bro if the tiles quality is best then it may not work and it will be much more harder to remove the paint so i think everyone should use low grade tiles first i tried with a high quality tiles and i spend 2 hrs to clean the color but i was failed then i find a pace of low quality tile then i tried with that and within 2 hrs i done everything and i tested it and it's working
I know for sure I have some problems with my eyes but if you look at the minute 5:54 and rewind back to when he was sanding the tile, they are not even the same color 😳... maybe is the light 🧐
@@shreyasdongare6152 🥲 sorry to hear that bro ..some other also facing the problem 🥲 .I don't know why like that ..I made 3 of them they all work but I don't know why others are facing the issue sorry🥲
@@aquasquare sure, I did make one before but I think the tile I used was different. So it didn't work for me. How much time does it take for the bubbles to come through the diffuser when we connect it to a diy CO2 system which is already working?
@@ramilharsh7357 oh that bad , use ceramic tile only. For me it took around 24 hours but it depends on the amount of Yeast add to the suger, if u want to test it quickly add more yeast but it will not last long..And one tip is keep the tiles in the water before sanding it will reduce the work
It worked bro, thank you. Actually I was using the jelly method before to make CO2 but I think the pressure was not enough, after I tried your method it is working.
@@ramilharsh7357 that's good bro😍... Yes the jello method is little tricky because the measurements want to be precise .. if anything goes wrong the pressure will be low.but if done right it is the best method
@@aquasquare hi i maid this and it work better than market diffuser 😎 but I had to sand it to make it a one millimeter because of ceramic material i used to be but the bubble's are very tiny 💪🏻so thank you to learn this amazing thing 🤝🏻
@@scarface.ak69 bro it is a difficult task, use Lower grit sand paper for the paint part it will help . After removing small paint portion it will easy
better buy a good diffuser like aquario neo aur aquo pro...because these diy doesn't work properly, they wont allow the pressure less than 25 atm pass through...and other things...just invest money on a good diffuser even for diy
Cigrate filter working same as ceramic tiles so for me no need ceramic hahahah now u can say smoking 🚬 not bad always hahahah use filter working perfectly smoothly
Tried clay pots. There are part that has tiny bubble. Some part has big and sometimes it doesn't give any. Lucky if you got the right spot on your clay pot
Great video! I'm going to have to give this a go soon.
Thankyou..😊
Great video! Thank you for the making process :)
Omg! You're awesome. Thanks for sharing this.
Thank you 😊 did you tryed it
Damn. That looks amazing...
Pever thanne ✨
😁
How long does it lasts?
bro if the tiles quality is best then it may not work and it will be much more harder to remove the paint so i think everyone should use low grade tiles
first i tried with a high quality tiles and i spend 2 hrs to clean the color but i was failed then i find a pace of low quality tile then i tried with that and within 2 hrs i done everything and i tested it and it's working
Thanks bro good information
I couldn't removed those colours and gave up
Excellent
Would this work with terracotta pot sanded smooth?
Don't known bro
I know for sure I have some problems with my eyes but if you look at the minute 5:54 and rewind back to when he was sanding the tile, they are not even the same color 😳... maybe is the light 🧐
It is because of light and also maybe I think last some shots i look in another phone
How will it longer?
I mean when i have to change the suger?
Can we use it in a pressurized setup?
Yes, but keep the pressure low first and ensure that there is no leak
how many weeks does this co2 system holds ?
Ff
Superb video🔥
Thank you
amazing video, i will try this, bro are you Indian?
Yes bro try it😊.. Yes iam from india, Kerala 😊
So as microbolhas depois de 24 horas e ?
it's working tks bro it's worth than 600/- Diffuser
Happy to hear that 😊
same like please try low cost soil and light
My ceramic tile isn't giving bubbles . What should I do?
Make it thinner
Nice 👍
i tried but it didnt work . no bubbles at all
Are you using a pressurized co2 or DIY one??
Diy co2
I made it slim like a coin but it didn't work with my Yeast n sugar system
@@shreyasdongare6152 🥲 sorry to hear that bro ..some other also facing the problem 🥲 .I don't know why like that ..I made 3 of them they all work but I don't know why others are facing the issue sorry🥲
Hey bro it worked.. all you have to make that ceramic plate.. thinner than coin
1mm aprox or less
Which glue are you using?
Normal super glue
@@aquasquaredid u have fish or shrimp in the tank? How r they rn?
Thanks so much ❤
Bro i made it thinner than a coin... Than as thin as paper... Its not bubbleing
Bro just check for any leakage. And cheak if there any pressure is building inside the bottle
Will give it a try.
Yes bro give it a try , try to sand the both sides to get a thickness of 3mm.
@@aquasquare sure, I did make one before but I think the tile I used was different. So it didn't work for me. How much time does it take for the bubbles to come through the diffuser when we connect it to a diy CO2 system which is already working?
@@ramilharsh7357 oh that bad , use ceramic tile only. For me it took around 24 hours but it depends on the amount of Yeast add to the suger, if u want to test it quickly add more yeast but it will not last long..And one tip is keep the tiles in the water before sanding it will reduce the work
It worked bro, thank you. Actually I was using the jelly method before to make CO2 but I think the pressure was not enough, after I tried your method it is working.
@@ramilharsh7357 that's good bro😍... Yes the jello method is little tricky because the measurements want to be precise .. if anything goes wrong the pressure will be low.but if done right it is the best method
How to stop the co2 at night?
Split the pipe in two and add jointer in between and daily at night just disconnect them works for mw
@@imranzama But the co2 will go waste?
💯🎉
Hi, can we use airstone as a diffuser?
I think it is not a efficient way to dissolve co2 .. because tha bubble will be bigger
Nice very helpful 👍
Good,👍
Nice
Bro thats amazing im trying to maid this and selling to my friends 🤣🤣🤣 (kidding) im from Iran rasht city of silver rains❤️
😂😂 Also share this video to friends 😬🤭, i searched you place in Google it looks amazing 😍
@@aquasquare hi i maid this and it work better than market diffuser 😎 but I had to sand it to make it a one millimeter because of ceramic material i used to be but the bubble's are very tiny 💪🏻so thank you to learn this amazing thing 🤝🏻
😍 happy to hear that
it's not working bro air cannot come through tile piece with small thickness but not working
Try to make it thinner
@@aquasquare it's working tks bro
I made that with ceramic tyle bud it isnt giving bubbles 😅
🥲 bro try to reduce the thickness.. maybe it will work .
Bro i tryed but not working? Now what should i do?
And use drip set thats how u can get a buble counter in it as well nd also Stopping valve😂
Yes😂
after watching ur video , now im searching for a piece of tile 😂 from 15 mint TBH coz i want one Diffuser for my new tank
@@scarface.ak69 😂 ok bro all the best 😊
how to remove the paint from tile its taking forever😂😭
@@scarface.ak69 bro it is a difficult task, use Lower grit sand paper for the paint part it will help . After removing small paint portion it will easy
i just make one..
Dose it work for you
I have Make it but dont working 😖😑
Try to after reducing the thickness 🥲
@@aquasquare I have made it thinner than your one but then also it not working
Not working 😭😭😭😭
Bro try to reduce the thickness of the tile
better buy a good diffuser like aquario neo aur aquo pro...because these diy doesn't work properly, they wont allow the pressure less than 25 atm pass through...and other things...just invest money on a good diffuser even for diy
Aquario neo diffuser are so expensive in here . With that cost we can buy new tank here🥲
💝💝💝💝💝💝💝💞💞💞💞💞💕
Too much trouble. I will spend a few dollars and order one from Aliexpress
@@ronniet10 good bro 😊
Removing the paint is such a difficult task😭
Injection with cigrate filter best combo no need ceramic tiles rubb hahahah easy n fast way 😂😂😂
Yes bro it is a difficult task🥲
@@pagalsanki1494 😂
@@pagalsanki1494 ceramic works better that cigarates filter. ceramic is making the bouble smaller. i also have try it my self
Cigrate filter working same as ceramic tiles so for me no need ceramic hahahah now u can say smoking 🚬 not bad always hahahah use filter working perfectly smoothly
😂🤣 That's nice..I will try it.. thanks for the info 😊 ..
How often do you need to renew one? I intend to use it too
Can we use garden clay pots?
Don't known bro 😬.give it a try
@@aquasquare I have made it with ceramic tile but it doesn't work
Tried clay pots. There are part that has tiny bubble. Some part has big and sometimes it doesn't give any. Lucky if you got the right spot on your clay pot
💯🎉
Thanks for the support 😍