I look forward to seeing the new video on the Challenger - in my opinion it deserves as much attention and filming as you have done on the Leopard - in comparison this Great British icon has been neglected!
Hi! I’m going to do an In-depth look at the chally. It was one of the first vids I did, so it’s only pictures, so I’m going to try and stick something together that’s hopefully useful?. Thanks so much for watching, and I’ll try my best to show what I’ve done. And sorry for tardy reply, life’s been a bit nuts! Have a great week!
Hi! Thanks so much, it was fun to detail it up a bit 🙂 and if you want to repaint it it’s Tamiya nato black and field grey. Thanks for watching 🙂 and have a great weekend!
Thanks! And sorry again it’s not the most interesting vid on RUclips. If you get stuck on anything let me know and if I’ve got spare bits I’ll try and do a vid to demonstrate, if helpful.
Hi! I didn’t want to be so presumptuous 🙂 but thanks it was a bit of a trip! 😂 Thanks for watching, it means a lot that someone else hopefully finds it useful. Have a great rest of the week and happy new year!
Hi! I haven’t got a vid of that, I built this before I really did anything with my channel, so didn’t record the build in detail. basically it’s screwed to the challenger mantlet lower part you can see it at 1.04 into the vid to 1.19. You have to use a spacer to level it up, and screw into that. As for the APS I wanted to build it as a new pre Iraq chally 2, a few years out the factory, so APS wasn’t around, and ascetically I like the cleaner lines without it. Thanks for watching, and have a great weekend!
@@joshualasut3849 hi! To be honest heng long have now done what I did in this bb unit, you’d just have to convert it in the same way as the Abrams Airsoft bb unit. They all have recoil system now 😊 www.ebay.co.uk/itm/234690330640?chn=ps&norover=1&mkevt=1&mkrid=710-134428-41853-0&mkcid=2&mkscid=101&itemid=234690330640&targetid=1281796773351&device=m&mktype=pla&googleloc=1007246&poi=&campaignid=9445986157&mkgroupid=122313250003&rlsatarget=pla-1281796773351&abcId=578896&merchantid=138802332&gbraid=0AAAAAD_Lr1cR4ImVIi_oEHcCjeZcAsXYu&gclid=EAIaIQobChMIw-y4spjo_QIVQ7TtCh2e7A2UEAQYEyABEgKstvD_BwE Just need to make the boot, a lot easier to do.
Hi! To be honest I don’t like the look of them, and all the kits are 3d print, so a bit fragile. Maybe at some point I might do one on a new challenger build. Thanks for watching!
Hi! of course, this is going to sound nuts, but its field gray! XF-65 thinned with tamiya lacquer thinner with retarder 40% paint 60% thinners. Here it all is below www.snmstuff.co.uk/product/tamiya-acrylics-10ml-xf-65-field-grey/ www.air-craft.net/acatalog/Tamiya-Lacquer-Thinner-Retarder-87194.html?gclid=Cj0KCQiAy9msBhD0ARIsANbk0A_ojNdl8htYSSszeUG3USiUPvBJjueMoQVkmQpyZWS-h6sVA8wcokoaApopEALw_wcB high lights i just add a bit of white. always feel free to get in touch with any questions! Happy new year, and thanks for saying hi and watching my stuff! 👍🙂
hi Its a tedious job, but some slow set superglue, i used ammo in black. those tracks are great as long as you go straight! Thanks for watching, means a lot! have a great day
Cheers I’ll try that,are you the guy that 3D prints the armour for the challenger 2 I have the chobham one in at the moment but I would like to upgrade to the megatron armour
@@challyho2u244 hi! No 🙂 I’m not that clever! It’s armoured models facebook.com/profile.php?id=100057730896823 Nice guy! He also has an eBay page www.ebay.co.uk/usr/larrylonglegs99 Funny I’ve been looking into 3d scanners because I want to copy the still brew from the meng chieftain kit! 😂
Hi! Alas it’s wasted on me, I have no 3D printer. I’d love to work out how to use one, must be cool seeing it print out! Thanks for watching, and the round looks great. Have a great rest of the week!
I look forward to seeing the new video on the Challenger - in my opinion it deserves as much attention and filming as you have done on the Leopard - in comparison this Great British icon has been neglected!
Hi!
I’m going to do an In-depth look at the chally.
It was one of the first vids I did, so it’s only pictures, so I’m going to try and stick something together that’s hopefully useful?.
Thanks so much for watching, and I’ll try my best to show what I’ve done.
And sorry for tardy reply, life’s been a bit nuts!
Have a great week!
Adding commentary to your existing vids may be a good interim measure? Bob (zooma) @@mrtankalotrctankschannel
I bought the challenger 2 same Verison hate the colour of mine want it woodland to lol. Awesome kit mate great job
Hi!
Thanks so much, it was fun to detail it up a bit 🙂 and if you want to repaint it it’s Tamiya nato black and field grey.
Thanks for watching 🙂 and have a great weekend!
Nice hopefully it still fires bbs though that's what makes an rc tank a RC tank.
Hi!
oh yes, probably the only one with a working gator, and bb unit, with recoil😁
thanks for watching, and have a great week!
Amazing work. Details and colouring are outstanding 👏
Hi!
And thanks so much, and thanks for watching, this vid does go on a bit! 😂
I really enjoyed the building it.
Have a great week!
Great job! A lot of work. I'll start with mine after vacation. All parts and pieces are ready.
After watching your vid I want to start now🤔
Thanks! And sorry again it’s not the most interesting vid on RUclips.
If you get stuck on anything let me know and if I’ve got spare bits I’ll try and do a vid to demonstrate, if helpful.
Nice
🔵🔵🔵👍👍👍😀😀😀🔵🔵🔵
Thanks! 🙂 and thanks for watching 👍👍
This should be titled super detailing a heng long challenger 2 cause you did a lot more work than just swapping a Haya fire control unit. 😁
Hi!
I didn’t want to be so presumptuous 🙂 but thanks it was a bit of a trip! 😂
Thanks for watching, it means a lot that someone else hopefully finds it useful.
Have a great rest of the week and happy new year!
That is a super detailed work you got there. What regimental markings does it have? Life Guards or Blues and Royals?
It’s the royal hussars prince of wales reg photo I found, liked the Diamond, and it’s a very just in service tank
@@mrtankalotrctankschannel aren’t they the first ones receiving the new Chally 3 with the L55A1 smoothbore maingun starting 2024?
@@canto10mosha65 to be honest I don’t know! I think the only regiment in tanks now is the royal tank regiment? Might be wrong 🙂
Chalenger-2
Master full paint job.
Thanks so much! Too kind, and happy new year 🥳
@@mrtankalotrctankschannel You too!
Wow! Very nice.
Thanks! Too kind 🙂
@@mrtankalotrctankschannel looks great! 👍🏻👍🏻
@@hayaltd thanks! and i read your new control system has the Challenger on the sound set, wold love one for this!
Very good!&
Thanks! Sorry it’s a bit long winded! 🙂 and thanks for taking the time to watch
Have a great day
first is there a how to video on how you installed the haya bb recoil unit and also why don't you add the APS active protection system on the tank?
Hi!
I haven’t got a vid of that, I built this before I really did anything with my channel, so didn’t record the build in detail.
basically it’s screwed to the challenger mantlet lower part you can see it at 1.04 into the vid to 1.19. You have to use a spacer to level it up, and screw into that.
As for the APS I wanted to build it as a new pre Iraq chally 2, a few years out the factory, so APS wasn’t around, and ascetically I like the cleaner lines without it.
Thanks for watching, and have a great weekend!
@@mrtankalotrctankschannel will u make a how to video on it soon tho also at 3:21 what's that weird blue thing sitting in the gun
@@joshualasut3849 hi!
To be honest heng long have now done what I did in this bb unit, you’d just have to convert it in the same way as the Abrams Airsoft bb unit.
They all have recoil system now 😊
www.ebay.co.uk/itm/234690330640?chn=ps&norover=1&mkevt=1&mkrid=710-134428-41853-0&mkcid=2&mkscid=101&itemid=234690330640&targetid=1281796773351&device=m&mktype=pla&googleloc=1007246&poi=&campaignid=9445986157&mkgroupid=122313250003&rlsatarget=pla-1281796773351&abcId=578896&merchantid=138802332&gbraid=0AAAAAD_Lr1cR4ImVIi_oEHcCjeZcAsXYu&gclid=EAIaIQobChMIw-y4spjo_QIVQ7TtCh2e7A2UEAQYEyABEgKstvD_BwE
Just need to make the boot, a lot easier to do.
@@joshualasut3849 the blue thing is the dust cover that stops dirt getting in the mantlet. An Amazon gift bag is exactly the right fabric.
@@mrtankalotrctankschannel oh k
why don't you make ur challenger into the challenger TES search it up if u don't know it
Hi!
To be honest I don’t like the look of them, and all the kits are 3d print, so a bit fragile.
Maybe at some point I might do one on a new challenger build.
Thanks for watching!
Mr Tank A lot may I ask what colour of green you used for the Challenger? It looks fantastic and I hope to do up a challenger in flat green.
Hi!
of course, this is going to sound nuts, but its field gray! XF-65 thinned with tamiya lacquer thinner with retarder 40% paint 60% thinners.
Here it all is below
www.snmstuff.co.uk/product/tamiya-acrylics-10ml-xf-65-field-grey/
www.air-craft.net/acatalog/Tamiya-Lacquer-Thinner-Retarder-87194.html?gclid=Cj0KCQiAy9msBhD0ARIsANbk0A_ojNdl8htYSSszeUG3USiUPvBJjueMoQVkmQpyZWS-h6sVA8wcokoaApopEALw_wcB
high lights i just add a bit of white.
always feel free to get in touch with any questions! Happy new year, and thanks for saying hi and watching my stuff! 👍🙂
Skill just isn't a good enough word 🎉
Great job!!
Thanks a lot! Very kind 🙂
What did you stick the rubber pads with onto the metal tracks mine keep coming off unfortunately 😂
hi
Its a tedious job, but some slow set superglue, i used ammo in black.
those tracks are great as long as you go straight!
Thanks for watching, means a lot!
have a great day
Cheers I’ll try that,are you the guy that 3D prints the armour for the challenger 2 I have the chobham one in at the moment but I would like to upgrade to the megatron armour
@@challyho2u244 hi! No 🙂 I’m not that clever! It’s armoured models
facebook.com/profile.php?id=100057730896823
Nice guy! He also has an eBay page
www.ebay.co.uk/usr/larrylonglegs99
Funny I’ve been looking into 3d scanners because I want to copy the still brew from the meng chieftain kit! 😂
@@mrtankalotrctankschannel ok thanks
... nice work, respect!
Thanks A lot, not the most interesting clip, but i thought i could show whats involved if anybody else wanted to give it ago.
beautiful piece of art 💯
too kind, sorry its a bit dull to watch, was more for reference than entertainment :-)
Would you like an stl file of a L23A1 apfsds fin round that's full size but can be scaled down to 1/16th
Hi!
Alas it’s wasted on me, I have no 3D printer.
I’d love to work out how to use one, must be cool seeing it print out!
Thanks for watching, and the round looks great.
Have a great rest of the week!
Amazing
Thanks a lot 🙂
Класс!
Thanks!