SolidWorks Sheet metal exercise
HTML-код
- Опубликовано: 17 дек 2018
- we will learn sheet metal basic features like Base flange, Edge Flange, Sheet metal gusset, Extruded Cut, fillet, mirror, Linear pattern, sheet metal forming tool, sheet metal emboss and Appearance in Solidworks sheet metal.
1)Solidworks tutorial for Beginners.
• SolidWorks Tutorial Fo...
2)Solidworks tutorial : Assembly
• Solidworks tutorial: A...
3)Solidworks tutorial vertical Stirling Engine
• SolidWorks Tutorial Ve...
4)Solidworks tutorial Forklift
• forklift Project in So...
5)Solidworks tutorial for beginners in Hindi
• SolidWorks Tutorial in...
6)Solidworks tutorial : Assembly in Hindi
• Solidworks tutorial in...
7)Solidworks Projects
• SolidWorks tutorial
like Facebook page.
/ cadcamtutorial
Subscribe our RUclips Channel.
/ cadcamtutorial
Excellent tutorials. It is straight to the point, easy to follow and understand.
legit didnt know those libraries were there. helped 1000% more than what i was expecting id have to do. now if only you could adjust the sizing of those as if they were features within the placement or at all
thank you for taking the time to put this together
Очень крутые уроки! Спасибо! Всех благ, Вам!
Perfecto. I love this video. Thank you so much.
Thanks! wonderful SOLIDWORKS instructing videos! 😎
Seems like you could reduce the number of features by sketching the mounting locations all at once vs creating mirror/pattern features.
parabéns por este excelente material
Thank you so much for the videos, very interesting, but i want to know if you have some tutorials for the manual and electric pallet truck
Thanks a lot Man for your time, just I could mirror the gusset by mirror command
good job mate,very helpfull
Thanks for video ! Design is very difficult.
Sir very good details lot of thanks, how draw in pipe structure and fittings please upload...
Teşekkürler formin tool açılımını kimse yayınlanmamış. Sayende ögrendim. (Thank you. forming tool flaten nobody found out thanks to you unpublished.)
thank you so much for all education
Thank you!
Great 👍🏻
At the end,, "Thnx for teaching"😃
Very nice design with hints u r uploading ,, Thank u so much I learned a lot from u nd hv Cleard many doubt, sir can u upload a video "How to transfer hole one to another parts at exact dimension in sheet metal ,, plzz upload a videos bcz it is so confusion during Assembley
thanks my friend 👏👏👏
Thanks very much
Thanks for this video
thank you so much was share videos useful
Thanks for your valuable informations, please explain how to create new forming tools
Beautiful
SIR, PLEASE MAKE A VIDEO ON WELDMENTS IN DETAIL & FORM A PRODUCT WITH THE HELP OF SHEET METAL & WELDMENTS
When you convert into dxf emboss is not coming?
Круто!
Thank you
Sir can you explain what is 3d experience solidwork .
goooood freund
Thanks
Thank you for the useful tutorial. Like.
6:17 - in my case Inner/Outer corner fillet are disabled. How I can edit them?
Same issue
please send more sheet metal parts videos
More Autodesk Inventor Please
I think your mirror command of the gusset didn't work because of the fillets. I find that solidworks is awkward about mirroring fillets/chamfers, so I've learned to save fillets/chamfers to apply in a single feature at the end of creating parts.
i unable to attach the circular emboss as you did, the options type and position has not appeared to me and i am unable to move circular emboss..
I need that exercise for another software
Hello
I want to design a simple part using twist or flex feature but also want to flatten it,
however, flew feature wouldn't allow me to flatten the part,
can you guide sir?
Thanks in advance.
Plz share video on k factor
I dont have desine library how i add embosess
great again
please tell me how change the size of emboss ?
hello sir, please post the drawing for the CAD as well so that we can practice
in new videos you will get the drawings,
what is the reason for doing 800 mirrors when you can model everything in one half and then mirror everything?
Some beginners can't imagine how doing something will look like when mirrored. It helps with continuity. Especially when we have seen the part finished in the start with all the features.
@@SergeiFragov engineering is not an imagination process, you think 10+ times and build the part in your brain well before you sit down and design anything. And having done one side and mirror it in one go it will save you tremendous amount of time. Unless you want some features present on one side only, I really see no reason why you do mirroring after every feature build.
@@SergeiFragov also since you're aiming at begineers you could also show them how to save time and work more efficiently
How to do oblong emboss
But after converting there is no annotation of bend lines by how much degree we need to bend ? How to resolve this ?
Sir plz do gearbox routing and piping.. waiting to watch sir
please subscribe my channel for solidworks alll in one piping is also included in that
Hi, everything is going well until I try to do the forming tool because after I do click the Circular Emboss icon appears a question "Are you trying to make a derived part?" Please let me know what do you think could be a possible mistake. Thank you...
Inside SolidWorks "Right Click" on the "foming tools" folder and select "Forming Tools Folder"
Sir hydraulic manifold block ke video banav
Which GPU do you use?
Your gusset had geometry failure when you tried to mirror it. Mine was fine but the (2) fillets failed? WTH?
Please upload drawing sheet sir
Boss!
Good
Best
It shows error when i try to flatten at the end...
Me too
top
This is Hilarious at 0.5 speed
Sir need to Hindi language videos in exercise pls helpme .
Mr can u translate this vedios in arabic language plaise
adamsın lan
Thanks