No. You will have to remove the post, turn the chair, install the post. I made a couple of attempts at this and ended up building a custom base. I needed to be able to swivel the chair at any angle and also wanted to be able to center the table with the four chairs. I have a Airstream Interstate Lounge. Here is the link to what I made for my AI. www.airforums.com/forums/f240/our-journey-begins-2018-ai-tb-lounge-173135-84.html What Canyon Adventure Vans have made is great for an easy setup, even if you need to take some extra steps to swivel the chair. Not everyone is into making something from scratch.
8:40 - Those ratchet handles from Lagun are defective cheap ones from China. They can be replaced by Part # 6320K18 - McMaster-Carr - Plastic Adjustable Position Handle $10.47 each in black or orange. Much stronger and fits right. Your install is nicely done except for two things: 1. Heavy extruded aluminum section + plastic cap + L braces will cost a fortune from 80/20. Such a huge rip off it makes me mad. You know they are all built in China for peanuts. 2. Lagun Mount does not screw in on both sides but leaves one hanging. You are better off adding a block of wood to the back of the plastic chair base so that both screws sides can be used. What about mounting it to the other storage base facing the chair. The way it is mounted now will create a wobbly table.
Our Galleria ha floor mount in front, but the adapter, designed to hold the lagun table, doesn’t work. Is a hole under the floor mount necessary? Can’t se how I could mount to the driver’s seat and still rotate the seat?
Great mod. But what if you have the bed set up for the dog, you have to remove this table, right? Or does it go down low enough to avoid the dog bed cushion?
I would love to see a video with the drivers seat turned around to look at the dining setup for two people.
That is such a great idea for the Revel. It's always nice to have extra table space.
Especially while driving.
Really cool I’m sold, can you share a link of where I can buy this?
I like it. Can you still swivel the drivers seat around with the table in place?
That’s my question as well. It looks like it won’t swivel properly with the table still in place
You have to slide the table off, swivel the seat and slide the table back on.
No. You will have to remove the post, turn the chair, install the post. I made a couple of attempts at this and ended up building a custom base. I needed to be able to swivel the chair at any angle and also wanted to be able to center the table with the four chairs. I have a Airstream Interstate Lounge. Here is the link to what I made for my AI.
www.airforums.com/forums/f240/our-journey-begins-2018-ai-tb-lounge-173135-84.html
What Canyon Adventure Vans have made is great for an easy setup, even if you need to take some extra steps to swivel the chair. Not everyone is into making something from scratch.
Can you still swivel your chairs round? Thanks
8:40 - Those ratchet handles from Lagun are defective cheap ones from China. They can be replaced by Part # 6320K18 - McMaster-Carr - Plastic Adjustable Position Handle $10.47 each in black or orange. Much stronger and fits right.
Your install is nicely done except for two things:
1. Heavy extruded aluminum section + plastic cap + L braces will cost a fortune from 80/20. Such a huge rip off it makes me mad. You know they are all built in China for peanuts.
2. Lagun Mount does not screw in on both sides but leaves one hanging. You are better off adding a block of wood to the back of the plastic chair base so that both screws sides can be used. What about mounting it to the other storage base facing the chair. The way it is mounted now will create a wobbly table.
Perfetto! 🥰👍
Where can i buy this kit? Would you mind putting up the link please?
Where can I get the mount
Where did you get that aluminum block you added to the back of the drivers seat base?
It’s a piece of 80/20 extruded aluminum. Can order it online from several different companies.
@@PixelBokeh I think that is 80/40
Our Galleria ha floor mount in front, but the adapter, designed to hold the lagun table, doesn’t work. Is a hole under the floor mount necessary?
Can’t se how I could mount to the driver’s seat and still rotate the seat?
Let's see the chair swiveled around toward the galley with steps to allow this ?
Great mod. But what if you have the bed set up for the dog, you have to remove this table, right? Or does it go down low enough to avoid the dog bed cushion?
Will it work for ford transit? When is the ford transit model coming if not?
Unfortunately this isn't made for the Transit and we don't have a timeline of when that will be available.
Link?
Joli