I have a baofeng dm1801 with the open firmware. Pressing one of the side buttons reveals the rx and tx frequencies of a memory channel - is this the same for RT3s? Also I'm assuming that the channel knob changes channels? Thanks
Is the pinout for the programming cable different on the RT3S to the Baofeng DM1701? I made my own cable for the DM1701 but my pc says the RT3S is an unrecognised device, its not a driver issue, its the USB itself failing to find a device ID.
What cable are you using, i got a cable by Retevis but is it true that the RTS3 GPS and Non GPS use a different type of Cable without a serial converter in the cable?
@@HamTechRadioScannerDrones I just installed the 3.0.1.0 drivers a different roundabout way. I opened the default RT3S software and the software does a download from the radio, but doesn't seem to be showing any saved memory channel data from the radio.
It expands the capabilities of the radio in so many different ways. Especially the scan speed now rivals that of a high end scanner.
I have alot to learn enjoying tinkering I do like a colour screen tho.
Thanks for this took the leap and got it installed but still learning the controls
So good.
I have a baofeng dm1801 with the open firmware. Pressing one of the side buttons reveals the rx and tx frequencies of a memory channel - is this the same for RT3s? Also I'm assuming that the channel knob changes channels? Thanks
OPEN GD77 MEMORY CHANNELS M0FXB
That elusive programming cable
They only 7 pounds :
Is the pinout for the programming cable different on the RT3S to the Baofeng DM1701? I made my own cable for the DM1701 but my pc says the RT3S is an unrecognised device, its not a driver issue, its the USB itself failing to find a device ID.
No idea seems alot hastle better to buy a cable .
2:47 I'm confused. Where did you get this folder on the desktop from? Was it a download.
Take your time watch lots Videos look in description.
port hatası alıyorum nasıl çözerim yardım.. usb dfu kurulu sürücüler tm ama port görmüyor opengd77
It wont be a port look in dfu.
What cable are you using, i got a cable by Retevis but is it true that the RTS3 GPS and Non GPS use a different type of Cable without a serial converter in the cable?
Buy the cable for the RT3S
I can't get this radio to be recognized on Windows 11.
I've tried it both with pressing the 2 side keys when turning on and without.
The drivers are installed when you install the CPS Software .Follow the steps slowly and carefully .
@@HamTechRadioScannerDrones I just installed the 3.0.1.0 drivers a different roundabout way.
I opened the default RT3S software and the software does a download from the radio, but doesn't seem to be showing any saved memory channel data from the radio.
essa versão do retevis rt3s é mais antiga? o novo chip clone não esta aceitando o open gd77
Yes older
If I install this do I just write my own code plug into it or do I have to completely reprogram everything?
Complete re write u may be able to imort items.
@@HamTechRadioScannerDrones thought that. It's what's putting me off for now.
Wich button i have to push to get in the TEST mode, thanks
What is test mode ??
Will it work on UHF rt3
No
Tell me please, where to buy RT3S?
Hi good place on Ebay:ebay.us/Gmzb1X
@@HamTechRadioScannerDrones Thank you!