much all that's left of the Shining Gundam is the Shining diaper.
G Gundam gets too much hate in the community to be honest. It might not be the best but it's still so enjoyable.
I know, I love the design of the God Burning Gundam
? Its actualy one of the most Favoured AU Gundam series. If you want hate, look no further to G-Reco.
@Chandelier Mirage yup, also, it introduce themes and memes that has become the building blocks of other Shonnen anime today. XD
I own the ultra edition of it I love it
Agreed! I also like shining gundam more than burning gundam dont @ me.
Personally this looks to be a fun kit from the leftovers alone. I plan on merging them onto a guard frame somehow and make an even more ridiculous version. Already made a transforming guard frame so why not go the full mile here. Also, FOUR HEADS?!
The Green Parts are for combining with the Shining Gundams special green hands for it's special attack
SHINNINGU... FINGAAAAAHHHH!!!!!!
Duplicate by moulding the other parts.. Now u have 2 gundams
I think that could have been a selling point
Use Blue Stuff or Oyumaru
just got this and after going through my extra poly caps from other kits i can nearly complete the 2nd gundam... lol
try buying some scrap all the gray parts intact and you can build another shining break with clear green fins which looks better imo..
@@kasmichan I'm sure i have other kits around here that have extra of the "grey parts" i got an extra hip joint set somewhere its just a matter of making itnfit the waist unit :)
@@Stramnnar then you're all set then..make use of the extra parts from shining break then modify a few places..i find it more cool with all the clear parts used..more like you get a powered up mode using all those clear greens..
@@kasmichan yeah exactly. just got to see. if i find enough parts maybe i'll post a list of runners/kits are require to build "Shining Left-Over Gundam"
@@Stramnnar hahaha...if you have the build hands, use those^^
This crazy scenario reminds me of those spare parts bins that some Gunpla shops have. Basically people can dump whatever spare parts they have in there for other modellers to use as kitbash material. You can probably making a few new suits from a bin alone if its full.
They WHAT?
Where??
When??
HOW?!
Hold on... Can you purchase them in some way?
I welcome all those extra parts! More custom potential!
That aside I believe all the remolded yellow to clear green parts are for the Super Mode, you know that thing where the Shinning Gundam turns gold?
Seeing extra clear green parts:
Super Shining-Green Mode! * Domon Kasshu Voice *
as for those left over parts, you could have 3 possible options
1. Give them to the original HG Shinning Gundam.
2. Dioramas like the Gundam has changed it's armor or the "cast off" option where the original armor is flying off and revealing the new armor.
3. Make it Isometrical. One side looking different from the other. ( Mecha Gaikotsu love this kinda of design right? )
Lmao as i soon as i see the C A ST O F F i immediately have a robotic voice said cast off in my head lmao
certified kr kabuto fan here
LOOK !! THE SKY IS BURNING RED !!!
By the way, that excessive white parts, you could repaint it into dark blue color of Titans series, because in Manga, Shining Break has a previous variant (which dark blue colored) before it turned into white one which we had now. And yes, this suit did appear in Build Diver episode final, for a split second. Exactly at 8:00 minutes.
The clear green parts are actually not leftover. They’re used to turn the Shining Break into its super mode.
use bluestuff and clone the parts from the first gunpla. and boom. second gundam is yours. lol.
Bluestuff / Oyumaru or Iropura is basically the same thing. buy whichever is available in your country! :)
when shinning gundam wanna fly high like wing gundam....but it haven't a pair of wings...so it did cosplay as kyrios....
Actually if you think about it, it’s isn’t odd at all. Those parts are great for when you want to customize the Gundam to your hearts desire. Just paint them off hand, then switch out the parts (kind like how all three of the Build shows suggest). I also love the neon green parts. I would look forward to this model.
I just bough this gundam shinning break over the weekend and just finish building this yesterday
and i like it and enjoyed building it and i used the green set instead of the yellow set
I love this kit but quite surprised by how many leftover parts there were. I do have some spare parts from old kits so I might be able to make a second one or even a whole new customized Gunpla.
In my opinion I enjoy this model kit reminds me of "OG Shinning" on top it's pretty easy built and especially if starting out and the extra's are there for many reasons and I really appreciate the thought of it and tbh this my second model kit that I built is my favorite by so far and for those who watched Gundam G should know what I'm talking about.. in my opinion I rate this 10/10 never know when you truly need extras for those failed parts plus for what I paid for it's worth it my dudes 💯👊
Shinning Gundans rule!!!
This was also in build divers. It was in the last episode, for about 3 secs
may be ridiculous, but u know what, i absolutely loved having those extra parts, can use them for seperate kit bashing without having to buy a whole new gundam, alternative heads and chest, double guns. thx bandai for this, as someone who loves the build series as it makes u want to customize and create your own, this is greatly appreciated. i started gundams with build fighters, so i love the use of old gundams with new stuff, kinda makes me catch up with older kits, while having a refresh
It feels like someone tried to make a bootleg zeta out of the shining gundam.
Drinking game: take a shot every time Mechagaikotsu says either absolutely and/or utterly
i'm sorry shinning gundam shouldn't have a rifle i cant accept this
Also, needs a shining finger. I mean, what's the point of making a custom shining Gundam if it ain't got the signature attack?
@@JayDayX116 Also no super mode not even just a head transformation
Sorry, buy Kyoji can't help us here.
Yyyeah, that really confused me too. Just seems like taking the super robot out of the Shining Gundam, which pretty much defeats the purpose. Might as well just use another gundam for the base.
It's becoming a tradition to have breakfast every day while whatching your new videos... keep up the good work!
I used this for kitbashing with the extra parts. Its back pack is bad due to only a single peg attachment. A few transformations later, it becomes loose and spins around on its single peg.
Nice review man, I guess we can modify the leftover part into a "Before Version" and paint it in dark navy color so that can save us some money to spend on other kits instead of buying the actual "Before Version" again... What do you think
Yup... I'm going to glue the legs, because the transformable mode isn't worth it the annoyance of the legs coming off. Would be nice if there was like a "cog?" in the thigh part that connects the legs that locks the leg in and rotates to a point to complete the transformation.
I'll make a beautiful custom from this... WITH THE HELP OF KYOJI!!!!!
I see you've brought back a dying meme..... WITH THE HELP OF KYOJI!!!!!
Perfect to use for the harupla kit all those dam extra parts
For transformation into Shining Berkut Mode go to 6:40 👍
Base Shining Gundam plus the Flight Mode style reminded me of Kyrios (due to legs turning)
A second beam rifle... at least you can make that to dual-wield that never mentioned.
It's like Gundam Kyrios & Arios Gundam👍
Holy shit you're right! Just through in those shinning elements
@@tekkadan097 Gundam Shining Break's head it's like Arios Gundam,you know
Nah, more of Wing and Kyrios
I bought this the other day because it was the most interesting looking kit at my local Barnes&Noble. I was really surprised by the amount of leftover pieces, and thought they could probably save money by better consolidating the parts and runners, but I just chalked it up to me being a Gunpla noob.
I also thought the "transformation" was terrible, and not just for the obvious reasons. There's no way for the arms and legs to peg together, so not only are you just forced to guess how they're supposed to be positioned, but they also flop around too easily.
Also, the only thing keeping the shield attached to the backpack is a single tiny peg (smaller than the one that attaches the shield to the arm) that's way too loose, so be prepared to have it constantly pop off.
I mean... you can change the v fin ant the vents for the translucid parts and say is preparing a special attack.
Just saying.
@JormungandR ah, sorry for my English.
I just realized it, I think this is where the Core Gundam and Core Gundam 2 armors was inspired from. (Back section of core gundam) and (Rear leg portion of the Uraven Armor is the Knees of Shining Break Gundam), finally the Transformation of the Core Gundam 2 I think is also inspired by this kit.
So basically you can make it go into Super Mode but with Green parts instead of gold. That's actually pretty damn decent for a bunch of spare parts. I know what kit I need to get for my custom then.
I was so surprised when i got this before. I replaced pieces that got loose with the extras.
Recently, the leg to waist join broke after i accidentally superglued it together since the thing joint was awfully lose. After rg exia, might get this again
Drinking game:
Take a shot everytime Mecha says "Absolutely and utterly ridiculous"
Now that I look at it for so many times, I originally didn't think of getting it, but now that I have a clear idea the it comes with 1 and half gundams, I can use those jointless parts for more armor and Custom parts ideas
the first gundam model I did, the very first, I did not regret it, not a second, then later discover "there is a ground type gundam model of the 08th MS team"
You just pop the shield on the back of his head A la Gundam Wing 😂🤣😂🤣😂🤣 when you got to that part sprayed Pepsi out of my nose🤣🤣😂😂
Btw u can have the beam saber handles still attached during the transformation, they fit perfectly underneath
I like having the extra parts. I often loose parts so the extra is really appreciated plus with that translucent green on the head it really works for super mode or since it's the shining break gundam breaker mode.
As a custom builder, I appreciate the extra parts. Give me your extra parts, Mecha!
im exited to use this as my first painted build, so many pieces to trial and error with
on mine i left the shield on the back, use both rifles and i used the green on the head and the center of the torso. gotta say after pannel lining it looks good........ o and the sabers do fit in the shield, if you inspect the inside of the shield there are slots for them to fit in while the sabers are attached to the back. i have both large saber handles on mine and they fit in the shield on the back.
Looks like the Kyrios filtered through the Shining.
actually, with the spare parts, it's actually awsome, speciall for someone who like customizing, I'd be really happy if all their gunplas are like that
that Clear green V-Fin looks so awesome!
I may want to pick this up, I actually bought an HGBF Crossbone Maoh and the entire C-runner was missing so I can try and canibalize the Crossbone with the extras from Shining Break.
So I just built the P-Bandai (before) version of this kit and was trying to figure out why all the extra parts like you.
I think I came up with something. In the show there is a version of the kit called "break" mode where it has two shields mounted to the legs and two big boosters on the back.
So by providing the doubles it would be easier to make a break mode kit or add on pack.
Just my theory anyway.
i got this gundam yesterday and when i finished the beam saber handle took part of the storage area with it, and yes it i amazing how many spare parts there is
So you could swap in the unused parts onto the HG then? Mix and match? If so, that’d be pretty cool and at least for me definitely a feature (since I’m a freak who likes to use the unused parts in HGs whenever a kit has them).
Thanks for reviewing this (finally)! haha you should build a Robi and use it as your co-star in your videos!!
i don't mind the extra parts. it's just in case something breaks that can be replaced without buying a new kit
i made the extra beam rifle and shield. the shield with no red flaps i put on his hand. the one with the flaps go on his back permanently to offset the big legs
The clear v fin looks so cool even if its just a extra part
the title made me think that your shining break came in 3/4 of a gundam
If you use some Blue Stuff to make molds and 2 part resin to copy all the joint parts you could absolutely build 2 of these.
Big brain
3:36 I would call that a win you get parts to do whatever you want
I actually appreciate lots of extra parts and stuffs. It is not pricey too, so Im pretty much happy with it when I get one.
extra broken high grade
*looks at my astraea, age 2, exia dark matter and strike freedom"
I super glued the windshield on a separate backpack so I can have a Wing pack for this kit and the shield without the wing parts is now it's Shield
This looks like it'sfrom an alt universe where Kamille stole the Shining Gundam from a Titans Colony, and heavily modded it to HIS specifications since no way would he be able to use the Shining Finger.
I think they gave us extra parts because we might literally break it for design use.
Okay,now I wanna see a video of someone making another shining break with those spare parts
The fact that a build gundam is based on a particular suit and doesn't contain it's most distinguishing feature boggles my mind.
I really want to see Star Burning + Shining Break kitbash
Wait...aren't there services out there that can order replacement parts/runners? I've ordered a replacement red jewel for my Gundam local type before using the website "Gundam Replacement Parts". ....well, it might not be cost effective, actually. That site has a $6 service fee per runner, and the runners have their own fees (may $7 to $12 for a notable runner?).
Welp. Glad I watched this video. This kit just came in and Ive been wondering what to do with my Origins Zaku ll that has the main hip piece missing from the runner. Kit bash, go!
It looks like a cross between the shining gundam and zeta
damn ! you can do a form change with those extra parts
This extra pieces for some cool kit bashing is all from the thanks of Kyoji!
Re watching this while trying to decide on what to build next. Use all the green and make Kryptonite Gundam
this mobile suit was actually shown in the last episode.
just remember to listen to that one guy calling out to his friend Zen!
It's a double ball joint, so you do get that "Giggity Giggity". 4:50
Finally, in my review I said it was pretty good, I'm glad you think so too
After seeing the excess runner sprues from this kit I immediately thought about Bandai allowing people to mail in their left over sprues to be melted and recycled for plastic
The extra shining parts nice... I can remodel it into something... Big fan sir
Maybe they added those parts so you could have spare parts to customise and also have a back up copy?
When I first saw this kit I thought it was more of a U.C mobile suit than a G Gundam kit but still pretty cool.
can someone tell me who is the builder of that model kit in the manga
I might just learn how to paint it, and use all the clear green parts for somewhat of a shining finger mode.
I know that this is several months old. But are there any other HG kits like this. That could make another suit from all of the spare parts?
You don't need to take out the beam sabers for the transformation, you need flip the wings ALL the way out
I just connect the shield and rifle together and dual wield them as beam cannons
Hey i have thisngundam and, i not remove the beam saber when trasforming , because i see in the shield (bottom) looks like a room for the beam saber..
Shining Gundam with a gun?
BLASPHEMOUS!
The Crystal V crest looks so cool though. They should do that for a Gundam.
Don't think of the excess as a flaw but as a feature. It means a lot of customization for the base model and extra resources for kit-bashing. I, for one, would rather replace the yellow parts with the clear green parts.
Which is what Bandai is probably going for. I'm not sure by the numbers but I wanna say that likely there is a large percentage of kit bashers in the community so they maybe aiming for that demographic. Yeah maybe those who just want straight build would have to pay alittle more for this but the bashers freak out for this kind of plastic crack.
Wish they have included the shining finger fist