10 DIY Plumbing Mistakes NOT To Make! | GOT2LEARN
HTML-код
- Опубликовано: 29 апр 2024
- Here are 10 plumbing common DIYer mistakes and how to avoid them or fix them if they've already be made.
Join my plumbing forum for FREE!
got2learn.freeforums.net/
Amazon affiliate links to all the products I used in this video:
Sharkbite 1/2" Hammer Arrestors: amzn.to/2EIr16K
Lead-Free Solder 95/5: amzn.to/2yPvjso
OLFA Utility Knife: amzn.to/2NGcnQ6
Frost-Free Sillcock (All sizes): amzn.to/2T9HHgl
Propane gas(Blue bottle): amzn.to/2BOhnh7
Lead-free flux(water soluble): amzn.to/2XjaYn9
Flux brushes: amzn.to/2T8ROBc
MagTorch Butane Soldering Torch: amzn.to/2tNMlRV
PVC Ratchet Cutters: amzn.to/2WAPnsJ
IRWIN 10" Locking Pliers: amzn.to/2SuJSY3
To become a Got2Learn Subscriber: bit.ly/2IuENO5
DISCLAIMER: Got2Learn is NOT responsible for any damage done to a property of which the plumbing wasn't done by a professional, I do not recommend doing your own plumbing if you are unsure about what you are doing, always hire a LICENSED contractor when doing any type of plumbing so you can be covered by insurances if something does happen, these videos are for entertainment purposes only!
Stuff I used in this video:
Sharkbite 1/2" Hammer Arrestors: amzn.to/2EIr16K
Lead-Free Solder 95/5: amzn.to/2EsVVi1
OLFA Utility Knife: amzn.to/2NGcnQ6
Frost-Free Sillcock (All sizes): amzn.to/2T9HHgl
Propane gas(Blue bottle): amzn.to/2BOhnh7
Lead-free flux(water soluble): amzn.to/2XjaYn9
Flux brushes: amzn.to/2T8ROBc
MagTorch Butane Soldering Torch: amzn.to/2tNMlRV
PVC Ratchet Cutters: amzn.to/2WAPnsJ
IRWIN 10" Locking Pliers: amzn.to/2SuJSY3
You sound Armenian
Canadian, almost ;)
Great Video my man
Shark bite nothing!
No real plumber uses shark bite fittings!
"A toilet plunger will work in a sink, so there's no reason to get both models"
... I can think of at least one reason.
Emergency only lol
I can think of reason #2
Rule #1: Don't tell your wife.
@@Got2Learn Lol you screwed up buddy
One time I was working(plumbing company) as a guy’s helper and he asked me to get the “sink plunger”. He was really referring to the toilet plunger, but didn’t want the customer to know the plunger that unclogged their kitchen sink was just in somebody’s toilet, as the customer was standing right there when he asked.
Note to all of you that use a plunger: The upstroke (Pull) is where all the work is done. The goal is to break up the clog by pulling it back, not pushing it in tighter. Seat the plunger and push slowly until it is collapsed to the surface and the air is expelled, then pull back sharply, repeat as necessary. If you push to plunge the clog will get firmer and you will get splashed with the effluent. 01-16-2020.
I'm just learning that! I didn't splash stuff around the last time.
Technically you may be correct, but reality is that you are applying push-pull (positive-negative pressure) to break up the clog, and thus it will pass down the line and (hopefully) into a larger diameter pipe, or at least past the troublesome elbow, T, etc. where the stuff is stuck. Very rarely is the clog 100% solid ... so you are agitating and wearing it down with the water in the line.
And you should never use pressure on a sink with compression fittings. The pipes can blow off. I've gone to more than a few calls where people did this and it's not pretty.
Very Well Done. NO Stupid music. NO TIme Wasted. NO Silly LONG explanations which never help after the first 10 words. THANKS SO MUCH.
Thanks Bill!
Another reason for getting sewage odors is not having any water in the trap. If you have a floor drain (or any drain) that does not get used the water in the trap will dry out and render the trap ineffective. So, if you don't use a sink, drain or toilet on a regular basis be sure to pour water in to keep the trap full of water and sewer gas OUT!
👍👍👍
Or install a trap primer
Or pour a little vegetable oil into the drain. This will form a thin layer preventing the water from evaporating. It's easier than remembering to add water occasionally.
That’s a cool trick. I’ll remember that one.
I would add a few points:
1. Install check valves - aka "anti back flow valves" - on exterior hose bibs - especially those near the ground. Under some fairly common conditions, a vacuum can develop in the line above the bib and pull toxic water back up a garden hose and into the household water supply. Alternately, you can religiously coil the hose up and hang it so it's not in contact with the ground. Simply disconnecting the hose after each use works just as well. Check valves are more idiot proof in any case.
2. Never toss hair in a bathroom sink (any sink). Hair easily gets caught and accumulates on obstructions - such as excess glue on the inside of pvc or abs joints and even sloppy soldered joints - where it eventually forms a clog. When oils from makeup, soap, facial cream, etc. later get trapped in accumulated hair, the problem becomes even worse. I always use threaded fittings so that a joint can be easily taken apart if it becomes necessary to clear out a clog. A simple plastic hair screen over the drain will mitigate or prevent the problem. (Also note that most chemical drain cleaners produce considerable heat and can melt pvc or abs pipes and fittings. Threaded fittings will avoid having to replace melted fittings and sections of pipe.)
3. Always de-burr pipes before soldering or glueing them together. Burrs cause "whistling" as the supply water moves past them. Whereas "hammer" can be corrected by simply splicing in an anti-hammer device, whistling is a different issue and usually requires disassembly, de-burring and reassembly of pipes untill the offending joints are corrected. In some cases it may be necessary to completely replace entire sections of plumbing. Note that one whistling joint often betrays a sloppy plumber who may have created several such problems throughout a house. Always do a job correctly and to the best of your ability, weather making simple repairs or plumbing entire systems. Never cut corners to save a nickel since you'll almost always have to go back and make costly, time-consuming repairs. A happy wife and satisfied customers are what you want, every time.
* An electrician buddy once shared his "80-20 rule" with me. He said that 80 percent of his business was repeat business that came from 20 percent of his customers. Keep them satisfied with your best work and not only will they keep you coming back, but they'll recommend you to their friends and neighbors as well.
3:37 Never had a problem getting suction in my toilets with flat plunger (yay for water efficiency toilets) and it's more than a little gross to me to use the same plunger you would on a toilet as you would for the sink (especially the kitchen sink) so I would end up buying multiple anyways. Not to mention touching the plunger to fold it in and out all the time.
You can use disposable gloves
@@josem.2909 I'd rather not make more waste when it is avoidable but you're not wrong.
about cig butts in toilets... reminded me of university days. Maintenance staff put up a sign "please do not put cigarette butts in the toilet". A smartass added the note "makes them soggy and hard to re-light".
our college said, dont put semen down the drains. Different problems for different folks I guess.
And dont shit in the ashtrays....ok went to a weird school
Please don't put cigarette butts in the toilet, only regular butts!
I especially like the vise grip trick with the unsoldering. Neat to know.
Neat, right?
@@Got2Learn it just ruins the pipe
@@freezEware Agreed, unless you use the chain vise grip which has more contact surface. Therfore less damaging.
How do you expect to get a grip on it without them, adjustable pliers lol?
@@Got2Learn I am sorry but I don't understand you comment. The Irwin. chain grip was made in the USA. The chain grip is a bicycle chain that wraps around the tube and applies equal pressure on the tube. Not only the 2 opposing sides which can cut into the copper if fairy new with sharp teeth.
Thank you for the insight, I am an appartment maintenance tech and I just learned a bunch of things, and also had somethings confirmed that I was doing it right! Very cool! ☺
Awesome, I am happy to hear this, thanks for your comment Dan!
you are so direct, so succincted and clear about what you are talking about
Well, thank you :)
Please when unbloking a basin please explain that you need to block the overflow otherwise its useless. The air or water will come out of it 😉
Same thing with bathtubs; gotta cover the overflow when plunging the main drain in the tub. This is why I keep around a short handled version of a sink plunger, as well as regular plungers.
thanks for dropping knowledge. experience is the best teacher.
It sure is, I am so glad I could help, thx for your comment @Tiger Craps
All handyman and home DIYers should be required to watch these what not to do videos, they are often better than the how to do it videos.
Awesome, thanks so much Jeff!!
If they beginners, can,t they atleast read plumbing books, and wach videos, instead of imbarrest themself, not to mention about lick!
It's the same when learning a new language. You need to learn the swear words and lewd language first so you know what to avoid.
Or better yet, hire a professional to do your plumbing!
@ jeffostroff Just because YOU don't know much, don't get OTHERS involved!
I have been a journeyman plumber for years, this video has thought me so many things. Thank you!
Thank you Ryan so much!
Ryan Delaney That’s embarrassing
??
Yea he’s
Full of shit..
I’m a journeyman plumber and I
Learned
Nothing, that I already didn’t
Know
Thank you Got2Learn for such outstanding content, as a homeowner I've learned so many things I never knew about plumbing. Your videos are so easy and clear to learn from. I believe I can become a plumber just by your videos ! Great stuff Keep it up and much Love from Scarborough, Ontario
Thank you so muchhhhh!!!!
The oils in the marker are not good when soldering I recommend a different marking solution learned the hard way lol
OK,but don't call me LOL.
Yes, I use a pencil!
You should sand it off anyway and it won’t matter
Loved it, did not know about the backup one way valve. DID NOT KNOW ABOUT THE PLUNGERS!! but I'm on 50 yrs old...Thanks.
Awesome, glad I could help out Paul, have a great day sir ;)
good tip! i love banging pipes, i'll add something to the pipe so it doesn't ware through
Great Video, in my mothers basement she used to get flooded when their was a bad storm, I didn't know they made a backflow preventer for a sewer main. I have installed a backflow preventer on my boilers feed line. Its almost like a check valve.
There's a better answer. Use an sump and ejector pump for all fixtures on basement level. The pump will pump up to a higher level not allowing swage to flood the house.
Love your videos man, so helpful, I’m an apprentice plumber and learning these tips and tricks has really helped me out, thanks man
Awesome man!!
Loved the tip about the transition cement. I had no idea!! Thanks again for the helpful info G2L 👌
My pleasure!!
Against most plumbing codes to use it.
@@chrismitchell6441 qualify that statement.. the only approval is for sewers ABS to PVC connection see UPC , IAPMO listings
Great info!!! I had no clue about the different cements..I thought the purple primer and cement were the only two. 🤦🏾♀️🤷🏾♀️ Thanks for sharing 😊
😇😇😇
Using the vice grip to hammer the pipe back into place is brilliant.
;)
I’m an apprentice plumber and I’m watching this after a job I did at a vacant home one of the most embarrassing days I’ve had. There was a pinhole leak in their main drain line located in the garage so I cut the section out and I really had to go BAD so I left with it cut open. And my supervisor was with me already using the downstairs bathroom so without thinking I scurry to use the upstairs and after I accidentally flushed it i already knew where it was going. I walk down to the garage and my supervisor already heard it flushing down and he basically caught my #2 for me
OMG, poor guy heheheheheh
Pro.
At most jobs, people say they have to deal with shit from their boss. This is the first time I am hearing about the boss dealing with the employee's shit.
Please be aware that in the word solder the L is silent, also there is no such thing as a HOT water heater in any future video as I hear that many times on you tube videos other people produce. Thank you for your GREAT tips.
I am a do-it-yourselfer. Thought I knew everything. You confirmed what I knew and enlightened on some others.
🙏🙏🙏🤟🤟🤟
Excellent video, I am not a plumber but I have done a lot of plumbing in my various houses.
Most of the tips here are simply COMMON SENSE, but some are not.
I was gratified to see that I knew all of these tips and have never been guilty of ignoring them.
Just one thing however, yes the toilet plunger can be used in a sink by folding the horn into the plunger.
HOWEVER considering where the toilet plunger is used, I personally WOULD NEVER USE IT IN A SINK.
Here in the Midwest, we use Turd B Gone, works like a charm
One thing to mention is that backflow preventers aren’t needed in basements that are above the sewer line in the street, like in a house on a hill. ✌🏼
Good point, thanks Matthew!
Always learning g something new, great tips. That Hanks for reminding me to disconnect my garden hose. Winter has arrived in chicago
Glad I could help out ;)
Very informative - quick and to the point - I actually learned something.
Awesome, glad to hear that!
Always a amazing video ❤️
Everyone was surprised when I was using a wrench to transport floor boards ;)
;)
To add to the hose bib, add a little grade so that all or most of the water drains out. I just replaced a buddies that wasn't graded and Shazam it had a burst.
These videos are a great help for sure. Thanks for making them. I will be starting my Tiny House plumbing soon enough :)
Awesome, have fun with the project!
Thank you, I picked up several pointers!
My pleasure Michael!
Many years ago while working for Roto Rooter, I did a toilet job for a property owner who's tenant was either red crayons or red candle wax both ought to be added to that list.
Hmmm how dis I not tjink about that one, thx a lot Matthew Anderson!
I have also come across bath tub toys, brpken glass, and steak boned
Action figures, sunglasses, fancy bars of soap, Apple's!
@@danieldawson222 fancy soap, perhaps. Action figures, sunglasses and apples would break up or apart after the toilet augger and make it past the S bend
@@mattdandersn pulled all
Of these things out with a toilet auger.
I'm an apprentice2 years in, and I watch your videos all the time THANKS for the assistance and knowledge!! my boss thinks im crazy because I watch these all the time after work lol. I really LOVE plumbing!! oh yeah my tip is don't waste your $$$ on dewalt buy milwaukee
So glad I could help out :)
Excellent tip!
I got 2 learn since the Texas Winter storm like never before..my opinion for plungers is that I wouldn't use a toilet plunger for a sink unless it is brand new one . Thanks !
🤗🤗🤗
Your video is one of the best I have ever seen... it’s short informative and straight to the point... thank you..
You are most welcome! 😊
All 9 tips were pretty much right on. But only thing I have to disagree with is gluing ABS to PVC. I pretty much replace what’s there or if I do transition it with a different pipe, I use a “No Hub Band” coupling. Other that that, the Vice grip trick was pretty awesome.
Good info here, thx for your input Richie, really appreciate it ;)
the garden hose issue was shown to burst in the wrong place... it always bursts on the hose bib, next to where the water pipe connects to it... and you never know when it actually burst until you go to use it the next time... you may notice a pressure loss at the hose, but unless somebody is inside, you may not find out you are flooding your crawlspace/basement until it is to late...
Also, its not a backflow preventer... its a backwater check valve...
OMG great video and awesome advice! Especially the one where you can convert the toilet plunger also into a sink plunger! In this economy, every penny counts.Cost saving is everything, and no need to waste money to buy 2 plungers! hell yeah!!!
Thanks for sharing!!
I always find your presentations well crafted and brim full of explanation. Many thanks.
🙏🙏🙏
You make things look to easy 😂
But I really like this video
Gotta love ya Jump, thx man ;)
Thanks man!
I did'n know about that transition glue. Thanks
Glad I was able to help Daniel!
And how do you prove to an inspector that you used transition glue. Just because a manufacture makes a product, that doesn't mean it makes code. Transition glue is not code in MN.
Daniel Rios Me too I learned something today as usual
@@johnerickson1484 same here in CT. I have seen abs to pvc joints fail. The best thing to do is use a fernco.
@@johnerickson1484 this glue is green in color and is to be used for sewer connections only. it is UPC and IAPMO approved for this transition only , and not to be approved for any other transition.... IF INSIDE USE SHIELDED COUPLINGS AND/ OR MAYBE MALE TO FEMALE adapters??
This information is invaluable this is one of the best advice videos I’ve seen because it’s simple gets to the point shows you the problem and explains how to fix it very very good video five star🌟🌟🌟🌟🌟
Glad it was helpful, thanks Judy!
Paint or not on PVC you should always hit it with sandpaper to take the outer layer off to give it a better grabbing area, then primer before glueing.
Also should mention that two copper pipes rubbing together can cause "electrolysis" but very glad you suggested to cover up with tubing or insulation
Thank you Chris :)
though electrolysis was only two " dissimilar metals"?
Such a great video lots of great tips i did not know of 👌🏻👏🏻 Good job 😉
:) Now you do :)
Sherry u look beautiful
Juan Ballives thank you!
This is a great video. Useful, quick, no BS.
Thanks chris!!
lots of good information.I,m a diy and didn't know a few things that were shown .thank you
Awesome, misson accomplished for me :)))))) Please share if you can :)
never in my 15 years of plumbing have i experianced failures by cooling the copper fitting with a wet towel. i hear some plumbers say its bad but never has it been an issue
I happened to me. A joint I had soldered and quickly cooled failed some months later due to mild water hammer. I could see the solder had sorta crystallized in the joint. This failure caused a lot of damage and I learned my lesson. Now I cool the piping several inches away with a spray bottle of water, but never right on the joint.
@@paulmaxwell8851 ....if your solder had 'crystalized', whatever that means, in a manner that would have compromised the joint it would have leaked within a short time of pressurizing the joint. If you had water hammer that is most likely what caused the joint to leak. 30+ years as a plumber cooling down joints with a damp cloth and never a leak.
👍👍👍!!!
Just wait the 30 seconds...relax . Smell a flower, smoke a joint, have a beet... enjoy life bro lol
You right only the newbies say no!!!👍👍
At least here, PVC to Abs glue can be used once. Like house is abs going to pvc at tail out for sewer. Otherwise use nohub bands.
Thanks for all the great advice!!
My pleasure John, I am glad I can help in any way possible :)
Great stuff once again, G2L! LOL- you say sole-der, I say sod-der. Similar to others, I am (cough-cough) years old and just learned the difference between a sink plunger and a toilet plunger. Probably b/c like one of the commenters, my frugal dad used the sink style for the toilet and just put a little enthusiasm into the procedure- AND scrubbed and disinfected it afterwards. But he didn't use the plunger on a sink, he'd go right for the trap and clean it out. Also learned about the city sewer check-valve. Wondering if one was installed when our town went from individual septics to city sewers?! Thanks again!
Great video bro. I have seen my relatives make those simple mistakes and then they call me when they have issues. I’m not a plumber but know enough to be competent. But I did learn things from you👍. By the way, if I have an unpleasant door in a room, it’s usually because my dog farted 🙄
HAHAAAAA you made me laugh hard with the dog fart part, thanks for that Viper6 ;)
Got2Learn 👍😁
Poor dog always getting the blame! LOL !!!
Karabetter 😉
Viper6, an unpleasant door? How does that relate to a fart?
On the plunger thing, I found that that extra piece on the toilet plunger traps things that you want to go down the drain. I've used a sink plunger for years and has never failed. The seal is fine. Caution: the seal is so good that you can blow out the wax seal if you use too much force.
Hey Alex, I never considered this as a possibility and I've always used a quick down pressure to blow the blockage thinking more thrust was always better ... typical He-Man mentality LOL. I don't need to use the plunger often but I'm going to be more gentile going forward. Thanks so much for this tip!!!! A slow leak from a failed wax ring can cause a lot of damage in a short time.
That danger of blowing out the wax seal can be avoided by pushing down quite slowly on the plunger, then drawing it upwards quickly. You don't get quite as much pressure, which avoids the blowout. Also, you're sucking the clog towards you instead of pushing harder on a clog that started from to much pressure from your side. You pull the mess away from the clog, rather than pushing it harder into the clog. Never failed for me, once I learned this.
You’re the real MVP for these videos, man. Im very grateful for you. 🙏🏾
I appreciate that, thank you so much Jean Robert!
Good practical advice given in an easy to understand manner.
Thanks! :)
Thank you, great tips.
Thank YOU for watching and sharing :)
My dad has a rental property.
The tenants complained that there was a leaking pipe in the bathroom - so my Dad and a plumber went to the place.
In the bathroom, beside the toilet, there is a big pile of USED tampons.
My Dad and the plumber look at each other - and the plumber says "well, at least they aren't flushing them..."
Lolll good one ;)
I liked unsoldering part here. Heating the joint to liquid then the vice grips and tapping them with the hammer is a good idea. I’m a 35 year plumber by the way.
🤘🤘🤘
having a blast rewatching these ... so much info and great pro advice.
Glad you like them!
Ahhh ah! Québécois! Il me semblait aussi que l'accent me disait quelque chose.
Super vidéo!
;)))))))) Merci Maxime ;)))))))))))
J'avais vu que les colles étaient en englais et en français, donc qu'il est canadien... mais j'avais pas réalisé ce point.
#6 Plungers - Exactly right. I'd like to add that you should pull the plunger, not push it. Push the plunger slowly to collapse it, then pull hard to "suck" the stoppage loose.
Thanks very informative and well taught!
Awesome, thanks a lot !!
What a fantastic DIY for plumbing.
Most welcome, please share if you can, cheers!!
Good video! How many times do tenants throw things down the toilet?
Too many!!
Harry Knows Mine flooded my basement with a lot of shit. Huge damage!
Transition glue is only meant to be used underground.....Shielded coupling or male to female adapters are acceptable...
good call, never though about male to female....... clarify outside the building or they may use it inside the bldg underground which is not to code...
It depends on where you are. Plumbing codes differ from state to state.
I had to use it in our old house during a bathroom renovation and it passed inspection (they specifically checked for it)
One of the best DIY videos Iv'e seen. Great job.
Thank you so much man, I really appreciate it ;)
Thnx again for the lessons! I’ve learned a lot today!
;)
A typed "A" PEX tubing is the best and also, won't freeze tube too. All others are terrible and in troubles too.
Pex can freeze they are just harder to bust
Check well water pH. If it is 6.5 or lower use CPVC - not copper. If you use copper and haven't installed an acid neutralizer, over time the copper will developed pin hole leaks.
Good advice, thanks for your input John, appreciate it ;)
Lots of great info. Watching this is 7 minutes well spent!
Love hearing this!!!
Great video. Thank you for sharing.
Thanks, I am 73, you are never so old you can't learn something; and in only 7 minutes, Thanks.
👌👌👌
also another very good trick for soldering pipes, alot of time we still have water/dripping water in the pipe and this does allow the torch to heat well enough to solder. The trick is to push down the pipe some bread such that it clogs up and retains the water, you can then easily solder. Once over, just run the water and the bread will desolve and run through. Enjoy this trick.
Yeah, I made 2 videos about this:
#1) ruclips.net/video/lNUAX6mJTlA/видео.html
#2) ruclips.net/video/ygGkJcpKZzs/видео.html
@Mike I bet a slice of loaf bread is cheaper lol..........That's what everybody here has always used.
@Mike It's been about 30 years since I was doing this but that's what we always used.
I actually had to use the old bread trick in a nightclub that needed their water back on, as they had just opened their doors and quickly filling with customers. Club owners are breathing down my neck. I couldn’t get the final solder, it wouldn’t stop dripping. I sent their busboy for a loaf of Wonder Bread. Owners are almost panicking now. But it worked. They were relieved. Now they call me ‘McGiver’
Great videos. So much information to help us all. You're awesome!
Thank you so much :)
Informative as always. Thanks! I will share this with my family. 😊
🤘🤘🤘
Plunging a sink, the overflow hole should be cover to prevent the pressure going up through it.
Ya. Otherwise you're just pumping air in and out of the vent.
Most sinks don't have overflow holes, especially residential.
@@woodchuck1946 The overflow is not the vent. It's an overflow, in plumbing the vent is something else entirely.
@@shelbyseelbach9568 Kitchen sinks - no - bathroom sinks -yes. At least in my house in Canada they do.
Shelby Seelbach hey, I think you better look again. New type/high end sinks really desguized the over flow.
I’m a 35 year old... I had no idea that there was a difference in plungers 🤷🏼♂️
Today- I am a smarter 35 year old 😁
Awesome, glad I can help Chace, have a great day ;)
I can’t stand your videos! However your robotic voice and bad advice are always funny! I can’t BELIEVE that you would advise on using the same plunger for sinks and toilets!! I hope I never have to eat at your house where ever it is. People this guy says he puts the toilets plunger in his sink!! NASTY SIR!
Lol thanks, but why in the name of jesus would you be eating at my place!?
and technically, toilet augers are better for clearing toilet clogs than any plunger... yes they are more... but 4 hours with a plunger vs, 5 mins with an auger... that's money well spent...
@@gadooooo1 well he said you can. Never did he say you should or do.
YOU ARE PRO.
THANK YOU FOR SHEARING YOUR SKILL,,,,,......
BE POSITIVE AND ENJOY YOUR LIFE
Thank you very much buddy!
thanks thanks about this video, specially for the last tip, I have the same problem as you mentioned, but I need install 4 check valves for each return waste pipe. but it is gona be a big operation at home I need to dig 4 big wholes since all pipes are are underground, do you have any other suggestions to solve this waste return problem? thanks
could you use one 4 inch check valve on the main?
I remember my neighbor didn't have one of those back-flow valves in her home and the insurance didn't pay for the flood that happened. 10,000 in cleanup fees and repair
oh jeez, that hurts.
Insurance companies have exclusions for everything except paying the bill. Basically legalized extortion. 01-16-2020.
@@kevincounihan7432
Yap read the fine prints in home insurance. If you have a house in a low lying area, get yourself one of those. Better yet when it rains hard, get a shut off valve to completely close outside water coming back in. We were lucky our house wasn't affected.
I had two copper pipes come together and touch.
So I flux and solder them together .
Was that a bad idea?
It's not a bad idea ;)
Thanks
I thought if it was all one I would probably reduce water hammer
First time I hear this method, but yeah I don't see why it wouldn't work, just wipe any excess flux afterwards so it doesn't become green and eat up the pipes ;)
Nailed it Gary!
Against the code.
I am glad he added "Cat Liter" to the list of things not to flush down a toilet. Cat liter is nothing more than dried clay and dumping it in the toilet makes it melt and clings to the sides of the trap restricting the flow of water. It is extremely difficult to remove.
😉
Not to mention the cat!
I have to say I enjoy watching your videos sir! Very informative! Thank you
You are most welcome Brandon!!!
4:20
I always knew the kids “PoolNoodles” served alternative purpose. Ha
It’s pipe insulation available at any hardware store. Does look kinda like a pool noodle, but those are usually thicker and could damage your pipe. I get the resemblance though. 🙂
MISTAKE! A plunger is NOT meant to push a clog. It is meant to BREAK UP a clog!
It should be used by keeping it sealed and plunging up and down until the clog is loosened and broken up which allows it to drain down the pipe as it should. Trying to force a clog by just pushing the plunger will often NOT work and may serve to force the clog tighter into the pipe.
I always learn or remember something of your videos. Thanks
Mission accomplished 🙏
Thanks, I picked up some good tips watching this video.
Awesome, mission accomplished for me :)
I have been working as a plumber for 28 years and I always cool the joints after I solder them and I very rarely see a leak afterwards and have never had a call back for a leak on a soldered connection. If its going to leak it does so immediately and not hours or days later.
Exactly!
I’ve always cooled solder with a wet rag without issues. You do have to let it air cool for a minute but then after that you can cool it with water. As for the sewer check valve, that’s only if you have a basement or maybe live in the hills. In Texas there’s no frost line so we do slab or pier and beam but the plumbing is almost always several feet higher than the main so it’s not really an issue. Occasionally there are situations that need them but most of the time they dont
I did use the wet rag once and didn't end up with good solder..lesson learnt. Water has the capillary effect, which cools the solder unevenly resulting in a leak
That’s why you still let it air cool for 30 seconds or so. The rag is just so you can handle it sooner
Thanks for a great video
I about to redo the bath tub drain. I will make sure I put in the p-trap and use the right contact cement.
I doing this, since my landlord refuses to do anything except collect the rent.
Oh god, that sucks, anyways...good luck Jon!
You can put rent in an escrow account and he cant touch it until it's fixed. Call your local housing authority and they will point you to the right direction.
Well explained video. I have learned a lot from these.
🙏🙏🙏
The worst thing to clog the toilet is wipes. See it all of the time at work and at home
Tampons!! Swell up like rats
Never put anything in a toilet other than poop and toilet paper and the best is the 1 ply you will never need to call a plumber if you stick to this.
WHILE your videos are great !!! some information is a little misleading, the transition glue you recommend ( green glue) is only approved for the abs to pvc sewer transition outside the building, there is no "approved glue" for ANY transition "inside the building" shielded couplings are the only approved transition...... from a UPC AND IPC inspector, with over 49 years in the industry..... keep on you're doing great!!!!
Taking notes :)
Don’t, it’s not applicable in Canada at all. That would be ridiculous!
Good tip on converting a toilet plunger to a sink plunger. Here's my plunger tip: Don't try to push the clog down, try to pull the clog up. Push the plunger down slowly then pull it up quickly. Steve.
Thanks man! How do you get rid of the clog once it's in the bowl?! ;)
@@Got2Learn Grab it!
@@guhv1386 If there's an overflow. Toilet-no. Residential kitchen sink-no. Commercial kitchen sink-sometimes. Bathtub-yes. Basin/lavatory-yes. Slop sink-no. Double residential kitchen sink-plug one drain, residential kitchen sink connected with washing machine/dishwasher-look around.
3:57 this, all over my home sadly, its a Council property and they have hired some of the worst cowboys ive seen, they stop just sort of not doing the job but i think my plumbing would give you nightmares.
back when we (me and my mum) first moved into the place 35 years ago the places was a mess (its gotten a little better over the years but most of it would only be fixed if you rip everything out and start from scratch) it was christmas when the place was finished so when we got here it wasn't pretty the wiring was all crossed, in order to turn on the living room light we had to do out into the hall and the landing light was turned on from the living room, at the other side of the living room that turned on the kitchen and the kitchen switch turned on the living room, while i dont have evidence of it i can well imagine that out water system is in much the same state.