How to retrofit CarPlay and Android Auto on a Mercedes Comand NTG2.5

Поделиться
HTML-код
  • Опубликовано: 20 июн 2024
  • This is a guide on how to retrofit CarPlay/Android Auto on a Mercedes COMAND NTG2.5.
    Useful links
    - Kufatec Video in Motion adapter: kufatec.com/en/video-in-motio...
    - Audio AUX adapter: www.jtaudio.net/product/merce...
    - NAVINC AppPlay CarPlay/Android Auto interface: www.navinc.nl/5-navplay-carpl...
    Music: • 🍀 Chill Instrumental [...
  • Авто/МотоАвто/Мото

Комментарии • 9

  • @anhkhoi158
    @anhkhoi158 Месяц назад +1

    omg tysm, it’s a little bit complicated but I would try to get it :>

    • @ntinos208
      @ntinos208  Месяц назад

      The difficult part is getting someone to do the coding with vediamo, if you don’t have a sdconnect. If you do this first, everything else is very doable.
      For me it was easier because I had sdconnect

  • @jan6553112257665
    @jan6553112257665 Месяц назад +1

    Great video. Which connector does the knob have? Maybe if you put an caraudio-systems module and the can box tv 500 in between you can use the ntg button instead the knob.

    • @ntinos208
      @ntinos208  Месяц назад +1

      Thank you very much😁 The knob connects to the carplay interface directly.
      My first attempt was with the module from caraudio-systems, but I had no video. Maybe the adapter was faulty because it was new old stock.
      I contacted caraudio-systems and sadly they don’t sell this adapter anymore.
      That’s why I made my own.
      Also I believe that the knob is faster when you control carplay, instead of having the factory buttons to navigate inside carplay.

    • @jan6553112257665
      @jan6553112257665 Месяц назад +1

      @@ntinos208 oh I didn’t noticed, that they don’t sell it anymore. I was interested to try it in my w211. However I will give a try with this knob. Thanks a lot.

    • @ntinos208
      @ntinos208  Месяц назад

      @@jan6553112257665 if you don’t want the knob you can try converting to touchscreen. Some carplay interfaces support a touchscreen film. The navinc appplay that I used, supports it 100%. So you could get the screen of the COMAND out, stick on top of it the film and connect it to the carplay interface.

  • @ntinos208
    @ntinos208  Месяц назад

    The links in the description will be available in 24 hours, because YT does a verification thing 😃

    • @emret5730
      @emret5730 Месяц назад +1

      You are a genius, but this is expert level. Where are you located?

    • @ntinos208
      @ntinos208  Месяц назад

      @@emret5730 It was difficult to find the way to do this retrofit but the steps are pretty simple i think 😁I am located at Greece.