How to replace HVAC dashboard bulbs on
HTML-код
- Опубликовано: 17 ноя 2024
- Extraction Tools: s.click.aliexpr...
Removal Tools:
s.click.aliexp...
T10 Led 8 smd:
s.click.aliexp...
T5 led:
s.click.aliexp...
Replacement Opel Vauxhall Bulbs lights
Led w2w T5 SMD
How to change the HVAC control panel light bulbs in a 2008 Corsa D
how to fix hvac clima heater control panel light
#CorsaD #Opel #Vauxhall
Finally someone who didn't broke half of the plastic clips and didn't put anoying ass music over the video
I end up coming back here once a year just to remember the clip pattern on the fascia as between all 3 kids, all of them have a damn corsa d, cheers mate
Thank you! I didn't even know this should light up :D
Everything came out so easy for you and i was struggling taking out the bulbs 😂
Great video, thanks - job done in 10mins on my boys Corsa. Important to have the trim tools rather than screwdrivers, ensures no damage to fascia 👍
Super - i can see, wehre the bulb for the instrument are... Thanks a lot !!!
How do I stop lights flickering my both lights I had previously are burst and I went for blue and I tried your way but doesn't worn
Attention! Some dealers will sell you 2.5watt bulbs instead of 1.25W. this will cause the bulbs to fail quickly again and will make sure all the see through plastic around the bulbs does melt and gets the bulbs stuck forever! Don't make the same mistake then me and get the right 1.25W bulbs!!!
Great vid, how many bulbs in total is it, 2?
Yes, 2
XoN GameDroid thankyou
I’m looking to change the bulbs so it lights up red instead of orange ? What bulbs would I need to do this ?
t5 are available in many colors. make sure they are powerful enough, so that the light will eventually be visible enough.
Hi there, do these tiny bulbs just pull out? Can't get mine to budge... Seem stuck in there... 🙁
Are they t5 or t10? You put both in the description
t5, I used a t10 plate with 8 smd and put on the t5 plug to make more light :)
Yo man i need your help! I need to sort out all of the cable, and the previous owner did cut some of the cables off. In order to get to those cables i need to remove the white piece as shown when you removed the heating panel. Do u know if and how to remove this? So i can have more space to sort out all of the cables
Very late comment u probably done it now but yes it comes off pry at the white plastic tabs all round and there’s two screws on top aswell I believe then it pulls towards you
Thanks for that video, very helpfull, cheers 🍻
what is this car charger did you have a link??
Whats the orange tool you use...
Car removal tools i let a link in the description
I have change the bulb but it keeps blinking, hiw can i turn off the blink? Thanks
Thanks for de video.
Can you give me the reference of the origin lamp? Thx
T5
Have you any idea on how to get the knobs out? Do they pull out or push out from behind? Just before I take mine apart thanks
This is a super late comment you probably don’t have the car or have figured it out by now but they clip on all the way round and just pry at the tabs as u push on them they push out the way
So you used 2 bulbs and kept the one in the middle so it won't blink?
With all bulbs led will blink, you have to use canbus led bulbs, or use one normal bulb and one led, or both normal.
How you removal the radio cover without that tool?
4 common nails and use a screwdriver or a plastic tool (recommended) to remove the radio from the edge
Как называются лампочки? Модель пожалуйста
So easy. Thanks so much. Liked and subd
What are the light bulbs called?
w2w T5
@@XoNGameDroid thanks
Гуд👍
Bulbs colour ? White and yellow ?
I use one led white and one yellow normal bulb
@@XoNGameDroid thank you 👌