Philips 3 lights error - SOLVED

Philips EP1200 3 lights error, when you push start button ,the 3 red lights appear and you can't do anything,problem is from the brew group motor triac ( sometimes the motor too),BTA206x,but you need to check the motor resistance too,it must be around 75ohms,for correct runing.

[@MichiMess]

Thanks for the video! So my grinder is working when I connect it direct to power. But it does nothing in the machine. So it's something on the motherboard. I think I need to replace this bta 206x right?
EDIT: Thanks man!! That was indeed the problem!! Happy! 😊

[@isavv_]

Thank you for the video!I have the same problem but when it's time for the grinder motor to work..sometimes it will work and sometimes I get the 3 lights flashing.. I disassemble the grinder and cleaned it, everything working good. Do you know what might be the issue?

[@familiatanase4831]

Hello ! I have a problem to can u help.
the coffee machine turns on, starts to grind the coffee and after a few seconds after it started grinding, it stops and the 3 errors appear. what could it be? I opened the machine and found a full of ground coffee ... I found a broken part of the grinder where the ground coffee fits ... I repaired that part ... but the machine still tries to grind and stops. advice?

[@HiddenAura1]

Any luck... same problem

[@remanalex-cu5iv]

Hello, first, try to measure the motor resistance,it has to be around 60ohm,if it's bigger (around 100),than you have to change the motor.

[@09PRODFAN]

I have the same coffee maker, my problem is that when I turn it on, it tries to start all the systems and the 3 lights immediately start blinking. Will this fix it?

[@remanalex-cu5iv]

No,check temperature sensor.

[@paweslezak2323]

I have the same problem. Sensor temp and termistors are ok. Have you had a similar case?

[@MorteN7]

@@paweslezak2323 I have same problem.. Did u find the solution?

[@Adam-mv9ue]

Did you fix it?