BMW 35D M57 FLUIDAMPR / SWIRL FLAP delete / EGR race pipe / EGR cooler removal + INSTALL!
HTML-код
- Опубликовано: 11 сен 2024
- Welcome back everyone! Today we've got another gorgeous BMW X5 E70 35D in for some well deserved parts! This truck came in with a previously done muffler delete done by another shop. We are going to clean up some of the previously done work on this one and in addition. We will be installing a Bimmertune billet EGR race pipe, removing the swirl flaps and installing the necessary block of plates in place of. Two supplied coolant block off caps will be placed in place of the front EGR cooler. We will clean the intake manifold of all the carbon build up with some purple power and stiff bristle brushes and install all new gaskets. Following that we are going to install a clutched alternator pulley and also a "Fluidampr" in place of the OEM harmonic balancer. In addition we will install new belts on the truck and show you guys how to install the front side stretch belt using a cheap off the shelf stretch belt remover and installer!
Part numbers used below !
Bimmertune EGR race pipe part no#EGR170 USF
Intake manifold gasket kit part no#11617790198KITX
Fluidampr part no#FLUm57
Swirl flap block offs Darkside developments part no#BMW1024
Stretch belt part no#11-28-7-803-476
Lisle stretch belt tool part no#59370
Thanks for watching ! Make sure to like and SUBSCRIBE for more!
Keep your sticks on the ice and stay TUNED!
Olaf
![Chlöe - Shake (Feat. Jeremih) [Official Visualizer]](http://i.ytimg.com/vi/aDs_1ufpfv8/mqdefault.jpg)
I have done this procedure on a 335d , not yet on my X5 , this video was so well documented, your attention to detail reminds me of my decades working on 911 air cooled . We have the same work standards . Bravo !
Wow thank you kindly for the kind words my friend 🤟🏻 thanks to watching I truly appreciate that !
Put some glue on the copper gaskets weather striping it will help them from not fallin off in the future removals of the intake manifold
Those ones I don’t have much issues with falling off as they sit in grooves and the gaskets have little ears so to speak to hold them in ! But yes you could if you wanted too !
Great video
Thank you
For the locking pin just use an allen key
Thank u brother !
Hi, what can happen in a BMW e70 35d after removing the EGR, there is an emergency mode error after revs above 1500 after acceleration and an error in fixing the P0299 turbocharger low boost turbo?
You need to get it coded out so it’s not looking for that . That’s where the software upgrade comes into play , did you hook everything back up properly shouldn’t be getting a low boost error
Very cool video. Sounds fantastic. Thinking about doing egr and def delete and tune on a 2017 Cruze with 215k. I’ve seen a couple of posts that doing this may cause it to not reach operating temps. Wouldn’t the tune take this into consideration?
Depends on the tune and tuner if they are well rounded and have seen that issue they would for sure have addressed before even selling said tune . But revisions are what tuning is all about , talk to your tuner and see if he can revise the file to compensate for that !
About to install an EGR delete on my 335d. Will I be able to drive it about 10 miles to a shop for a tune without it going into limp mode?
Hey there !!!! I am not 1000000% sure as I’ve never done it that way , I would think safe yes , if you just get reduced engine power sign you should still be ok to drive to shop just drive it nicely and it’ll be ok !
Where are you located
I would like mines done😢
👍👍
Thank you !
Whats the point of an alternator clutch pulley...?
It helps with the fluidamper some people have experience pre mature rod bearing failure due to these and the clutched pulley apparently helps with that when running the fluidamper
Where is your shop located?
did you tune the car before first startup? debating on doing this tmrw but i don’t have a tune yet. could it still be driven without going into limp mode with the egr and swirl flap delete?
i think itll run just lots of lights
Yes ! JR 2.9 tune
Yes ! JR 2.9 tune
Mant Stories of.. Bearing failure from fluidampr is not worth me putting that on oem only ...
I have read this as well . Customer supplied his own parts here so I installed whatever he brought me at his own discretion !
My swirl flap broke and is now making it misfire on cylinder 4 is this bad has 220k miles?
Yes this is bad if it broke it will send pieces into your combustion chamber possibly causing further mechanical damage to piston / cylinder wall / valves or the head itself
Hello. I want to delete everything on my x5 e70 35d. how much will the whole environmental removal kit cost. I live in Chicago.
Depends on the parts you use and software you get but a pretty standard ballpark would be $3000-3500 CAD
I have deleted my X5 however I didn’t have those water block off plates where can I get a set those are much cleaner??
They are available all over online even Amazon !
@@SkiNShift do you know what they’re called or part number?
Yes please?
What did you use for a tune?
Hey ! JR 2.9 tune !!!
Where you located?
I’m in Canada
Hello from Edmonton, Alberta! My brother has an X5D and he's getting to the point where it doesn't make sense for him to keep repair all the emissions crap so he's thinking about getting rid of it all. What would it cost roughly parts/labour wise to delete/tune one of these rigs? And do you have a vendor/website that you would recommend for buying the kit. Any info is appreciated.
Approx 3-4k Canadian depending on the tune you get and installer ! I used dark side developments for the egr race pipe , swirl flap deletes are cheap and available many places for peanuts and I used VRSF for downpipe ! JRtunes for the 2.9 tune was most costly part otherwise the labour will range but I usually charge 1k +
Ran me $4,280 all in including labor. Included Bimmertune EGR Delete, egr cooler delete, swirl flap delete, new vacuum accumulator, all new silicone vacuum lines, Stevenson downpipe/exhaust kit, and Stevenson stage 2.0 tune. Absolutely best money I've ever spent on any performance parts and tune on any car ever. Pulls like a freight train, it's a nice clean tune and gained 3.5 mpg.
Very good info, do you have an Instagram account as well? I have the same car and would love to chat
Yes I do ! @european_luxury_motors