Question, so say I have a dual color light module. If I place that light to a simple alternating back and forth pattern would this unit flash both colors? Could you guys do a video on the feniex flasher with maybe some Fenix surface mounts?
So if you want to connect to led tail lights do you t-tap into existing power or ground of vehicles tail lights ?or does existing tail light need to be cut from vehicles wiring and ran thru module?stand alone lights I get NP. BUT that diagram feniex gives doesn't explain existing vehicles lights...any help would be greatly appreciated
How is the steady burn feature activated? Would it be programmed to one of the 3 mode terminals? So for instance, can i have one switch to turn the lights on 'steady', and then another switch to turn them on as strobes?
I’m trying to find light heads to use with this flash controller besides white work lights. I’m a firefighter so I’m looking for red and white light heads. I’ve tried a wide variety of different brand surface mounts that have internal flasher controllers but they do not work I can not find any light heads that do not contain the internal flash controller. I want to use the steady burn mode.
Is it possible to control dual color lights with this module? For example I have white/red Strobes n more E4, but I am unsure if its possible to sync 4 of these E4 lights with this module, and I cannot find an answer anywhere.
Our Feniex Representative replied back to me.Here is what he said " You should be able to sync other manufacturers' lights with our flasher no problem! It may not work with the SNM lights, but generally speaking, I haven't found a single light it doesn't work with yet!"
How many channel’s does it have? The im hoping i can run anywhere from 2-4 lights per channel. Im also planning to try and run the manufacture lights for f possible but im hoping i can find a device that will over ride the manufacture lights at night and will still turn in during the day when my manufacture lights dont need to be used.
Yes you can do that! Here is how:To synchronize more than one Flasher unit, activate the same flash pattern on all units and connect the ‘Pattern Changer / Sync’ terminals together.
Does this flasher have Traffic advisor arrow capability? Like if i get single surface mounts and hook them up will it give me traffic advisor patterns with individual T3 for example . im doing an all feniex setup and im trying to cut cost of buy the expensive lightbars
That is not true! I placed 8 Fusion Surface Lights and Strobes N' More TailGator Taillight all on steady mode. All lights work with different flash patterns using this flasher.
@@UltraBrightLightz thanks so one flasher would be able to connect to both headlights and taillights and then connect to a switch to turn on and off with rest of my emergency lights on vehicle?
@@commanderhall848 You will need one flasher for the headlights and a second flasher for the taillights.You will then be able to connect it to a switch so they turn on with the rest of your lights
@@commanderhall848 We do not have one that can be used for both.We have been told by our Feniex Representative that using 2 is the best way to install it
Question, so say I have a dual color light module. If I place that light to a simple alternating back and forth pattern would this unit flash both colors? Could you guys do a video on the feniex flasher with maybe some Fenix surface mounts?
The light is not able to do both colors at the same time - it would still alternate. We are working on making more videos using the 4 Output Flasher!
So if you want to connect to led tail lights do you t-tap into existing power or ground of vehicles tail lights ?or does existing tail light need to be cut from vehicles wiring and ran thru module?stand alone lights I get NP. BUT that diagram feniex gives doesn't explain existing vehicles lights...any help would be greatly appreciated
Your best option will be to speak to someone at Feniex in their Technical Support Department.They will be able to answer your question! 1-800-615-8350
Same question
@justintracy1374 you would need to cut the factory harness and run the light feed through the feniex flasher
Would this work to put a wig wag pattern on my hazzard lights of a 2023 Hyundai Venue?
Yes!
How is the steady burn feature activated?
Would it be programmed to one of the 3 mode terminals?
So for instance, can i have one switch to turn the lights on 'steady', and then another switch to turn them on as strobes?
Yes that is correct!
Can i use this to install a headlight wig wag for my 2016 hyundai tucson?
Yes!
Why does everyone do videos on this product with external lights and not existing vehicles lights like led tails etc...
There is a video where someone installed the Feniex Flasher on a white Jeep and it is hooked up to flash the headlights
I’m trying to find light heads to use with this flash controller besides white work lights. I’m a firefighter so I’m looking for red and white light heads. I’ve tried a wide variety of different brand surface mounts that have internal flasher controllers but they do not work I can not find any light heads that do not contain the internal flash controller. I want to use the steady burn mode.
That should work on any light head,internal flasher or not..I know they work with feniex t3's, cannons,fusions
Sorry I am not too sure who makes lights that do not have a flasher in them for emergency vehicle use
Is it possible to control dual color lights with this module? For example I have white/red Strobes n more E4, but I am unsure if its possible to sync 4 of these E4 lights with this module, and I cannot find an answer anywhere.
I am not sure but I have reached out to my Feniex Representative for an answer.As soon as I hear back from him I will post his answer!
Our Feniex Representative replied back to me.Here is what he said " You should be able to sync other manufacturers' lights with our flasher no problem! It may not work with the SNM lights, but generally speaking, I haven't found a single light it doesn't work with yet!"
How many channel’s does it have? The im hoping i can run anywhere from 2-4 lights per channel. Im also planning to try and run the manufacture lights for f possible but im hoping i can find a device that will over ride the manufacture lights at night and will still turn in during the day when my manufacture lights dont need to be used.
There are four outputs rated at 5amps each!
Hi I have a question I've got one flasher and I want to get another one and connect them up together will they sync up with each other or no
Yes you can do that! Here is how:To synchronize more than one Flasher unit, activate the same flash
pattern on all units and connect the ‘Pattern Changer / Sync’ terminals
together.
Does this flasher have Traffic advisor arrow capability? Like if i get single surface mounts and hook them up will it give me traffic advisor patterns with individual T3 for example . im doing an all feniex setup and im trying to cut cost of buy the expensive lightbars
The T3's have built in patterns so the 4 Output Flasher is not really needed for that setup
@@UltraBrightLightz so if i didnt want to get a stick i could just get several t3 and spread them out and they would work traffic arrows?
@@ReaperCVPI I think you would have a hard time syncing them to do that so a stick light would be better
@@UltraBrightLightz gotcha i was going with a stick if i couldnt do that . i appreciate your help
@@ReaperCVPI You're welcome!
Are the V3 Fusion Surface Mounts compatible with this flasher if they are on a steady burn pattern?
The Feniex 4 Output Flasher is made for lights that do not have a built in flasher so it would not work with the Fusion Surface Mount Lights
That is not true! I placed 8 Fusion Surface Lights and Strobes N' More TailGator Taillight all on steady mode. All lights work with different flash patterns using this flasher.
Hi, may i know the steps to install it on tail light?
No problem! Please click on this link:www.ultrabrightlightz.com/content/Manuals/2020/4xFlasherManual-v2-0.pdf
Can this be used on headlights and taillights?
Yes!
@@UltraBrightLightz thanks so one flasher would be able to connect to both headlights and taillights and then connect to a switch to turn on and off with rest of my emergency lights on vehicle?
@@commanderhall848 You will need one flasher for the headlights and a second flasher for the taillights.You will then be able to connect it to a switch so they turn on with the rest of your lights
@@UltraBrightLightz are there any other flashers that can be used on both headlights and taillights together?
@@commanderhall848 We do not have one that can be used for both.We have been told by our Feniex Representative that using 2 is the best way to install it
Need a flash Pattern video there is none to be found
We are always working on new videos! Please stay tuned!
Could you hook up whelen ions to it?
Yes
What happened to Justin? Not being mean but I liked him better.
Justin is here! He is just working on other projects