I really love that you are an all brands, no brand wagon type! I too have a bunch of trucks from cheap and name brand! its all about playing with rc vehicles!
What a terrific indoor course you´ve built - I hope you get to keep it - it´s a great way to get some RC action on a very hot or very rainy day. I think this was also a very fair test of the capabilities of the RemoHobby. It did so well, but in the "steep ascent" test it looked as though the centre of gravity was either higher or further back than it is on the Super Honcho and the Honcho´s tyres seem to have softer inserts? Or is the rubber in a softer compound? You´ve certainly demonstrated that the RemoHobby is a crawler to be respected; it can hold its head up with pride among the big guys : )
That Super Honcho is a machine for crawling, everything in there is an high end product, and the tires are super grippy with some kind of competition foam inside and the rims have 140gams, that only makes the centre of gravity way lower than normal. Then the suspension almost doesn't let it jump when trying to grip, the front axle spins more than the back one so that it can be "puled" and not "pushed".....tha's why the name Super. The Remo is Super stock, hehehe. Big thanks again on you comment and you check all the details of the test video.Very pleased with you comments and your knowledge.
Wow - the Honcho runs a "taller" ratio at the front...that´s so clever. I´d love to see the Remo compete against an ordinary RTR Honcho. I run a I:I8 Ninco Stone Crawler - my friend has a Losi MRC with a "droop" suspension setup and soft foam inserts helping the lead weights in the tyres, and his crawler works way better than mine...
This space is from a crawling team an this is their maintenance and test shop. You leave in the place where almost every of this things are made....Thanks a lot for comment.
Oh man what a cool setup, I was too busy looking at the course,too really pay attention to the trucks, Outstanding job,very creative,and inspiring, I'm going to watch it again,so that I can pay more attention to the trucks :)
This place is really nice, an amazing shop for maintenance and test. This is from a team of crawlers and they sure have make a grate work here. Thanks a lot for your support.
Buen trabajo como siempre pero prefiero al remo es ma barato y lo puedes customisar co partes de honcho y axial la sus de fabrica no le ayuda ni las ruedas pero por el precio es perfecto Buen video como siempre tremendo trail
Muito bom comparativo entre os modelos, nítidamente se percebe que a adição de algum tipo de pequeno peso próximo ao centro de gravidade e/ou no centro dos eixos, talvez ajudasse a ter um melhor contato nas situações íngremes de tração. Parabéns pela criatividade na geração do vídeo.
I think the Remo's suspension (the coil) is too stiff, and it make it bounce a lot ( very weird... being a "chinese"), if the coils were as the 10428 stock it would be much better in this "scenario"... Still... I L O V E T H A T T R A C K. Great Job Man.
Adams RC big thanks man and yes, just arrived from that shop of the drift car video with some of the 5g lead weights for that. Heheheh. Yours coyote sure should look so cool in the track too. Hehehe
Both because y'all had fun and I fun watching lol but yeah thx for the side by side. Thought I might try a Remo out for the price I've got other better crawlers now. the steering linkage is really goofy looking how's the turning? I can tell softer tires would be great but for the price it's pretty cool. Thx again✌️
Thanks a lot for the support man, but this one is from a friend of mine witch have a "team" with him for crawling events and that is the maintenance and test shop.
From the looks of it they will interchange with some exceptions. I'm looking yo rebuild my original scx10 and I'm thinking of buying this truck and putting my axial set up on it. Shocks, 1.9s, drag brake, dual slipper, and locker pack
Tough call,they both did well, but the Honcho definitely had the wright stuff for the last hill, They are both great looking rigs,but that Honcho definitely caught my eye :) Great video once again
Você e BR mano , onde comprou foi taxado ? Da pra fazer upgrade no servo pra ele virar mais notei que vira pouco ? Ele é bom ? Da pra deixar igual o honcho ? Quais ups sao necessários para deixa-lo igual ? O tamanho é exatamente igual ao honcho ?
Nice video and test ! is the front axel and steering system on the Axial Honcho original or can you tell me a litle about it ? it seems to work better than the Remo Hobby ! thanks :-)
Ivan TTT thanks a lot. Your totally right. Just and 70grams in each wheel on the front, lower the body and add a little camber on the wheels and is very good. That adjusts are all with factory adjustments possibilities. Super well design this car. Thanks for comment and for your tips.
Mother of God!! someone has been busy lately, aahaha, is not this going away from my hands a little? this is a great friend site! I'll go for a few laps. Great job, congratulations! jeje in minute 4:40 may be a winch will help? a greeting
SongoLand this is a work of father son and friends on a crawler team maintenance and test shop. Sure an amazing place to test the cars. One thing I will try for that 4.40 issue is a weight inside the rims go get the center of gravity lower. But man you also like the wltoys 10428 and it beavers like a beast. A 100€ toy against almost 2000€ car. Heheheh
I really love that you are an all brands, no brand wagon type! I too have a bunch of trucks from cheap and name brand! its all about playing with rc vehicles!
Super mod Honcho agaisnt almost stock Remo. Even so, the Remo did the job. Very nice course and garage!.
My eyes is on Remo...for the money I think it's reasonable. You can upgrade same as the honcho on stock. Is the honcho parts fitted on remo?
Super cool indoor course....To me the biggest difference is just the price...
Awesome video thanks for the visit and yes the Remo hobby it as is space on RC Scale market and it will be easy to upgrade it and make it a top Truck.
Thanks a a lot and sure that place is great for this tests and comparison, also very pleased with the car behavior and for what it have inside.
What a terrific indoor course you´ve built - I hope you get to keep it - it´s a great way to get some RC action on a very hot or very rainy day.
I think this was also a very fair test of the capabilities of the RemoHobby. It did so well, but in the "steep ascent" test it looked as though the centre of gravity was either higher or further back than it is on the Super Honcho and the Honcho´s tyres seem to have softer inserts? Or is the rubber in a softer compound?
You´ve certainly demonstrated that the RemoHobby is a crawler to be respected; it can hold its head up with pride among the big guys : )
That Super Honcho is a machine for crawling, everything in there is an high end product, and the tires are super grippy with some kind of competition foam inside and the rims have 140gams, that only makes the centre of gravity way lower than normal. Then the suspension almost doesn't let it jump when trying to grip, the front axle spins more than the back one so that it can be "puled" and not "pushed".....tha's why the name Super. The Remo is Super stock, hehehe. Big thanks again on you comment and you check all the details of the test video.Very pleased with you comments and your knowledge.
Wow - the Honcho runs a "taller" ratio at the front...that´s so clever. I´d love to see the Remo compete against an ordinary RTR Honcho.
I run a I:I8 Ninco Stone Crawler - my friend has a Losi MRC with a "droop" suspension setup and soft foam inserts helping the lead weights in the tyres, and his crawler works way better than mine...
Bro, amazing little course you have set up there and super nice work area! Great comparison of the two rigs.
Fun little indoor course there.
Thanks a lot and sure is.
now i am inspired on to your ...rc crawler indoor track 😃
So, this is the gen 1 remohobby. The Gen 2 looks almost exactly like the gen 2 SCX10. I wonder with all the improvements if it works differently?
It's a really cool workspace ~
I envy you ~
There are even trial tracks ~
Thumb chuck!
This space is from a crawling team an this is their maintenance and test shop. You leave in the place where almost every of this things are made....Thanks a lot for comment.
I just bought this exact same model an hour ago because I watched too much of your Remo Hobby crawler video. Keep up the good work ♥️
Any crawler can do this high grip course, loose gravel and dirt type terrain would be a better comparison I think.
Oh man what a cool setup,
I was too busy looking at the course,too really pay attention to the trucks,
Outstanding job,very creative,and inspiring,
I'm going to watch it again,so that I can pay more attention to the trucks :)
Awesome work on this great course and nice garage !! Very good video !!
This place is really nice, an amazing shop for maintenance and test. This is from a team of crawlers and they sure have make a grate work here. Thanks a lot for your support.
Buen trabajo como siempre pero prefiero al remo es ma barato y lo puedes customisar co partes de honcho y axial la sus de fabrica no le ayuda ni las ruedas pero por el precio es perfecto
Buen video como siempre tremendo trail
Muito bom comparativo entre os modelos, nítidamente se percebe que a adição de algum tipo de pequeno peso próximo ao centro de gravidade e/ou no centro dos eixos, talvez ajudasse a ter um melhor contato nas situações íngremes de tração. Parabéns pela criatividade na geração do vídeo.
I think the Remo's suspension (the coil) is too stiff, and it make it bounce a lot ( very weird... being a "chinese"), if the coils were as the 10428 stock it would be much better in this "scenario"... Still... I L O V E T H A T T R A C K.
Great Job Man.
What a brilliant truck that remo is! A bit of weight in the front wheels and it would be well away👍 love your crawler course too. Great video.
Adams RC big thanks man and yes, just arrived from that shop of the drift car video with some of the 5g lead weights for that. Heheheh. Yours coyote sure should look so cool in the track too. Hehehe
Would love to get my coyote on your course!
Just a shame about the distance ☹️
Great work though man, just watched it again!
Both because y'all had fun and I fun watching lol but yeah thx for the side by side. Thought I might try a Remo out for the price I've got other better crawlers now. the steering linkage is really goofy looking how's the turning? I can tell softer tires would be great but for the price it's pretty cool. Thx again✌️
Wow! I don’t have enough space to build indoor crawling track. I like this video. Awesome man 👍👊👌🏆😎
Thanks a lot for the support man, but this one is from a friend of mine witch have a "team" with him for crawling events and that is the maintenance and test shop.
Do you know if any of the axial upgrade parts fit the Remo hobby 1093-st like the alloy diff assemblys ect?
Same question
From the looks of it they will interchange with some exceptions. I'm looking yo rebuild my original scx10 and I'm thinking of buying this truck and putting my axial set up on it. Shocks, 1.9s, drag brake, dual slipper, and locker pack
Great video, with great content. Thanks for the time
Guys lets hit 1k subscribers before New Year!
HEHEHE that would be awesome man, big thanks and if you like it please share with your friends. BIG thanks
Tough call,they both did well,
but the Honcho definitely had the wright stuff for the last hill,
They are both great looking rigs,but that Honcho definitely caught my eye :)
Great video once again
SCX10 is not stock like the Remo Hobby vehicle is.
Você e BR mano , onde comprou foi taxado ? Da pra fazer upgrade no servo pra ele virar mais notei que vira pouco ? Ele é bom ? Da pra deixar igual o honcho ? Quais ups sao necessários para deixa-lo igual ? O tamanho é exatamente igual ao honcho ?
Nice video and test ! is the front axel and steering system on the Axial Honcho original or can you tell me a litle about it ? it seems to work better than the Remo Hobby ! thanks :-)
Awesome course and the Super Honcho looks amazing. #Goals
good work! REMO needs to be heavier!
Ivan TTT thanks a lot. Your totally right. Just and 70grams in each wheel on the front, lower the body and add a little camber on the wheels and is very good. That adjusts are all with factory adjustments possibilities. Super well design this car. Thanks for comment and for your tips.
good luck
i think for the money Remo Hobby 1093 is good ?
Nice remo
Mother of God!! someone has been busy lately, aahaha, is not this going away from my hands a little? this is a great friend site! I'll go for a few laps. Great job, congratulations! jeje in minute 4:40 may be a winch will help? a greeting
SongoLand this is a work of father son and friends on a crawler team maintenance and test shop. Sure an amazing place to test the cars. One thing I will try for that 4.40 issue is a weight inside the rims go get the center of gravity lower. But man you also like the wltoys 10428 and it beavers like a beast. A 100€ toy against almost 2000€ car. Heheheh
haaok! i was thinking that was in your house! ahahaa,, yes man for the money the 10428 is a fun one. love it. a greeting
What are the differences between scx10 and remo 1093
The Winner? For the price "Remo" ha ha.
add weights to the REMO.
Is this worth buying this
cool room !!
Is the honcho parts fit in the remo
rc ph yes the links and the drive shafts
cool place nice work XD
have nice day
Thanks a lot, was really a cool place and fun day.
super awsome 😍😍😍
Big big thanks and have a great year
😘😘😘😘😘😘💖
?
Yes, scx10 parts will work on the remo
Hard to support a company that so blatantly rips offs all of its designs. Coarse looks great. But can't condone the remo.