This mill produce the dust you can use on a sandblaster. From kinda any scraps you have in your yard. So.. i take those $100 and use them for anything else.
@@expressionoffreedom7165 Then keep you oxigen mask on.. even when you sleep.. that way you do not breathe any dust..and you have clean lungs.. lol.. are you for real right now?
Or touch bare handed. I have a big issue with the design of the door being flat, requiring several cycles to empty and agiitate the dust into the air. With something like this, it would be far better to be belt driven directly onto the drum, and have the dump door on the end, that could be tipped directly into a bag and graders, in a much more sealed and controlled process. It also wouldn't have required nearly as much fabrication work.
awesome as always! if you add two ramps inside, everything will fall on the side hole easier without getting caught on the lateral pouches inside next to the lid
I just want to say out of all the wielding videos I have seen yall are spot on with adding the wielding helmet when doing the close up shots. Good work on the video
Very Nice, I'm from Brazil and now I subscriber for your channel. I'm a graduate of Metallurgical Engineering and what I have to say is the things you control are incredible. Congratulations and keep up the good work. I apologize for my English, I'm still learning.
your cam did an excellent job filming the welds. as a viewer learning welding via youtube.. i can actually see what you did and that helped me tremendously. thanks
Usually, most people use these with ceramic or rock media, either for polishing the metal or "stonewashing" after acid washing.... I have a Tumbler, but it vibrates instead of rotating...leave a really nice texture to the blade...
One of the best channels on youtube. Handsdown. Creative, educational and exciting. Not a small feat to accomplish. Thank you for providing us great content.
Качество съёмки выросло, больше света. Пыль, любая, опасна для жизни! Тем более стекло и метал. Почему для дверцы не использовать вырезанный фрагмент? Если ребра внутри разместить как две встречные спирали, то эффективность возрастёт. И выгрузка станет легче, спираль будет сбивать пыль к центру. Алюминиевая пыль может и бомбануть:)
That is the perfect device for remaining flashing, rust and paint from items. That is until you you guys design your own steel shot blaster. You guys have forgot more than I know about fabrication, designing and building. Just keep posting to help my poor old brain to remember some of this.
It was possible down the concrete mixer cover to [zdelat] the same [efekt] would be I tumbled rocks in a Harbor Freight concrete mixer and after a month the sides bulged out after 2 months the bolts holding the 2 haves together gave way
Well, that was... wow, I am not sure what to say. I am kind of caught between "I could listen to those same three measures of music for another 11 minutes and 26 seconds" and "the whooshing zoom in transitions really turn a ball mill into an EXTREME ball mill".
great job! I see you guys building possibly building a kiln and a forge in order to maximize the potential for that ball mill. the possibilities are endlessssssss!!!!!!!!
So i read from another comment, (so i don’t know if this is true or not), that it grinds up metal shavings into a sand like powder that is used for sand blasting.
I especially liked the POV (point of view)welding shot very nice a more jumbo version of King Of Random without all the commentary to of my favorite channels now 👍👍👍👍👍👍
just remember not to leave it running too long with airfloat ali powder (it must be opened and aired periodically) .......if it uses all the oxygen in the tub while milling it can oxidize on contact with air (important note once fine enough it gets even less stable!!!)........... with a ball mill that size that is goodbye workshop
He needs about 10 times the ball bearings for it to be efficient. I hope he listens to you, or, knows about how dangerous ball milling certain metals are!!
I watched out of curiousity as years ago I worked for a large copper company that had massive ball mills to grind the ore into powder before it was fed into the flotation tanks to extract the copper. Very cool.
There are a some mistakes. Ribs inside: as you can see, balls ctick on ribs, and can make a sparks when falling down. They should roll. Doors: have a blind pockets, you cant clean out all your grinded material. Before grinding other kind of material, you should hard work for cleaning. But looks nice, same as original ball mills! (Have experience with ball milss from 1liter up to 3 cubic meters.)
...tutti i video sono bellissimi ed entusiasmanti!!! Ho osservato questo attuale e se non mi sbaglio, si dovrebbe trattare di un "mulino"....anche se ciò che esce non è farina! Quando lavoro, spesso sbaglio facendo misure precise: questi ragazzi come fanno a...beccare sempre giusto anche quando tutto sembra....sommario...? Un dono di natura, sicuramente... ;-) Congrats!! Lello - Italy
That thing is definitely professional, but I would be very careful about milling certain metal powders in a steel mill with steel grinding media. One spark and the whole shop blows up.
I thought of two applications for this to justify wanting to make one myself: cleaning off brass cases for reloading ammunition (shooting on a range with friends = lots of ammo to clean and reload, though I would need a much finer medium for brass casings) and for grinding down steel steel chips from the lathe/mill to make casting ingots easier. Fine powder means less heat needed, which makes ingot-making that much faster.
I recall using walnut shell with a bit of red rouge in the one I made. I started with a small black rubber/plastic tub, but then went to a six-sided plywood container that held several times as much. Was processing more cases for the Dillon press, then.
My neighbors would love if I had one of these!
Just be sure to keep it running continuously through the night!
I think I’ll build one anyway. Payback for when I’m trying to sleep during the day. I think they mow their grass every 48 hours.
@@patricksanders858 specially in weekends !
I think they would love too a Bell and something tied to IT so the wind hit and make IT bell
get an old Harley it has the same effect
Who else watched this entire video without knowing what the heck a "ball mill" was?
I still have no clue.
They're for making fine dust from steel or glass for surreptitiously murdering people, I think
@@smokingskill They're obviously noise makers.
So a giant rock tumbler 😃
It's a nice gadget you can create a video about.
I'll take "The sorts of dust you don't want to breathe" for $100, Alex.
This mill produce the dust you can use on a sandblaster. From kinda any scraps you have in your yard. So.. i take those $100 and use them for anything else.
Great point made...
You don't want to breathe any kind of dust.
Everything that isn't clean air is bad for your lungs.
@@expressionoffreedom7165 Then keep you oxigen mask on.. even when you sleep.. that way you do not breathe any dust..and you have clean lungs.. lol.. are you for real right now?
Or touch bare handed. I have a big issue with the design of the door being flat, requiring several cycles to empty and agiitate the dust into the air. With something like this, it would be far better to be belt driven directly onto the drum, and have the dump door on the end, that could be tipped directly into a bag and graders, in a much more sealed and controlled process. It also wouldn't have required nearly as much fabrication work.
awesome as always!
if you add two ramps inside, everything will fall on the side hole easier without getting caught on the lateral pouches inside next to the lid
Like the inside of a concrete truck?
Awesome build! Looks like it could use a magnet dish on the side for the bolts you use for the door! Keep up the awesome work!
Φίλε, πολύ καλή δουλειά, ένα σπάνιο είδος καναλιού για το ελληνικό youtube 👍🇬🇷
I just want to say out of all the wielding videos I have seen yall are spot on with adding the wielding helmet when doing the close up shots. Good work on the video
Just a note, no one that likes this kind of video likes this kind of music. The sounds of the shop is the music of life.
Very Nice,
I'm from Brazil and now I subscriber for your channel. I'm a graduate of Metallurgical Engineering and what I have to say is the things you control are incredible. Congratulations and keep up the good work.
I apologize for my English, I'm still learning.
Victor Diego Thank you very much! :)
Great english .
You guys do some of the sickest projects! Props
Thank you my friend!
The vice that held the tank in the beginning was the best part
That vice is the SH1T
I noticed it too! Awesome!
I'm Brazilian and I admire this channel a lot in the next video for min.
Nice! You got more tools than most of the employers
your cam did an excellent job filming the welds. as a viewer learning welding via youtube.. i can actually see what you did and that helped me tremendously. thanks
Hey with that I can make my own glass and metal blast media for removing paint and rust.
i figured he was going to mix glass and aluminum and make transparent aluminum:)
Exactly how we made it at Washington Mills. Aluminium Oxide run through a ball mill
It doesnt matter what the machine can do. It matters how its made. Impressive once again.
0:58 when you realize that his saw is nothing like your harbor fraight one.
hey man there are some gems in hazard freight, u just gotta be carful and realizze the good ol sayin. u get what u pay for
Very good! This equipment is sensational, has a thousand and one utilities. Congratulations Make it Extreme!
Very practical and clever build brother I love it as always.
Thank you brother!
I have a feeling something in the future will be blown up, and it will be EXTREME EXPLOSIONS!!!
Awesome... what is its purpose? Nicee
grinding
Usually, most people use these with ceramic or rock media, either for polishing the metal or "stonewashing" after acid washing.... I have a Tumbler, but it vibrates instead of rotating...leave a really nice texture to the blade...
Actually, I just found out they can be used for grinding too, learn something new every day...
You use a ball mill to grind things down to a fine powder.
Guess that a lot of thoose chips are aluminium. Why don't you melt them into ingots for future used? :)
I was intending to make a mill like this and your video helped me a lot....you deserve tons of likes
He really deserves
One of the best channels on youtube. Handsdown. Creative, educational and exciting. Not a small feat to accomplish. Thank you for providing us great content.
Thank you very much! :)
ya your mom is excellent at it. Unfortunately you were conceived in the process. What a waste of a human life.
Estos tutoriales de fabricación se herramientas me gustan bastante, me ayudan cuando las necesito, me gusta.
Me : Har NO idea what a "ball mill" is.
Also me: Watches for 11 minutes. "Clearly I need one"
lmao xD
That would be a great abrasive cleaner for old rusty parts!!! Awesome work Bro!!!
Качество съёмки выросло, больше света. Пыль, любая, опасна для жизни! Тем более стекло и метал. Почему для дверцы не использовать вырезанный фрагмент? Если ребра внутри разместить как две встречные спирали, то эффективность возрастёт. И выгрузка станет легче, спираль будет сбивать пыль к центру. Алюминиевая пыль может и бомбануть:)
Вячеслав Попов А что это вообще за шайтанмашина получилась? Зачем она?
@@santanic78 шаровая мельница
@@santanic78 такими обожжённую известь измельчают, это к примеру.
@@VladimirZaburdaev А куда потом металлическая и стеклянная пыль идет?
Василий Пупкин может на пескоструйку или в переплавку
Good thing you have all those cool tools you made so that you can make all that other cool stuff.
Wow, the camera shot at 1:28 was on point mate ! best regards from France
You got a new subscriber when you tossed aluminum scrap into the ball mill.
Always inspiring people with great ideas! Keep going! good job💪
Thanks dude!
A smaller version would be nice for my shop 👍👍👍👍👍. Excellent video...... good welder too........
nice
That is the perfect device for remaining flashing, rust and paint from items. That is until you you guys design your own steel shot blaster. You guys have forgot more than I know about fabrication, designing and building. Just keep posting to help my poor old brain to remember some of this.
I'm sure I dont need to tell you, absolutely do not breath that dust. A funnel on a shop vac setup near the dump pan would make a huge difference.
Another great video! You must be an expert at threading with your lathe by now! I always love your videos!
It would be good to show what the ultimate purpose of this machine is.
All we are is dust in the wind
Grew up around welding.. Just seeing the bare welding arc on screen triggers my instinct to look away or close my eyes xD Great build too!
Можно было на бетономешалку крышку зделать тот же эфект был бы
неееее, слишком просто)))
@@olexandrsavenko9836 The man he says "nooooo, too simple)))"
It was possible down the concrete mixer cover to [zdelat] the same [efekt] would be
I tumbled rocks in a Harbor Freight concrete mixer and after a month the sides bulged out after 2 months the bolts holding the 2 haves together gave way
nice weld.looks like it was hot enough. im impressed.
Well, that was... wow, I am not sure what to say. I am kind of caught between "I could listen to those same three measures of music for another 11 minutes and 26 seconds" and "the whooshing zoom in transitions really turn a ball mill into an EXTREME ball mill".
great job! I see you guys building possibly building a kiln and a forge in order to maximize the potential for that ball mill. the possibilities are endlessssssss!!!!!!!!
Before video: "I have no idea what a ball mill does!"
After video: "I have no idea what a ball mill does..."
So i read from another comment, (so i don’t know if this is true or not), that it grinds up metal shavings into a sand like powder that is used for sand blasting.
I especially liked the POV (point of view)welding shot very nice a more jumbo version of King Of Random without all the commentary to of my favorite channels now 👍👍👍👍👍👍
Now it's time to Make it Extreme - Thermite Edition :D
And flashbangs
برنامه ای بسیارعالیست همه چی داره چیز یاد میگیرم. حال هم میکنم لازم که باشه سئوال هم میکنم مثل دیگران. ممنونم همیشه
Great stuff....excellent....!!! Continuous that way....!! I learn a lot from you...make it extreme. From Argentina.
Dario Rodriguez take a look at my ball mill ruclips.net/video/Xyt1qSj-krc/видео.html
Can't beat those dollar store splatter screens for fine sifting!
just remember not to leave it running too long with airfloat ali powder (it must be opened and aired periodically) .......if it uses all the oxygen in the tub while milling it can oxidize on contact with air (important note once fine enough it gets even less stable!!!)........... with a ball mill that size that is goodbye workshop
He needs about 10 times the ball bearings for it to be efficient. I hope he listens to you, or, knows about how dangerous ball milling certain metals are!!
I always enjoy your creativity. Simple but effective.
Great work, great editing.
Here's a new subs.
Thank you! :)
I love seeing things you made used to make new things. I wish some of these things you make could be mass produced with the same quality.
Your welding abilities keep improving at every new video! Congratulations!
Very impressive building ! And the song is very good 😀
Next will be Extreme Thermite!
I was wondering why anyone would put metal shavings in a ball mill. Only one reason comes to mind
andy d Yeah, to turn them into powder.
You could also sell powdered aluminium for example ( whale aluminium shavings are worth next to nothing).
KaliyaK %
Jean-Pierre BABUT $
I watched out of curiousity as years ago I worked for a large copper company that had massive ball mills to grind the ore into powder before it was fed into the flotation tanks to extract the copper. Very cool.
iron powder and bad ventilation! yeeee
I liked the camerawork with the welding :)
The Rust Admin so did I
There are a some mistakes.
Ribs inside: as you can see, balls ctick on ribs, and can make a sparks when falling down. They should roll.
Doors: have a blind pockets, you cant clean out all your grinded material. Before grinding other kind of material, you should hard work for cleaning.
But looks nice, same as original ball mills!
(Have experience with ball milss from 1liter up to 3 cubic meters.)
...tutti i video sono bellissimi ed entusiasmanti!!!
Ho osservato questo attuale e se non mi sbaglio, si dovrebbe trattare di un "mulino"....anche se ciò che esce non è farina!
Quando lavoro, spesso sbaglio facendo misure precise: questi ragazzi come fanno a...beccare sempre giusto anche quando tutto sembra....sommario...? Un dono di natura, sicuramente... ;-)
Congrats!!
Lello - Italy
Some of the coolest videos on the web.....honest.
Glad I subscribed.
Thanks
Eric, central Florida
Thank you so much! :)
Very useful, there should be one in every house.
Cool! Best regards from Russian Far East ))
Tgyyh
I can't even imagine how loud that is in real life! Nice work! I'm assuming for media blasting?
Proud for you baby ❤❤ nice work.!!awesome video 😄😄😄
Ωπ, έλα ρε πατριώτες.
Τόσα βίντεο έχω δει και δεν ήξερα ότι είστε στην Κύπρο!
Τις καλύτερες ευχές από Αθήνα.
Are you his girlfriend?
??
DSG why you ask.?
Polina Christodoulou I'm sorry if I offend you.
I asked because you said 'BABY' so I guest meaby he is in relationship with you.
DSG it's okay. Nothing bad.! Yes he is my boyfriend :)
LOVE watching your channel. Keep up the great videos and thanks!
make a wire stripper next time please!
That's perfectly edited and put together. 👏
entertaining...love the craftsmanship!
Those welds are beautiful
Finer it is the better , Tungstun carbide half 5 gallon pail is about $750
Garnett M take a look at my ball mill ruclips.net/video/Xyt1qSj-krc/видео.html
You’re amazing man god keep you in safe and your crews peace upon you. I am watching your channel from iraq 🇮🇶 from beginning
Great idea ! My best videos maker. Pro work🔧🔨
Them things inside the mill shore are having a ball!
Very very good!!!
Thanks!
best channel on youtube
man I hope you guys were wearing respirators.
And earpro!
And washed out the unit before cutting
and wore 2 condoms
mother on speed dial
Gloves
Your wald job is really good
That thing is definitely professional, but I would be very careful about milling certain metal powders in a steel mill with steel grinding media. One spark and the whole shop blows up.
Aka aluminum.
Nice. Not useful everyday but can be a good asset to have.
Awesome project my brother I like it good job later :)
Thank you!
Excellent video, great project. It would be good to see the tank being purged with water prior to cutting into it.
Another nice project from you. Hmm...I suspect you're about to make termite...or why the need for aluminum powder?😉
DIY Railway.
Kalle Klæp termite? Or thermite?
Oh sorry...of course it's thermite. In my language, it's written without the h. That's the problem with having multiple languages (3 for me).
Exploding targets and some rocket fuel mixtures need al too.
Kalle Klæp congratulations.
you are on a level above....great work
FBI will come knocking soon wanting to know why you've got kilos of aluminium powder lol.
AFAIU they're out of FBI jurisdiction
Ian Zagorskikh
Sorry, CIA. Simple mistake.
That Was Awesome The Weld Shots Were cool to Great Video Gents.
When you're not breathing in enough metal particulate from vaping...
I thought of two applications for this to justify wanting to make one myself: cleaning off brass cases for reloading ammunition (shooting on a range with friends = lots of ammo to clean and reload, though I would need a much finer medium for brass casings) and for grinding down steel steel chips from the lathe/mill to make casting ingots easier. Fine powder means less heat needed, which makes ingot-making that much faster.
I recall using walnut shell with a bit of red rouge in the one I made. I started with a small black rubber/plastic tub, but then went to a six-sided plywood container that held several times as much. Was processing more cases for the Dillon press, then.
As if to have to bolt and unbolt the lid every time.
Editing is going places in this episode, guys!
Is that powder going to be used in an upcoming video?
I sure hope so
I suspect they are making termite...could be a cool video about welding something with this stuff.
What an oddly specific machine to make. I can only wonder what kind of crazy stuff you have planned for this.
Я не понял .А зачем это .
Делать пыль)))
Amazing, Now i clearly understand how a ball mill functions
what do you need metal powder for? please give examples!
Andrej Terentiev flashpouder or thermite
Evem homemade metallic paint!
you could use it for alloying or casting.
the finer the material the less abrasive it is when used in a sand blaster.
Andrej Terentiev: casting parts. Mix high ratio of metal powder to epoxy and cast or repair. Highly wear resistant (low temp tho less than 100c).
what a great man with great ideas
Had to mute the annoying soundtrack.
Very Nice. I could use one of these my self. Great job
Have fun with Alzheimer's.
Fantastic! Id love to see a Ball mill made from an old 500Gal Propane tank!