Thank you so very much. I will dial in the settings you provided. I will listen for the tone breaks and here at first I will dig the items I find to verify I am doing this correctly. After I am confident of my ability, I will change my digging habits. It is hot and humid here in Central Texas and the alkali black clay soil I am dealing with doesn't help either. I can't wait for somewhat cooler weather with some rain to moisten the soil. I hope to have more success now all thanks to you.
I’m way over in indiana and I’m sure my conditions are way different as well. I ran my anfibio in 3 tone with tone breaks at 18 and 61. In most cases around here I was able to run my gain at 91 to 96. 93 was kind of the sweet spot for me. Usually 14 kHz for me. No disc, no notch. Tone volumes I can’t remember for sure but I’m gonna say it was close to the super freaks. I have serious doubts there is anyone out there that puts the time in that Jeremy does. This guy is out there every day, for hours and hours, if anyone knows any tricks or tips on a machine, it’s him. I bought an equinox and sold my anfibio, kind of regret it but I still have the simplex so it’s all good. Good luck chip! All I can recommend is watch all of pay streak super freaks videos because he is the real deal.
Thank you for all the tips i have been using the Anfibio multi since September last year and i have yet to pull a silver coin i did a test hole the other day put a barber quarter 6 inches in the ground and my Anfibio could not see it i been hunting about 10 parks and 20 private permission and never found a silver coin i am goin to go test it tomorrow again and see if i can dial the Anfibio in to at least see it i been wondering if my machine was actually broke
The Anfibio does not like newly burried coins. I have found many silver dimes and quarters with the Anfibio over 6" deep. If I bury a dime at 6" deep in my hot soil not many machines will pick it up until after a few months. When coins sit in the ground for many years at 6" deep most machine will hit it. If you are finding other coins in your hunts at 6" deep your machine is doing its job. I can tell you 1 thing. When I got the Simplex. my deep silver count increased by 10X over the Anfibio. The Anfibio is more of a relic hunting machine than a park hunting machine. If you are stuck with just 1 coil, that limits your odds at getting silvers too. Keep on pushing on and maybe try to borrow a machine from a friend to see if you like a different machine other than the Anfibio too.
@@PaystreakSuperfreak yes it's not that it don't find things it loves pennies for some reason and i found a lot of relics i have two coils the standard and the kr24 i call it the sniper coil and i just ordered the round one like you use i was just wondering since i never found a silver coin yet in 10 parks and about 20 permissions it has also taken a long time to learn the machine i think i was a bit over my head when i got it since i never had been metal detecting before lol I have about 600 hours on it now and i am getting the hang of it (i think ) it has found me 700$ in clad coins this year so it's definitely finding stuff but no silver coins
@@theberkshiresmatreasurehun5337 Also, if the silver is that deep you don't want to use 3 tone mode unless you get the sensitivity up into the 90s. You'll walk right over it in most cases. You'll have to use a mode that's deeper by nature. 3 tone is like a park mode for modern trash. High recovery, low depth.
Hello, longtime Whites user, until this spring I got the Anfibio Multi. After about 250 hours using it, am finally figuring it out. Your videos help immensely. You are a good teacher. 👍 problem is, the last week my detector won't pick up a dime or quarter even on the surface, gives a scratchy tone and jumps with VDIs. I gave it several factory default resets but still not producing clear results. Any suggestions ?
Thanks for this very helpful video I set my first tone break to 19 in three tone mode and it does break up the foil. The only problem is that I'm from Canada and all our modern clad has a high percentage of steel in it, need I say more? Our newest dime comes in like small nails. Just one more thing, I own the anfibio 14 and when I turn it on, it's very chatty, but I do the frequency shift, so basically it becomes 14.5 and it quieter almost silent at 89 gain. Do you think I'm losing much depth when I do that? Any advice you give is always good so I'm all ears. If the new Nokta Makro MF that out Is good I may get that one after awhile, but I. Waiting to hear what you're going to say about it first!!!
Does 20 khz do good on deep coins? Man i bought an anfibio 19 and 14 for 238 a piece. The 19 is crazy deep in three tone with the sensitivity at 90 or above. Does the 20 khz hit coins good and deep?
I can only run the Anfibio in 20khz anyway because the lower frequencies do not perform well in my hot soil. The Anfibio has a very slow processor. Swinging slow is an absolute must if you want to hit deeper targets.
Take your small frequency shift, the one you'd change if there was someone else's detector giving your machine EMI and change it to point five, my anfibio 14 is as quiet as the grave when I do that.
I have very hot soil so many machines just go bat crap crazy when the ground is wet. Even the Deus 2 can be a struggle to dial into hot ground when the ground is very wet.
![[ANFIBIO] BEACH mode + Conclusion](/img/1.gif)
There aren't many videos with good info on the Anfibio. This was extremely helpful. I think it's a good machine but has a steep learning curve.
Glad it was helpful!
Thank you so very much. I will dial in the settings you provided. I will listen for the tone breaks and here at first I will dig the items I find to verify I am doing this correctly. After I am confident of my ability, I will change my digging habits. It is hot and humid here in Central Texas and the alkali black clay soil I am dealing with doesn't help either. I can't wait for somewhat cooler weather with some rain to moisten the soil. I hope to have more success now all thanks to you.
I’m way over in indiana and I’m sure my conditions are way different as well. I ran my anfibio in 3 tone with tone breaks at 18 and 61. In most cases around here I was able to run my gain at 91 to 96. 93 was kind of the sweet spot for me. Usually 14 kHz for me. No disc, no notch. Tone volumes I can’t remember for sure but I’m gonna say it was close to the super freaks. I have serious doubts there is anyone out there that puts the time in that Jeremy does. This guy is out there every day, for hours and hours, if anyone knows any tricks or tips on a machine, it’s him. I bought an equinox and sold my anfibio, kind of regret it but I still have the simplex so it’s all good. Good luck chip! All I can recommend is watch all of pay streak super freaks videos because he is the real deal.
Excellent explaination on how to adjust the tone breaks...I feel this will help me with my Nokta Impact..
This is Awesome. THANK YOU THANK YOU... I just got one. :) You Rock
Thank you for all the tips i have been using the Anfibio multi since September last year and i have yet to pull a silver coin i did a test hole the other day put a barber quarter 6 inches in the ground and my Anfibio could not see it i been hunting about 10 parks and 20 private permission and never found a silver coin i am goin to go test it tomorrow again and see if i can dial the Anfibio in to at least see it i been wondering if my machine was actually broke
The Anfibio does not like newly burried coins. I have found many silver dimes and quarters with the Anfibio over 6" deep. If I bury a dime at 6" deep in my hot soil not many machines will pick it up until after a few months. When coins sit in the ground for many years at 6" deep most machine will hit it. If you are finding other coins in your hunts at 6" deep your machine is doing its job. I can tell you 1 thing. When I got the Simplex. my deep silver count increased by 10X over the Anfibio. The Anfibio is more of a relic hunting machine than a park hunting machine. If you are stuck with just 1 coil, that limits your odds at getting silvers too. Keep on pushing on and maybe try to borrow a machine from a friend to see if you like a different machine other than the Anfibio too.
@@PaystreakSuperfreak yes it's not that it don't find things it loves pennies for some reason and i found a lot of relics i have two coils the standard and the kr24 i call it the sniper coil and i just ordered the round one like you use i was just wondering since i never found a silver coin yet in 10 parks and about 20 permissions it has also taken a long time to learn the machine i think i was a bit over my head when i got it since i never had been metal detecting before lol
I have about 600 hours on it now and i am getting the hang of it (i think ) it has found me 700$ in clad coins this year so it's definitely finding stuff but no silver coins
@@theberkshiresmatreasurehun5337 Also, if the silver is that deep you don't want to use 3 tone mode unless you get the sensitivity up into the 90s. You'll walk right over it in most cases. You'll have to use a mode that's deeper by nature. 3 tone is like a park mode for modern trash. High recovery, low depth.
Hello, longtime Whites user, until this spring I got the Anfibio Multi. After about 250 hours using it, am finally figuring it out. Your videos help immensely. You are a good teacher. 👍 problem is, the last week my detector won't pick up a dime or quarter even on the surface, gives a scratchy tone and jumps with VDIs. I gave it several factory default resets but still not producing clear results. Any suggestions ?
Take your coil cover off and clean the dirt out. If that does not work, shoot me an Email at paystreaksuperfreak@gmail.com we will figure it out
Awesome advice!!
Glad it was helpful!
Thanks for this very helpful video I set my first tone break to 19 in three tone mode and it does break up the foil. The only problem is that I'm from Canada and all our modern clad has a high percentage of steel in it, need I say more? Our newest dime comes in like small nails. Just one more thing, I own the anfibio 14 and when I turn it on, it's very chatty, but I do the frequency shift, so basically it becomes 14.5 and it quieter almost silent at 89 gain. Do you think I'm losing much depth when I do that? Any advice you give is always good so I'm all ears. If the new Nokta Makro MF that out Is good I may get that one after awhile, but I. Waiting to hear what you're going to say about it first!!!
at 89 gain in three tone you never had much depth to lose honestly.
Does 20 khz do good on deep coins? Man i bought an anfibio 19 and 14 for 238 a piece. The 19 is crazy deep in three tone with the sensitivity at 90 or above. Does the 20 khz hit coins good and deep?
I can only run the Anfibio in 20khz anyway because the lower frequencies do not perform well in my hot soil. The Anfibio has a very slow processor. Swinging slow is an absolute must if you want to hit deeper targets.
Take your small frequency shift, the one you'd change if there was someone else's detector giving your machine EMI and change it to point five, my anfibio 14 is as quiet as the grave when I do that.
I have very hot soil so many machines just go bat crap crazy when the ground is wet. Even the Deus 2 can be a struggle to dial into hot ground when the ground is very wet.
Is there any way to make nickels have a high tone through the tone break?
There is a way but is makes the detector very unstable. Broken tone very bad.
I run mine mostly in 5mhz.. Most of my spots are all 6"+ targets.. And in 5 tone
5khz does not perform well in my mineralized soils. 5 tone is very unstable too. 3 tone is stable at 20khz 89 gain in my soils
The sound will be changed after gr balance and with the increase of depth all the rings would sound bad
Be careful