Это видео недоступно.
Сожалеем об этом.
Pioneer VSX409-RDS | Volume knob repair
HTML-код
- Опубликовано: 13 апр 2017
- This video shows how to repair the volume encoder of an old Pioneer VSX409-RDS.
Problem:
the volume knob (which gets stuck) consists of a rotary encoder containing some protective grease, which however ages with time.
Solution:
Clean the rotary encoder with Isopropyl alcohol (IPA).
Credits:
- Free & opensource video editor - Kdenlive at kdenlive.org/
- Music from Jukedeck - create your own at jukedeck.com
This is an extremely rare, highly blessed instructional video that contains exactly the right amount of information. Nothing important is left out and nothing unnecessary is included. The pacing is perfect and so is the camera placement, lighting and clarity. I commend you and thank you for the valuable knowledge. Be well.
Fixed my VSX-D409! This was great! I used rubbing alcohol and a tiny bit of WD-40 to re-lube. This has been broken for over 10 years! Thank you Francesco!
Thanks for this excellent video! On my VKSD-509S I didn't need to unplug anything (except the 120v). I was able to pull the face off and get to the screws of the volume encoder holding the front display a little to the side of the receiver. Also, I pulled the knob off the circuit board, holding the face of the receiver instead of pulling the circuit board from the knob. Thanks again for giving me the confidence to fix my volume stuck at max. OH - I also used CRC QD Electronic Cleaner without a brush. I sprayed both ends of the encoder and blotted it clean with a shop towel.
I completely agree with gvhagopia, from 1 year ago: clear, concise, just what I needed to know, no more or less. Saved a nice amp that I'd had in the giveaway pile for a couple years. Now enjoying our local community radio station in my basement workshop. Thank you!
I just purchased this VSX409. I got it home and the volume was not working. I found your fabulous video. I followed your exact instructions and it works beautifully. Thank you so much. A great piece of equipment working due to you!
That's awesome! Good job
Kudos! I just got this exact model cheap used, and with your help i fixed it in 10 minutes with zero extra cost. Score! Thank you
Many thanks for video. But you do not need to remove whole front panel for that repair. You can unscrew encoder board only (it's very easy, bacause there is great access from the side.).
Magnificent! This works as well for my VSX1015. It's as new again. Thanks.
My 1015 just started acting up. The volume knob has to be turned VERY slowly in order to work at all and it sometimes goes the wrong direction! Was this similar to what you experienced on your 1015?
Dude, you saved a great stereo with this informative and down to earth vid, Big Hooah brother, Thank you.
Expertly presented. I followed your instructions to repair my Pioneer D498 volume control. Thanks for your help
You're welcome!
Fixed one, exact same problem. Looks like pioneer's original lubricant turns into sticky gummy mess after aging...
Fabulous. Old receiver back to normal.
Excente , muchas gracias
Magnificent thank you . Worked a treat
fixed my receiver, thank you!
Does this also fix volume fluctuations/cutting out in certain channels? I have a VSX-816 that certain speakers work as you put some pressure on the knob as you're turning it - they go in and out. It's progressively gotten worse recently and some channels won't stay in or they work better when the volume is higher. Any advice is appreciated. Thanks!
good werk Antonio
brilliant! Thanks so much!
good job! )
Vsx-505s tried it doesn't work.
Merci
Excellent
Même panne pour un ampli acheté 10€.
Maintenant le son se règle à merveille.
Comme Neuf !
Belle vidéo, Beau travail
-------------------------------------------------------------------------------
THANKS
Excellent
Same failure for an amp bought for 10€.
Now the sound is adjusted perfectly.
Like new !
Nice video, nice work
I tried to fix one of these once and failed. It was actually an amp i got fairly cheap but then i lent it to someone who left to a different country and didn't bother to give it back. On top of that the building he had been living in was demolished. I never did track it down.
Thank you!
Very smart
Mine was still working a little bit, not completely out yet. I followed these instructions exactly, cleaning all the crud out so it looked spotless. I didn't scrub, only sprayed, but now my volume knob doesn't work at all. Was there a step not shown, am I suppose to put new electrode grease on it or something?
Hi, the grease doesn't improve electric contact, It should prevent oxidation only. In your case I woukd double check that the volume knob case is closed correctly. The two spring contacts have to be pushed against the wheel in order for the knob to work.
@@frab88 I'll check it out and let you know, thanks!
My Marantz is the same 5 years old three weeks to fix this problem, 4 years later went again, so i did this and ok, now 3 years later the same but what ever i try nothing?
Just wondering, I own a Pioneer VSX AX10I where the volume control is erratic. Would this be the same issue?
Guess mine is staying broken
Thanks mate!!!
good job
hello..what kind of electronic cleaner and brush are you using?
IPA solvent and antistatic brush
@@frab88 Good day..I have a 409 and have no volume control. it did work at first and then went full volume so I turned it off Did like your video showed and still no luck with it working...where can I a pot replacement...thanks
Thanks..mine has this problem and k don't have the heart to get rid of this beautiful old school amp.
Any ideas on why it always defaults to factory settings if the power is off for a few days??
Check for any battery on the main board and replace it if necessary.
Thank you.Greetings from South Aftica 🇿🇦🇿🇦🇿🇦
Same problem,now,🤔
Content...mo.no...
Piss poor engineering.A lot of other manufacturers having same problem