Grandstream IP PBX UCM6100 setup in 30 minutes - Firmware 1.0.9.25

Поделиться
HTML-код
  • Опубликовано: 17 ноя 2024

Комментарии • 31

  • @peterjames3724
    @peterjames3724 8 лет назад +3

    general info and 6102 discussion until 4:10 then 6104; extensions 7:42; sip trunk adding 14:20; check sip status 16:15; inbound/outbound routes 16:30; ivr / auto-attendant 20:40; ring group 24:50; fax sending 27:50

  • @fabianlazarte7465
    @fabianlazarte7465 9 лет назад +1

    Excellent tutorial, thanks! I will definitely consider your company when looking for SIP trunking.

  • @alaabadri2008
    @alaabadri2008 7 лет назад

    Thanks for this Excellent tutorial , but i wonder if we can use ucm appliance as a gateway for Elastix server if not can we add some of Elastix server module like call center module to Grandstream ucm appliance

  • @sultanbino
    @sultanbino 9 лет назад +1

    thank you for clear demo 10/10

  • @gogolinda7299
    @gogolinda7299 3 года назад

    Excellent

  • @attrib01
    @attrib01 7 лет назад

    hey I have and question, I do have and UCM6104 and I connect 3 FXO lines and I have this problem with the inbound calls that I can only receive 2 at the same time and the Voip lines and the 3 analong line the system don't pickup those calls. Any help thanks you!

  • @nithingeorge517
    @nithingeorge517 6 лет назад

    Hello,
    I am trying to import XML file on my Grandstream phone (GXP 1780) via the import setting under the Phonebook. The file gets imported and it says a message, "File imported successfully". However the phone doesn't read it, and i dont see any contacts under the Phonebook->Local Phonebook. Can you help me with this issue?

  • @JeroenBuggenhoudt
    @JeroenBuggenhoudt 9 лет назад +1

    How to add a phone which is not a grandstream device?

  • @rmontana3693
    @rmontana3693 7 лет назад

    I tried Elastix and it was such a headache to set up, especially with various phones and I had lots of issues with dropped calls and mysterious intermittent problems. When I replaced the system with Avaya IP Office the customer loved it and the complaints stopped. Do I want to keep using Avaya? No, I would like to use something open source and something cheaper, but until there are alternatives that are as easy to setup and problem free as Avaya I am not going back to anything Asterisk.

  • @mohammedmadani1255
    @mohammedmadani1255 8 лет назад

    thanks bashar , but i have question about how can i restrict extinsion to commuincate some other extension ?

  • @milindtech
    @milindtech Год назад

    How to add GSM GATWAY

  • @gopu6410
    @gopu6410 7 лет назад

    clear demo very good

  • @moatazshawky5456
    @moatazshawky5456 9 лет назад

    Dear kindly I need to know how to enhance the voice Quality, I configured UCM6104 with 3 GXP2110, GXP2120 everything is okay Inbound, Outbound calls but I've Noise Sound.

  • @Shayma_a
    @Shayma_a 5 лет назад

    When I write the ip address of UCM in browser, it doesn't connect to the page of UCM!!
    What can I do?

  • @alexanderslobodianiuk
    @alexanderslobodianiuk 8 лет назад

    when I try to call I hear:"all circuits are busy now please try your call again later"....but when I call from outside everything is fine...(((

  • @iYousif_
    @iYousif_ 8 лет назад

    Does the UCM6100 series has a wallboard like Avaya systems? Thanks!

  • @thusijeya9561
    @thusijeya9561 8 лет назад

    I have 6104 ucm,outgoing call is fine but I cant get incoming call from primary number ,iam using analog 3overline phone ,phone model is 2170gxp model.anyone know issue?

  • @edwardbaylon8402
    @edwardbaylon8402 9 лет назад

    Hi Sir,
    our company is planning to buy the UCM6100 series,
    but we would like to ask if auto-provisiong or the zero configuration also work with other ip phones like polycom or cisco.
    if not is it possible to add it manually?
    Both phones are SIP phones.
    Thanks.

    • @Khalis-sss
      @Khalis-sss 9 лет назад

      +Edward Baylon
      Not possible, you can only add configure file to UCM storage and upload from there (so in some way you can provision).

  • @redesiglo
    @redesiglo 9 лет назад +2

    no es compatible con las trunk sip de claro

  • @keajewelry
    @keajewelry 8 лет назад

    i have a question can we set up paging extension to Extension with these device and how ?

  • @supersmart671
    @supersmart671 7 лет назад

    Can I update an existing live system without losing existing configuration?

  • @razerbots
    @razerbots 8 лет назад

    Hi LucidPhone,
    I'm hoping you or anyone out here can help me out. My UCM6104 unit was previously managed by a colleague who has since left the company. She changed the username and password, and I'm unable to login now to change some settings. Do you know of anyway that I can gain access into the unit? or if I do a factory reset will the login id and password revert back to the default which is admin/admin?
    Regards.

  • @raptown2000
    @raptown2000 6 лет назад

    Great tutorial!

  • @macnasty7605
    @macnasty7605 7 лет назад

    i have a 6102 but sees only 2 of the 5 devices.. very hard to configure.. not working :(

    • @LucidPhoneMississauga
      @LucidPhoneMississauga  7 лет назад

      I suggest that you use LucidPhone UCL202 IP PBX instead.
      It is stable and has no issues.

    • @KorgKapperi
      @KorgKapperi 7 лет назад

      I have the same (grandstream ucm 6102) and find it difficult, almost impossible to configure.. Your video shows hot to configure this device, why do you suggest to get rid of it ?

    • @hishamk
      @hishamk 7 лет назад

      Because it seems they've sold these devices to their customers in the past and had a ton of problems setting them up as well as reliability problems, which eventually led them to design their own solution using Asterisk (LucidPhone PBX). They're basically just trying to help people with these substandard products (Grandstream) to get them to at least work for a bit.

  • @ahmad-rateb
    @ahmad-rateb 7 лет назад

    thanks good one

  • @حسين-ر5س7س
    @حسين-ر5س7س 7 лет назад

    مرحبا بك ممكن سئال