Это видео недоступно.
Сожалеем об этом.
2016 2017 2018 Honda Civic Fender Liner Removal How to Remove Replace Install 10th Gen
HTML-код
- Опубликовано: 23 май 2018
- Step by Step how to remove the fender liner on a 10th Gen Honda Civic.
2016 2017 Honda Civic Fender Liner Driver side - amzn.to/3x721jF
2016 2017 Honda Civic Fender Liner Passenger Side -- amzn.to/3maOORM
Stubby 1/4” Phillips Socket - amzn.to/2IoCnAr
Pick Tool Set - amzn.to/2IlmtXg
Lower Rear Fender Clip -- amzn.to/2DCjrLj
Two Piece Fender Clip -- amzn.to/2HmSNF6
Bumper Plastic Clips -- amzn.to/2BYzTFd
Clip Tool --- amzn.to/2idpCsn
Replacement Flat Screw --amzn.to/3x4EuzD
Replacement Screw with Washer --amzn.to/3zhRuon
Affiliate Links
Some links in this description may be affiliate links. By clicking on the links, I may receive a small commission at no extra cost to you. Thank you for your support!
Honestly, I would remove the wheel. I take like 5 minutes and give so much comfort working around it
Wow thx man you made my day, clip with two middle part is hard to come off, but you do it spot on easy....helpful info
Thanks, excellent video. Now to go try this!!!
Thanks man! I have to replace the lining myself and the two pins with up/bottom clip were very helpful!
Great video, I need one for replacing the driver side front fender closing plastic
Thanks it was very healpfull
how about the rears? I have a hatchback..
Appreciated 👍
Any links for canada cant buy any of these :/
Thank you for the video! At 2:33… What is the name of the cover that the 3 bolts is holding? 🙏
Y are the best
Thanks for tour vídeo. One question: i had a little Crash ( you know, one of the columns in my garage moved) and i have Broken one of the bumper tabs, exactly where there are two screws on the Fender outer side, holding both,the Fender liner and the bumper toghether. The thing os that I want to repair them and watching vídeos around, de only way I find is too melt plastic and rebuild the tan and fender. Anyone have an idea of what kind of plastic are both,the bumper and the fender liner made of?
Thanks for reading.
Cool
Awesome video!
Thanks!
Is this the same for a 2019 EX?
Same for 9th gen accords??
replacement screw for fender is in the description?
2016 civic mirror cap removal and shark fin removal next!
ruclips.net/video/Uzi5JbRcJdI/видео.html
I have a 2012 Honda Accord there's a rubber tube in there. Could anyone tell me what that is? Please
Imagine putting it back 😱
Why did not remove tire first ?
I was thinking the same thing.
How much fender liner left side model 2017
Hello,do you have any video on how to take off tailgate trim on a 2018 civic??.
Thanks for the videos. What sizes screws would you need for a Honda CRV 2018? If I am missing the screws?
Here is the two possible screws you will need
Flat Screw --amzn.to/3x4EuzD
Screw with Washer --amzn.to/3zhRuon
@@DIYHonda thank you
Hi , have a question, 2012 Honda Civic fender liner compatible on a 2015 Honda Civic si? Thanks. Jojo
No
Why wouldn't you just remove the wheel entirely?
Then it needs a reallignment againn
@@EriqHover So every time I pull my tire off, I need an alignment? I don't think so.
@@EriqHover Take the TIRE off and then re-mount it will require balancing. Wheel alignment after taking the wheel off? I don't think so.
Quick question, how many clips were there in total and how many were normal clips and how many were the up and bottom clips
Can I do this without a car jack??
No
You can use the one that comes with the car
Need new fender liner for driver side BAAAAD idk how it happened. this freak accident happened where my bumper caught something sticking up out of the ground totally caught underneath my bumper in combination of backing out, my tire totally shredded the liner, looked like a wildcat attack
same brotha 😢
Is 2019 different? I dont understand why my year is always alone with everything
Do you have a hatch?
. Not
I am struggling to remove the clips you used the screw driver pressing them in from behind. I gave up lol.
The two piece clip or the one piece clips with the pins on both sides?
@@DIYHonda the circular front where you can put holes in for adding mud flaps with the square back w 2 side clips that hold into metal fender. Do they make a special tool or is the small screw driver or spring clip the only way to go. Thanks
I’m not aware of any special tool but I’ve always been able to get it with a small screw driver and a hook tool. Are you trying the top and bottom then also the front and back of the clip?
@@DIYHonda yeah. I’ll figure it out. You just made it look so easy haha. It’s actually for a Ridgeline but same clip and location. I have to pull the plastic fender cladding on bottom off too. Thanks so much for putting out these videos.
@@daveroski yeah, they use these clips on many of their models. Make sure you are putting some outward pressure on that fender liner, so that way when you do hit the tab you will feel it give.
I would have took the tire off
me too. Even with Eriq stating tire removal throws off alignment.