4:24 ABSOLUTELY LOVE these hand truck/cart types and definitely the motorized versions. They make things so much better (notice didn’t say easier, b/c it still sucks moving units in/out of the places builders decide to install them, like no one ever thinks…..hey, if this needs replaced maybe should be in more accessible location 🤦🏼)……just sayin. But thanks for innovating and technology 👍🏻👍🏻
Mikey ....Have you ever replaced a memory card on a rheem modulating gas furnace ? If so do you just brake it off? having issues with my control board but need the original memory cars swapped.
Curious on the install. 1) How old was the old boiler and cause of replacement (saw leak, but wasn't repairable)? 2) Setting output at 190 on a mod-con....curious on efficiency at those higher temps. I had a mod-con installed 12 years back and installers put output at 180 and I spend a week realizing 130 would work for 95% of temps avoiding short cycling and adding efficiency so curious how that is determined (I don't have an outdoor temp monitor)?
No issue with the no hub on the air input side but on the exhaust side I doubt it complies with code, there’s no way it’s rated for the exhaust temperature
That model wm ...230 model 3 probably cost btwn 4-6k alone...and another 1-2k in parts/fittings/valves/ tanks/ pipe.. etc..etc...after that its all install $$...and those prices are retail...so most installers can make 10% or more on parts and boilers. They can add that bcse their company has warrantied all valves...one way valves....relays....etc..etc. If he charged 15k ..then it's about 7 or 8k in labor....then he pays his guys...and his insurance..and gas..taxes....health coverage...and he gets a whopping 1k ...lol Just guesstimating here. Btw..how is there no air scoop and air vent up high..... is criminal. toss it in. ..basic stuff broham. 😮
Fram Oil Filter Commercial of the Past. You can Pay Me Now or you can Pay Me Later. Don’t be a Dumb and Procrastinate because you’ll need your wallet. 🤪👎
4:24 ABSOLUTELY LOVE these hand truck/cart types and definitely the motorized versions. They make things so much better (notice didn’t say easier, b/c it still sucks moving units in/out of the places builders decide to install them, like no one ever thinks…..hey, if this needs replaced maybe should be in more accessible location 🤦🏼)……just sayin.
But thanks for innovating and technology 👍🏻👍🏻
Love it. WM manifold is a thing of beauty.
Always better when Daniel is on the job.
I’m impressed…..you said East Greenwich properly. 😂
Cool tree house!
It was the only place they could put the equipment.
Ahahahahha could you imagine @PipeDoctor
I’m Guessing Daniel is Saving his Sick Days for Later in the Year. 🤔😬👍🙏
You run into these where the supply air pipe rots out where it connects to the cast aluminimumuinimum.?
Noice work!
Not in the buget,but a tree house and heated?LOL...NICE.
Mikey ....Have you ever replaced a memory card on a rheem modulating gas furnace ? If so do you just brake it off? having issues with my control board but need the original memory cars swapped.
14k?
Curious on the install. 1) How old was the old boiler and cause of replacement (saw leak, but wasn't repairable)? 2) Setting output at 190 on a mod-con....curious on efficiency at those higher temps. I had a mod-con installed 12 years back and installers put output at 180 and I spend a week realizing 130 would work for 95% of temps avoiding short cycling and adding efficiency so curious how that is determined (I don't have an outdoor temp monitor)?
So how much more would installing a spirovent have been??
how was it running up those stairs?
Great video. Is your live fire classroom for Pipe Doctor employees of your company, or is your class open to all? Thank you.
Open to all
@@PipeDoctor Thank you.
Love it , says who would use a no hub coupling , then re uses said coupling
No issue with the no hub on the air input side but on the exhaust side I doubt it complies with code, there’s no way it’s rated for the exhaust temperature
I've been teaching everyday for 12 years yet you still have your head shoved up your ass........disappointing.
Hi Nana Clare, are you watching?
Hey mike what's the average cost of water heater replacement 40 Gal short (Gas)
email me for pricing
mike@pipedoc.net
Also my copper gas line needs replaced it's not longer allowed by code in Pa.
@@michaelyoung394What Size Tank and Gas or Electric ?
Mikey they must be from Alabama kissing cousins 😂
Love the new intro!
ty
nice job Mike👍
Thanks 👍
Pipes
Hacks bring me stacks. What's wrong with this install?
You should count how many times a day you say "NOT TOO SHABBY" . I say the over under is 50.
Pay up Brown boy gezze lol
25 grand$ ?
not even close!
@ lower?
That model wm ...230 model 3 probably cost btwn 4-6k alone...and another 1-2k in parts/fittings/valves/ tanks/ pipe.. etc..etc...after that its all install $$...and those prices are retail...so most installers can make 10% or more on parts and boilers. They can add that bcse their company has warrantied all valves...one way valves....relays....etc..etc.
If he charged 15k ..then it's about 7 or 8k in labor....then he pays his guys...and his insurance..and gas..taxes....health coverage...and he gets a whopping 1k ...lol
Just guesstimating here.
Btw..how is there no air scoop and air vent up high..... is criminal. toss it in. ..basic stuff broham. 😮
Fram Oil Filter Commercial of the Past. You can Pay Me Now or you can Pay Me Later. Don’t be a Dumb and Procrastinate because you’ll need your wallet. 🤪👎
JP&MP Balls Deep Podcast…..
JP is scared
🥃
hi
Let’s go!!! First