Jeep jk synergy drag link end replacement

Поделиться
HTML-код
  • Опубликовано: 30 сен 2024
  • replacing 3 yr old #synergymanufacturing #draglink #tierodends

Комментарии • 9

  • @randygarcia4831
    @randygarcia4831 8 месяцев назад

    If you are going to use a pickle fork make sure you use the right tool, he should have used the tool that has a long extension handle which adds weight so that when you hit it properly it will actually pop off!!!!!!
    There is also a pitman arm puller!!!!!!!!

  • @elguapo7722
    @elguapo7722 Месяц назад

    How do you adjust the Synergy drag link to straighten the steering wheel? I used to do it on the factory one but this one is different. Do you you have to loosen the jam nut on the passenger side as well as the collar nut and bolt to turn the entire thing??

    • @queble11
      @queble11  Месяц назад

      @elguapo7722 if I remember right you adjust the ends till its close. Then there should be a adjustment nut then lock it down once wheel is straight. Do remember having to play with it till wheel was straight

  • @L13-c7x
    @L13-c7x Месяц назад

    Where did you get the drag link ends?

    • @queble11
      @queble11  Месяц назад

      @@L13-c7x synergy manufacturing or amazon

  • @SleepingNinja1265
    @SleepingNinja1265 9 месяцев назад +1

    When the drag link end is under pressure from the pickle fork hit the pitman arm on the side or front and it should release

  • @silverc3057
    @silverc3057 2 года назад +1

    I am dealing with this exact issue 😂 I couldn’t remove the pitman arm drag link side. I need to try adding heat tomorrow or I need to go buy a wedge 👍 thanks for the video

    • @queble11
      @queble11  2 года назад +1

      Hope you got it squared away man, they can be stubborn to get off.

    • @RealUnknownGamer827
      @RealUnknownGamer827 11 месяцев назад +1

      Scraping off the boot and hitting with a wedge on driver side and from the passenger side can get it out but yes took alot of troubleshooting 😅