@@HA7DN the wattage doesn't make a difference, wattage of a bulb is how much it resists mains voltage, the high voltage plasma globe sends current through the gas inside the bulb rather than through the filament. A 1000w bulb wouldn't be any different than a 10w bulb.
Nice video Can you explain me how to make the circuit of plasma ball and about the Transformer uses in this. Voltage and current ratings and what is the use of Transformer in this circuit. And
Well, a lightbulb is a conductor so if you connect it like that, then it is not going to work. I think you just need to connect one of the wires of the transformer to the lightbulb base. The other wire should be hanging in air.
@@two_number_nines it's not an ignorant opinion, it's fact. I gladly do these projects myself but that's because I'm trained how to understand these circuits, doesn't change that for most anyone it's dangerous and deadly.
A lâmpada de plasma ficou legal. Parabéns! Rio de Janeiro RJ Brasil
Nice video. How to make a plasma ball driven by AC signal (20,000-180,000Hz)?
Please tell us which type of bulb you use
I have made this with tesla coil designed by me with a 100w bulb as top load of secondary coil. The result is awesome
Sambhunath Chatterjee I wanna see that, please make a video
I done it with a 1000W bulb... I guess I will make a bigger tesla.
@@genesssisss Ya sure
@@HA7DN the wattage doesn't make a difference, wattage of a bulb is how much it resists mains voltage, the high voltage plasma globe sends current through the gas inside the bulb rather than through the filament. A 1000w bulb wouldn't be any different than a 10w bulb.
@@platinumsky845except size. A 1000W lightbulb is bigger and thus makes a fancier display.
whats the difference here that makes the light blue and touchable? its the same thing.
Can i use led driver to drive the flyback
Please give me the list of this
I want to drive this circuit with a frequency generator. Is it possible here?
Nice video
Can you explain me how to make the circuit of plasma ball and about the Transformer uses in this. Voltage and current ratings and what is the use of
Transformer in this circuit.
And
where will the HV ground wire from flayback will go
Lukas Norkus no where
The two wires from the hv transformer u connect it at the two end of the bulb or one at the end and other at the side
Well, a lightbulb is a conductor so if you connect it like that, then it is not going to work. I think you just need to connect one of the wires of the transformer to the lightbulb base. The other wire should be hanging in air.
Beauty demands victims.
lol
If you are stupid or don't know what you are dealing with these things could kill these persons
Sir can u tell us items
"Beauty demands Victims"
-*JHIN THE VIRTUOSO*
Is your electronic transformer produces 12V DC or 12V AC?
Probably DC because cheap transformers don't have a converter.
Please make that with bug zapper
Всем этим я баловалсяв в нач. 90х
where will the hv ground wire from flybaack will go
to your body, make sure you are standing in water
If you put a fluorescent lamp near, it will light up????
Umnnnn
it will
Can u write the things u used in this 1 is bulb and 2nd is capacitor and the other plzz send me the proper name of those things
This shit is insanely dangerous and by no means cheaper than $12, you can buy a safer complete and easier to use plasma ball for like $12-15
thanks
Kasyan TV i advice you to put tags in this video.then your views will increase.you made only 1.20$ with this video.
You can get these for $5 and they are much better...
you dont know the beauty of diy
agree
well DIY can be good sometimes, but if you use *HOT GLUE* to assemble it, it is not *beauty* anymore. Hot glue makes everytihng ugly
@@Sharpless2 Not if you can't see it. *strut snapping in the background*
@@shimmysham8725 lmao
Mine blow up
I dont think this is a safe project to do at home...
Then dont watch the video and let people who know what they are doing have fun. dont post uneducated opinions pls
danijel124 everything is safe if you know what you are doing😎😎
danijel124 pogo is safe
@@two_number_nines it's not an ignorant opinion, it's fact. I gladly do these projects myself but that's because I'm trained how to understand these circuits, doesn't change that for most anyone it's dangerous and deadly.