I work at a joann fabric and craft, I recommend this channel to every single customer who buys a machine from us because it helped me learn everything I needed when i started sewing a few months ago. :)
Hello Sara. In 2016 I came across your videos and they helped me learn to sew on my first machine Brother cS6000i. Thanks for helping, inspiring, and teaching so well!
Thank you for your wonderful sewing tips ❤ After watching your videos, I have realised that it is the way I am threading my machine which is causing all the looping underneath my fabric and NOT tension issues. I was beginning to give up on my sewing hobby, but you have inspired me to carry on. Thank you so much 👏🏽 xXx
I sure wish that I had found this information a few years, and a few sewing machines, ago! I’m now frequently recommending your channel to my sewing buddies!
Love your videos. I have a question- My stitch shows up on the under side on my Singer Heavy Duty Sewing Machine (same grey one you have). The nice side is underneath and the top part shows the wrong side of the stitch. It is very annoying.
Im brand new and just bought the singer 1304. Everyone says when im done stitching, turn the dial so the needle is at the highest position ,indicated by the metal piece sticking up on top. but when i clearly see my needle at its highest position, its not when the metal is sticking up, its back inside.. my needle is on its way back down if i stop when the metal piece is sticking up.. can you clarify this for me?
My brand new singer c729q is stopping and other times running without being touched. Like its possessed LOL any advice on which direction should I go. I bought at joannes and they said only singer but no one at singer is available to advise. any advice?
Question I recently got a singer traditional 2277 sewing machine and I do clean it and did a couple of projects on it already and I'm having problems with back and forth thread & on the back the threaded bunchs up a lot and then sometimes it breaks. what would be the problem with that? Please help. Thank you. Take care & stay safe.
I have one of those to and sell them lots at my job, i had my thread keep braking because things were to tight in the width and tension also i needed better thread i needed 4-5$ thread instead of my 99¢ stuff.
@@kitten141234 hi. I buy 3.00 $ or more on my thread. I was lookin at my thread it look more silky then smooth kind. I think that might be the problem. My sewing machine is brand new. 😊 my first sewing machine too. I want to keep great shape. Thank you. 😁 take care & stay safe.
You have probably done these things, but if not--1. Change top thread, make sure bobbin is wound well (not loose, or too ful). 2. Retread , top and bobbin thread. 3. Change needle it could be damaged. 4.Clean out bobbin area, check for fuzz, pieces of broken thread. 5. Be sure needle, thread, and stitch are for type and weight of your fabric. If still problem search for help on you tube. Good luck and I hope you get your new machine working.
I work at a joann fabric and craft, I recommend this channel to every single customer who buys a machine from us because it helped me learn everything I needed when i started sewing a few months ago. :)
Thanks for sharing!
What sewing Singer machine wood do you recommend am looking at the 4452.
Hello Sara. In 2016 I came across your videos and they helped me learn to sew on my first machine Brother cS6000i. Thanks for helping, inspiring, and teaching so well!
Not only was this video informative, but she was fun to watch! I laughed out loud a few times 😄
Thank you for your wonderful sewing tips ❤ After watching your videos, I have realised that it is the way I am threading my machine which is causing all the looping underneath my fabric and NOT tension issues. I was beginning to give up on my sewing hobby, but you have inspired me to carry on. Thank you so much 👏🏽 xXx
I sure wish that I had found this information a few years, and a few sewing machines, ago! I’m now frequently recommending your channel to my sewing buddies!
Glad it was helpful!
Thank you so much for these videos! They've helped my partner and I as we trouble shoot different projects and continue to come back to them.
These videos are important to me and since I am new to sewing I love them and glad to see them offered.
Thanks!
Love Love LOVE your videos! I would have quit learning to sew if it hadn't been for your Singer Confidence videos! Thank you so much!
Thank you so so much for your videos. ❤❤❤❤❤
If anything this helped remind me to change my needle. Being able to poke my finger with said needle without too much pain… yeah time to switch it out
You mention that the Singer 9960 will do the Viking feet now. Where are your online classes? For the Viking feet and do you do project sewing
This video was really helpful for me! Thank you! ❣️
Glad it was helpful!
we love you limitlessly
Great videos!!!!!! Love your channel!!!
I have so much thread to throw away! Thank you!
Love your videos. I have a question- My stitch shows up on the under side on my Singer Heavy Duty Sewing Machine (same grey one you have). The nice side is underneath and the top part shows the wrong side of the stitch. It is very annoying.
Thanks for the video 😊
Please can u help me, my machine got stuck while zig zag stitching (the needle hits the bobbin case) what should i do???
Im brand new and just bought the singer 1304. Everyone says when im done stitching, turn the dial so the needle is at the highest position ,indicated by the metal piece sticking up on top. but when i clearly see my needle at its highest position, its not when the metal is sticking up, its back inside.. my needle is on its way back down if i stop when the metal piece is sticking up.. can you clarify this for me?
Thank you got my question answered
Happy to help
I just got a Singer 4452 and I’m wondering if I can use a large spool thread like what is used on Sergers.
My brand new singer c729q is stopping and other times running without being touched. Like its possessed LOL any advice on which direction should I go. I bought at joannes and they said only singer but no one at singer is available to advise. any advice?
Seems like Singer has the same machines from 6 yrs ago. If I buy one now has it been sitting on a shelf all this time?
How do I find out what bobbin to use?
Singer stylist 7258 & singer Promise 1409
What size and material thread should be used for leather? I'm using a 3 Oz. Leather
Just purchased a 4423 model singer. Is there any way to make the straight stitch longer than a # 6 like for basting?
How do i open the extension table
You look real good
Hi!!! I have the singer heavy duty machine, and I'm having problem sewing thin fabric. Can You help me?
Nice
Good to know
Question I recently got a singer traditional 2277 sewing machine and I do clean it and did a couple of projects on it already and I'm having problems with back and forth thread & on the back the threaded bunchs up a lot and then sometimes it breaks. what would be the problem with that? Please help. Thank you. Take care & stay safe.
I have one of those to and sell them lots at my job, i had my thread keep braking because things were to tight in the width and tension also i needed better thread i needed 4-5$ thread instead of my 99¢ stuff.
@@kitten141234 hi. I buy 3.00 $ or more on my thread. I was lookin at my thread it look more silky then smooth kind. I think that might be the problem. My sewing machine is brand new. 😊 my first sewing machine too. I want to keep great shape. Thank you. 😁 take care & stay safe.
You have probably done these things, but if not--1. Change top thread, make sure bobbin is wound well (not loose, or too ful). 2. Retread , top and bobbin thread. 3. Change needle it could be damaged. 4.Clean out bobbin area, check for fuzz, pieces of broken thread. 5. Be sure needle, thread, and stitch are for type and weight of your fabric. If still problem search for help on you tube. Good luck and I hope you get your new machine working.
Use Gutterman thread.
I had these issues, and when I went with a very good quality thread, the issues went away.
How to oil your 5542
I have a new singer fasion mate 3342 but it won't pick up thread from the bobbin what am I doing wrong?
Mam The designs screw got stuck up Can you help me mam
I have done everything that the videos tells me how to correct loop stitches on the bottom of the fabric. Nothing works. Help !