Nice test mate. I have the Milwaukee 3/8 stubby and absolutely love it. This Parkside doesn't look too bad either, i'd still go with the Milwaukee personally but nice for people that dont want to spend the money and that are already on the Parkside battery system.
we would all go with the red one if money was no object :P i would if i used it more... but for how much i use the tools (a few hours a week at home) it dont make sens to go with the waukee
Drill- Packedge in typical box, came with a tool bag (added bonus), two batteries, one charger, drill, and driver. Two words "plenty of Torque" ruclips.net/user/postUgkxW1vOBRCMrgTCDEijzpVzDWsgI-Jm2iQv well I guess that's three. Nice upgrade from current setup. Has belt clips, I don't think I will be using those. Driver and drill were bigger than what I expected but it is an upgrade from the current setup. For the money I would say that this is a great setup for Professionals and DIY/Weekend warriors.
I bought an 18v and 12v parkside tool with batteries. And now I have the batteries, I pickup all the silly tools I see at Lidl because the bare tool offers can be quite seductive. Nail gun, bandsaw, paddle mixer, mini 12v angle grinder 1/2 inch 18v impact wrench.... And that is me on a Makita 18v and Metabo 18V platform.
Good test The Milwaukee is the better one but it is also much more expensive and if you will use it only to change your tires twice a year. I would go for the parkside. As a professional I would go for the Milwaukee. I‘ve had the Milwaukee and it was very good but I swapped to the Hazet 9012M. The Hazet is much more fun but it‘s not mobile.
That wasn't a true test towards the end, because you did not re-tighten the nut to the original torque. The Parkside tool might have started to loosen the nut, making it easier for the Milwaukeeto undue, so, not a true and fear representation.
I own a 20v parkside combo drill, it's ok but it's very large and heavy, my milwaukee m12 gen 3 combi is actually just as good power and endurance, I've now converted to milwaukee m12 gear, everything is light and compact and doesn't what I need it to
@@foogeesun5395 uz si ho skusal takto cez momentovy kluc? ja som ich uz prerobil tych utahovaciek aspon 50 kusov na 1/2 a zatial najvazsiu moznost som mal 420Nm otestovat a pri 420nm mal este celkom slusnu rezervu. tento test sa vola staticky a ono to kus inak funguje ked zatahujes takuto maticu a hned povolujes (mimo ine ta matica mohla mat kludne 70°C kvoli tym razom) inak to kus funguje keby to zatiahol na 400nm napr a povolil na druhy den.
@@xtp6969 nezkoušel,ale mám ho v práci na vlastní náklady v dílně(taková moje zkouška co vydrží v extrémních podmínkách) a maká každej den,máme v práci momenťák do 1000Nm ,tak klidně můžu vyzkoušet.
What price is the park side expected to be? Considering the new brushless 18v impact wasn’t exactly cheap for Parkside prices Amazon was retailing same price as Milwaukee 😂
@@icku 699,00 zł I’m Poland 🇵🇱 which is £130 without charger and battery 🔋 considering Milwaukee can be purchased with 2v and 6v with charger for £180 if shopped around it’s worth considering if the UK lidl is going to sell it as a package with charger and battery and what that would cost
Este modelo es de 12V y por tanto usa las baterias de 12V de paekside. Si quieres un atornillador de impacto para baterias dd 20V, lleva mucho tiempo en el mercado. La de 12V es mas compacta, la de 20V es mas potente.
Compare a price of those two wrenches Milwaukee is more expensive than a Parkside. Parkside is not for professional use they are hoby tools and those are not bad.
There is no comparison between this brands, different worlds in therms of quality and comfort. And in the US Milwaukee is way cheaper then in Bulgaria.
Parkside will never be a real competitor for Milwaukee. The difference in quality is just too big. Parkside might be good for light occasional use, nothing more.
Вы пытаетесь сравнить хобби и профи. Вот в реале если у кого-то машина лучше вашей тоже будете сравнивать? Parkside для дома, Milwaukee для стройки. Хотя знаю несколько людей которые даже на стройке используют Parkside brushless и не жалуются. Дело в цене и качестве. Кстати гарантия 5 лет всё решает.
Remember it's still a prototype , think it does very well and would undo most car bolts with easy👍 I have a milwaukee and would still buy a Parkside at that price
I think the most important part is... Who is working with the machines!!!! But Ofc Milwaukee is better quality I mean it cost more than double.... It always depends on what you wanna have and what you need to do. Especially hoe often you use it.
Колега я кажи на твоя човек да му сложат наковалня с дупка 1/4 на която може да се слагат битове като на китайските гайковерти за да избият рибата. Че тая машинка се е убила и за завиване на винтове. Иначе предполагам че може и да подготвят черен импакт на 12v. Машинката е много добра иначе.
За съжаление нищо не зависи от него. Но виж забравих да мерна диаметъра на наковалнята и дали е същия като на Milwaukee. Защото ако не се лъжа те имат няколко различни наковални за този модел ...
Parkside is not a tool to compare it to Mileaukee. It's a tool I must have, but not 4 use because the quality of the parts is terrible...short operating time.
Nice test mate. I have the Milwaukee 3/8 stubby and absolutely love it. This Parkside doesn't look too bad either, i'd still go with the Milwaukee personally but nice for people that dont want to spend the money and that are already on the Parkside battery system.
we would all go with the red one if money was no object :P i would if i used it more... but for how much i use the tools (a few hours a week at home) it dont make sens to go with the waukee
Drill- Packedge in typical box, came with a tool bag (added bonus), two batteries, one charger, drill, and driver. Two words "plenty of Torque" ruclips.net/user/postUgkxW1vOBRCMrgTCDEijzpVzDWsgI-Jm2iQv well I guess that's three. Nice upgrade from current setup. Has belt clips, I don't think I will be using those. Driver and drill were bigger than what I expected but it is an upgrade from the current setup. For the money I would say that this is a great setup for Professionals and DIY/Weekend warriors.
I bought an 18v and 12v parkside tool with batteries. And now I have the batteries, I pickup all the silly tools I see at Lidl because the bare tool offers can be quite seductive. Nail gun, bandsaw, paddle mixer, mini 12v angle grinder 1/2 inch 18v impact wrench.... And that is me on a Makita 18v and Metabo 18V platform.
Great video! I can't wait for this model to hit the stores, it should be worth it every penny. Keep up the good work 🙂
parkside is the top quality DIY tool, period
Can you compare this 12V Parkside Impact wrench with Parkside PASSK 20-Li? Im talking about Nm test.
I really appreciate your reviews, thank you
Glad you like them!
Good test The Milwaukee is the better one but it is also much more expensive and if you will use it only to change your tires twice a year. I would go for the parkside. As a professional I would go for the Milwaukee. I‘ve had the Milwaukee and it was very good but I swapped to the Hazet 9012M. The Hazet is much more fun but it‘s not mobile.
That wasn't a true test towards the end, because you did not re-tighten the nut to the original torque. The Parkside tool might have started to loosen the nut, making it easier for the Milwaukeeto undue, so, not a true and fear representation.
Parkside zaskoczył pozytywnie, depcze po pietach mistrzowi
🤣🤣🤣
Piłeś?Nie pisz...😂
Crazy when Parkside competes with Milwaukee:) For me Parkside is mostly good enough.
It sure is!
It looks nice on pootube, until it fails. Then you realise what those parkshit tools really are.
The fact that a 12V compact can take off a 600nm nut is unbelievable, even though its rated for only 340nm officially.
All depends on the joint. If those were rusty bolts good luck to take them off even with air powered impact tool 😂 But the fact is fact.
I own a 20v parkside combo drill, it's ok but it's very large and heavy, my milwaukee m12 gen 3 combi is actually just as good power and endurance, I've now converted to milwaukee m12 gear, everything is light and compact and doesn't what I need it to
Right on
Super jest ta seria peformance czekamy na tanie dobre narzędzia.
Určitě bych nechtěl stavět kvalitativně parkside vedle Milwaukee, ale musím uznat že se parkside celkem držel.
No ja osobne som ohromený, že dokážu vyrobiť stroj s takou silou na 12V batériu 😯
@@Pjotr1982 mam předělanou performance 18v z 6hranu na klasickou 1/2 ctverhran a takovouhle sílu nemá ani náhodou.
@@foogeesun5395 uz si ho skusal takto cez momentovy kluc? ja som ich uz prerobil tych utahovaciek aspon 50 kusov na 1/2 a zatial najvazsiu moznost som mal 420Nm otestovat a pri 420nm mal este celkom slusnu rezervu. tento test sa vola staticky a ono to kus inak funguje ked zatahujes takuto maticu a hned povolujes (mimo ine ta matica mohla mat kludne 70°C kvoli tym razom) inak to kus funguje keby to zatiahol na 400nm napr a povolil na druhy den.
@@xtp6969 nezkoušel,ale mám ho v práci na vlastní náklady v dílně(taková moje zkouška co vydrží v extrémních podmínkách) a maká každej den,máme v práci momenťák do 1000Nm ,tak klidně můžu vyzkoušet.
@@foogeesun5395 to by bolo super, ale idealne takto ako on po 50nm pridavat aby bola aj matica tepla
where did you find it?
you have a lot of parkside performance i cant find anywhere!
Superb test lad
Looks so close those power tools 👍
They are
cuz they are the same engine* open and check inside its same reference number LOL that why parkside ahs red color inside*
@@Pete1965 Really? I thought that Bosch has something to do with the Parkside tools. Checked TTI site and there is nothing about Parkside.
Здравей , дали може да споделиш ако имаш размерите на втулката или две втулки необходима и размер на наковалнята за преработването на В3 ?
When will this tool hit the market?
Can it remove rusted bolts on cars or is it not strong enough for that?
Nice but the same size like the 20v one..,?
I have a parkside tork rench but the charger is busted? And Leeds? Regards I'll really appreciate
hello can you tell me when it will be on sale thank you
it's clelarly by now, that there's some connections between this 2 brands (or manufacturers/brands behind them).
Do you have some info when it should be in production? Last time when you showed ratchet it was year to production.
I hope its not that long. But I have no information about that :(
Any ideea when will it arrive in shops?
Where did you get this parkside impact wrench?
It's prototype
Most likely in a dumpster.
After 8 months. Do we know the release date?
Sehr gute Test. Danke.
😄put a tie wrap on your newtown meter reader i got anxiety! haha
do the tests on the wheels of the trucks
What digital torque wrench do you have please?
The brand is KingTony
Yeah, will buy milwaukee, since I already have m12 tools
What price is the park side expected to be? Considering the new brushless 18v impact wasn’t exactly cheap for Parkside prices Amazon was retailing same price as Milwaukee 😂
Well you should source directly from Lidl, not amazon
@@icku agreed, just wondering what the price difference is going to be, and when the release will be… does a decent job keeping up with the M12
@@icku 699,00
zł I’m Poland 🇵🇱 which is £130 without charger and battery 🔋 considering Milwaukee can be purchased with 2v and 6v with charger for £180 if shopped around it’s worth considering if the UK lidl is going to sell it as a package with charger and battery and what that would cost
@@orleiv Unfortunately I have no info about the release date :(
The TQ WRENCH what BRAND and COST
No serán compatibles las baterías de 20v de parkside anteriores???
Este modelo es de 12V y por tanto usa las baterias de 12V de paekside.
Si quieres un atornillador de impacto para baterias dd 20V, lleva mucho tiempo en el mercado.
La de 12V es mas compacta, la de 20V es mas potente.
Thats how you test a cordless wrench, with a proper torque wrench and test the nm
When will it release? Can't wait need a date. I'll be there whole night like apple fanboys
Where can I buy this Parkside Performance key?
Nowhere, it is prototype w/o model markings.
@@ostravan where do you get the prototype from?
I WANT THE PARKSIDEEEE...!
made in what country?
These comparisons really entartain me... 🤣🤣🤣
Compare a price of those two wrenches Milwaukee is more expensive than a Parkside. Parkside is not for professional use they are hoby tools and those are not bad.
Whats the vibrations number
Wooo 600nm its big
There is no comparison between this brands, different worlds in therms of quality and comfort. And in the US Milwaukee is way cheaper then in Bulgaria.
how to buy?
M12 very good 👍
the original vs the copy parkside imitates Milwaukee without any shame
Skąd taki prototyp zdobyć ?
Trzeba czekać aż będzie w sklepie 😕 pewnie wcześniej będzie w Niemczech/Czechach
@@kaszubapiotr5122 znając życie pewnie tak tylko właśnie mnie ciekawi skąd ludzie biorą prototypy
@@warektv2624 przypuszczam że jakieś znajomości czy coś, albo ktoś kto nad tym pracuje/testuje
až na spracovanie plastov ktoré je u Parkside na nízkej úrovni nakoľko nepoužíva plasty vystužené sklenými vláknami.
Man did somebody copy someone else's homework
Parkside will never be a real competitor for Milwaukee. The difference in quality is just too big. Parkside might be good for light occasional use, nothing more.
Вы пытаетесь сравнить хобби и профи. Вот в реале если у кого-то машина лучше вашей тоже будете сравнивать? Parkside для дома, Milwaukee для стройки. Хотя знаю несколько людей которые даже на стройке используют Parkside brushless и не жалуются. Дело в цене и качестве. Кстати гарантия 5 лет всё решает.
Remember it's still a prototype , think it does very well and would undo most car bolts with easy👍 I have a milwaukee and would still buy a Parkside at that price
True but
If you look price parkside is perfect for people who do not need hig quality tool
Like homeovners and hobi users
I think the most important part is... Who is working with the machines!!!! But Ofc Milwaukee is better quality I mean it cost more than double....
It always depends on what you wanna have and what you need to do. Especially hoe often you use it.
@@nadneDonaDon cât are garanție Parkside și cât Millwaekee
SUPER TEST👏👌👍!
Колега я кажи на твоя човек да му сложат наковалня с дупка 1/4 на която може да се слагат битове като на китайските гайковерти за да избият рибата.
Че тая машинка се е убила и за завиване на винтове.
Иначе предполагам че може и да подготвят черен импакт на 12v.
Машинката е много добра иначе.
За съжаление нищо не зависи от него. Но виж забравих да мерна диаметъра на наковалнята и дали е същия като на Milwaukee. Защото ако не се лъжа те имат няколко различни наковални за този модел ...
Parkside is not a tool to compare it to Mileaukee. It's a tool I must have, but not 4 use because the quality of the parts is terrible...short operating time.
Contact
Just a cheap knock off
Rotten apples to oranges
TRUCK NUTS THAT WILL TELL YOU
Bisschen schwach die 2 😂😂 Hier mal was für Männer ruclips.net/video/0cAipC2_F34/видео.html
Parkside diy. Tool Milwaukee need to be up against makita , Bosch , AEG wolf etc